Precise measurement of physical quantities plays a crucial role in the development of science and technology.The main purpose of the dissertation is two-fold: to investigate the ultimate precision for estimation of physical quantities using Gaussian states and to propose an efficient method for certification of Bayesian error region in general quantum parameter estimation.In the first part, we begin with analyzing sensitivity for estimating a phase difference in an optical interferometer.Optical interferometry is widely used in science and industry for measuring small displacements.Recently, a large-scale optical interferometer socalled the Laser interferometer Gravitational-Wave Observatory (LIGO) has succeeded in detecting a gravitational wave, the signal of which is extremely small.On the other hand, it has been shown that a non-classical feature of quantum states can improve the sensitivity of estimation, such as in optical interferometer, including the LIGO.From a practical point of view, we inspect the practically achievable precision using non-classical Gaussian states in Mach-Zehnder interferometer with feasible measurements and realistic photon loss.We then investigate the precision of single-mode phase estimation using Gaussian measurement, which can be realized by using homodyne detection, and i show that non-Gaussian measurement is necessary to utilize the power of Gaussian input probes optimally.Finally, we find the optimal measurement for general Gaussian quantum metrology and identify three distinct optimal measurements corresponding to different circumstances.In the second part, we study the Bayesian error region, which is a crucial concept for a general estimation process.When estimating a physical quantity, one has to supply the error interval (single-parameter) or error region (multi-parameter) as well as the estimate.However, it has been shown that as the dimension of quantum systems of interest grows, it becomes intractable to calculate the size and credibility of Bayesian error regions.As an alternative, we derive an analytical expression for the properties, the size and credibility, of Bayesian error regions, in an asymptotic regime.We then propose an efficient numerical method to calculate them for high-dimensional quantum systems even in a non-asymptotic regime.
Precise measurement of physical quantities plays a crucial role in the development of science and technology.The main purpose of the dissertation is two-fold: to investigate the ultimate precision for estimation of physical quantities using Gaussian states and to propose an efficient method for certification of Bayesian error region in general quantum parameter estimation.In the first part, we begin with analyzing sensitivity for estimating a phase difference in an optical interferometer.Optical interferometry is widely used in science and industry for measuring small displacements.Recently, a large-scale optical interferometer socalled the Laser interferometer Gravitational-Wave Observatory (LIGO) has succeeded in detecting a gravitational wave, the signal of which is extremely small.On the other hand, it has been shown that a non-classical feature of quantum states can improve the sensitivity of estimation, such as in optical interferometer, including the LIGO.From a practical point of view, we inspect the practically achievable precision using non-classical Gaussian states in Mach-Zehnder interferometer with feasible measurements and realistic photon loss.We then investigate the precision of single-mode phase estimation using Gaussian measurement, which can be realized by using homodyne detection, and i show that non-Gaussian measurement is necessary to utilize the power of Gaussian input probes optimally.Finally, we find the optimal measurement for general Gaussian quantum metrology and identify three distinct optimal measurements corresponding to different circumstances.In the second part, we study the Bayesian error region, which is a crucial concept for a general estimation process.When estimating a physical quantity, one has to supply the error interval (single-parameter) or error region (multi-parameter) as well as the estimate.However, it has been shown that as the dimension of quantum systems of interest grows, it becomes intractable to calculate the size and credibility of Bayesian error regions.As an alternative, we derive an analytical expression for the properties, the size and credibility, of Bayesian error regions, in an asymptotic regime.We then propose an efficient numerical method to calculate them for high-dimensional quantum systems even in a non-asymptotic regime.
Optical and optomechanical systems are exploited for quantum technologies to perform highly precise measurements for fundamental physics as well as biological and engineering tasks. Theoretical studies using tools from statistics and quantum information can greatly aid studies of the sensing capabilities of quantum systems and experimental designs. These allow us to quantify the amount of information about a parameter encoded in a quantum state itself and examine how that can be extracted through measurements. In this thesis we show how mechanical squeezing and measurements beyond position can be utilised to improve the precision of wavepacket expansion measurements which can test collapse models of quantum mechanics. Particularly, that squeezing can compensate for the free-fall time which is often the most significant limiting factor in such experiments, and measurements of other quadratures can offer increased precision. We demonstrate that the use of additional optical fields to measure the displacement of a free mass in a radiation-pressure limited interferometer cannot surpass the ultimate precision of the single-mode interferometer. This work applies to the likes of laser-interferometric gravitational wave detectors. Finally, we venture into multi-parameter estimation: we calculate bounds for multi-mode Gaussian states used to estimate many phase shifts and optimise over the input states. In contrast to the—far less experimentally feasible—multi-mode generalisations of N00N states we see no significant improvement when using multi-mode Gaussian states for the task. Given their comparable performance in single-phase estimation this is a new limitation of Gaussian states appearing only at the multi-parameter level.
