Abstract The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilizing this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5 × 10 15 molecules per steradian per second at 923 K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v = 0 , J = 7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionization spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30 K and reduce its most probable forward velocity from 600 m s − 1 to 200 m s − 1 . In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalize to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapor may enable direct loading of a molecular magneto-optical trap.
The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilising this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is
5×1015 molecules per steradian per second at 923~K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the
v=0,
J=7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionisation spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30~K and reduce its most probable forward velocity from 600~ms
−1 to 200~ms
−1. In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalise to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapour may enable direct loading of a molecular magneto-optical trap.
Cryogenic buffer gas beams are central to many cold molecule experiments. Here, we use absorption and fluorescence spectroscopy to directly compare molecular beams of AlF, CaF, MgF and YbF molecules, produced by chemical reaction of laser ablated atoms with fluorine rich reagents. The beam brightness for AlF is measured as 2×1012 molecules per steradian per pulse in a single rotational state, comparable to an Al atomic beam produced in the same setup. The CaF, MgF and YbF beams show an order of magnitude lower brightness than AlF and far below the brightness of Ca and Yb beams. The addition of either NF3 or SF6 to the cell extinguishes the Al atomic beam, but has a minimal effect on the Ca and Yb beams. NF3 reacts more efficiently than SF6, as a significantly lower flow rate is required to maximise the molecule production, which is particularly beneficial for long-term stability of the AlF beam. We use NO as a proxy for the reactant gas as it can be optically detected. We demonstrate that a cold, rotationally pure NO beam can be generated by laser desorption, thereby gaining insight into the dynamics of the reactant gas inside the buffer gas cell.