The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these
Results concerning the construction of quantum Bayesian error regions as a means to certify the quality of parameter point estimators have been reported in recent years. This task remains numerically formidable in practice for large dimensions and so far, no analytical expressions of the region size and credibility (probability of any given true parameter residing in the region) are known, which form the two principal region properties to be reported alongside a point estimator obtained from collected data. We first establish analytical formulas for the size and credibility that are valid for a uniform prior distribution over parameters, sufficiently large data samples and general constrained convex parameter estimation settings. These formulas provide a means to an efficient asymptotic error certification for parameters of arbitrary dimensions. Next, we demonstrate the accuracies of these analytical formulas as compared to numerically computed region quantities with simulated examples in qubit and qutrit quantum-state tomography where computations of the latter are feasible.
The number of times that we can access a system to extract information via quantum metrology is always finite, and possibly small, and realistic amounts of prior knowledge tend to be moderate. Thus theoretical consistency demands a methodology that departs from asymptotic approximations and restricted parameter locations, while practical convenience requires that it is also flexible and easy to use in applications with limited data. We submit that this methodology can and should be built on a Bayesian framework, and in this thesis we propose, construct, explore and exploit a new non-asymptotic quantum metrology. First we show the consistency of taking those solutions that are optimal in the asymptotic regime of many trials as a guide to calculate a Bayesian measure of uncertainty. This provides an approximate but useful way of studying the non-asymptotic regime whenever an exact optimisation is intractable, and it avoids the non-physical results that can arise when only the asymptotic theory is used. Secondly, we construct a new non-asymptotic Bayesian bound without relying on the previous approximation by first selecting a single-shot optimal quantum strategy, and then simulating a sequence of repetitions of this scheme. These methods are then applied to a single-parameter Mach-Zehnder interferometer, and to multi-parameter qubit and optical sensing networks. Our results provide a detailed characterisation of how the interplay between prior information, correlations and a limited amount of data affects the performance of quantum metrology protocols, which opens the door to a vast set of unexplored possibilities to enhance non-asymptotic schemes. Finally, we provide practical researchers with a numerical toolbox for Bayesian metrology, while theoretical workers will benefit from the broader and more fundamental perspective that arises from the unified character of our methodology.
Science relies on our practical ability to extract information from reality, since processing this information is essential for developing theories that explain our world. This thesis is precisely the study of how to extract and process information using quantum systems when a constrained amount of resources means that the available data is limited. The natural framework for this task is quantum metrology, a set of tools to model and design quantum measurement strategies. Equipped with this theory, we advocate a Bayesian approach as the appropriate formalism to study systems with a finite amount of resources, which is a non-asymptotic problem, and we propose a methodology for non-asymptotic quantum metrology. To start with, we show the consistency of taking those solutions that are optimal in the asymptotic regime of many trials as a guide to calculate a generalised measure of uncertainty in the Bayesian framework. This provides an approximate but useful way of studying the non-asymptotic regime whenever a direct Bayesian optimisation is intractable, and it avoids non-physical results that can arise when only the asymptotic theory is employed. Secondly, we construct a new non-asymptotic Bayesian bound without relying on the previous approximation by first selecting the optimal quantum strategy for a single shot, and then simulating a sequence of repetitions of this scheme, which is suitable for experiments where we do not wish or cannot correlate different trials. These methods are applied to a Mach-Zehnder interferometer, which is a single-parameter problem, and to quantum sensing networks where the nodes are either qubits or optical modes, which are multi-parameter protocols. Our results provide a detailed characterisation of how the interplay between prior information, entanglement and a limited amount of data affects the performance of quantum metrology protocols, which has important implications for the analysis of theory and experiments in this field.
Bayesian analysis is a framework for parameter estimation that applies even in uncertainty regimes where the commonly used local (frequentist) analysis based on the Cramer-Rao bound (CRB) is not well defined. In particular, it applies when no initial information about the parameter value is available, e.g., when few measurements are performed. Here, we consider three paradigmatic estimation schemes in continuous-variable (CV) quantum metrology (estimation of displacements, phases, and squeezing strengths) and analyse them from the Bayesian perspective. For each of these scenarios, we investigate the precision achievable with single-mode Gaussian states under homodyne and heterodyne detection. This allows us to identify Bayesian estimation strategies that combine good performance with the potential for straightforward experimental realization in terms of Gaussian states and measurements. Our results provide practical solutions for reaching uncertainties where local estimation techniques apply, thus bridging the gap to regimes where asymptotically optimal strategies can be employed.