Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Improved Quantum State Tomography for Superconducting Quantum Computing Systems

Tao Xin

Published Jun 29, 2020• 7 citations
OpenAlex

Abstract

Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, unfortunately with the exponential number of the measurements. As one of the main stream quantum platforms, superconducting quantum computing (SQC) system at least requires $3^n$ measurement settings consisted of single-qubit readout operators in reconstructing a $n$-qubit state. In this work, I add the 2-qubit evolutions as the readout operators, and propose an optimal tomographic scheme with the cost-reduced measurements using the integer programming. In detail, I present the minimum number of required measurements to fully reconstruct a state for the Nearest-Neighbor, 2-Dimensional, and All-to-All connectivities on SQC qubits. It is shown that this method can reduce the number of measurements by over 60% compared with the previous state tomography on SQC systems. It is expected that the experimentalist from SQC field can directly utilize the ready-made results for reconstructing quantum states involved in their research. Besides, this method can be applied to reduce the complexity of traditional state tomography in some quantum platforms including but not limited to SQC systems.

Related papers

Improved quantum state tomography for systems with XX+YY couplings and Z readouts

Tao Xin

Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX$+$YY-type couplings and $Z$ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires ${3}^{n}$ measurement settings in reconstructing an $n$-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.

arXiv:2006.15872•Physical Review A•Nov 10, 2020•9 citations

Multi-qubit State Tomography with Few Pauli Measurements

Xudan Chai, Teng Ma, Qihao Guo +3 more

In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, Quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is less practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multi-qubit quantum states. Furthermore, this schema was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternatively effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.

arXiv:2305.19873•May 31, 2023•0 citations

Optimal design of measurement settings for quantum-state-tomography experiments

Jun Li, Shilin Huang, Zhihuang Luo +3 more

Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.

arXiv:1705.01524•Physical Review A•Sep 6, 2017•25 citations

Multiqubit State Tomography with Only a Few Pauli Measurements

Xudan Chai, Teng Ma, Qihao Guo +3 more

In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.

Physical Review Applied•Sep 18, 2023•2 citations

Efficient quantum state tomography with auxiliary systems

Wenlong Zhao, Da Zhang, Huili Zhang +2 more

Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of $O(d^2)$, significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.

arXiv:2507.16532•Physical Review A•Mar 2, 2026•0 citations

Quantum Measurement on a Budget

Dylan H. Mahler

Quantum computation - the use of quantum systems as bits, or qubits, to perform computation - has been proven to be exponentially faster than what is thought possible with classical computation for several tasks. Quantum computers have the unique ability to store an amount of information that is exponential in the number of constituent particles used to encode that information. This property, which is arguably where quantum computers derive their power, makes it very difficult to characterize quantum systems. In order to fully characterize an unknown quantum state, a series of measurements must be performed on it and the state deduced from the results of those measurements. This process, called quantum tomography, is known to require exponential resources in the number of qubits. Both the number of measurements - the measurement complexity - and the number of times each measurement must be repeated - the sample complexity - present serious challenges when performing tomography. In addition, the measurement apparatus itself, which is usually a quantum system, must be characterized leading to even more experimental complexity. Here, I present three experiments which aim to reduce the experimental complexity of quantum tomography. The first aims to reduce the number of measurements needed to locate the decoherence-free subspaces of a noisy quantum channel. The process of locating these subspaces, which would normally require full process tomography, is performed with quadratically fewer measurement settings. The second experiment aims to characterize both an uncalibrated measurement apparatus and an unknown quantum state at the same time. With a specific model of measurement, it is found that an uncalibrated parameter of the measurement can be directly extracted using a single measurement. In the third experiment, I perform an experiment in which the optimal sample complexity for quantum state tomography is obtained using adaptivity: the ability to change measurement settings part way through an experiment. All three experiments were performed using the polarization degree of freedom of photons generated by spontaneous parametric downconversion. The source of photon pairs and the measurement techniques used are described in detail, along with the theory of quantum distinguishability and its relevance to tomography.

•Jun 1, 2015•0 citations
Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, unfortunately with the exponential number of the measurements. As one of the main stream quantum platforms, superconducting quantum computing (SQC) system at least requires 3n3^n3n measurement settings consisted of single-qubit readout operators in reconstructing a nnn-qubit state. In this work, I add the 2-qubit evolutions as the readout operators, and propose an optimal tomographic scheme with the cost-reduced measurements using the integer programming. In detail, I present the minimum number of required measurements to fully reconstruct a state for the Nearest-Neighbor, 2-Dimensional, and All-to-All connectivities on SQC qubits. It is shown that this method can reduce the number of measurements by over 60% compared with the previous state tomography on SQC systems. It is expected that the experimentalist from SQC field can directly utilize the ready-made results for reconstructing quantum states involved in their research. Besides, this method can be applied to reduce the complexity of traditional state tomography in some quantum platforms including but not limited to SQC systems.
Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX+++YY-type couplings and ZZZ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires 3n{3}^{n}3n measurement settings in reconstructing an nnn-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, Quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is less practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multi-qubit quantum states. Furthermore, this schema was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternatively effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of O(d2)O(d^2)O(d2), significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.
Quantum computation - the use of quantum systems as bits, or qubits, to perform computation - has been proven to be exponentially faster than what is thought possible with classical computation for several tasks. Quantum computers have the unique ability to store an amount of information that is exponential in the number of constituent particles used to encode that information. This property, which is arguably where quantum computers derive their power, makes it very difficult to characterize quantum systems. In order to fully characterize an unknown quantum state, a series of measurements must be performed on it and the state deduced from the results of those measurements. This process, called quantum tomography, is known to require exponential resources in the number of qubits. Both the number of measurements - the measurement complexity - and the number of times each measurement must be repeated - the sample complexity - present serious challenges when performing tomography. In addition, the measurement apparatus itself, which is usually a quantum system, must be characterized leading to even more experimental complexity. Here, I present three experiments which aim to reduce the experimental complexity of quantum tomography. The first aims to reduce the number of measurements needed to locate the decoherence-free subspaces of a noisy quantum channel. The process of locating these subspaces, which would normally require full process tomography, is performed with quadratically fewer measurement settings. The second experiment aims to characterize both an uncalibrated measurement apparatus and an unknown quantum state at the same time. With a specific model of measurement, it is found that an uncalibrated parameter of the measurement can be directly extracted using a single measurement. In the third experiment, I perform an experiment in which the optimal sample complexity for quantum state tomography is obtained using adaptivity: the ability to change measurement settings part way through an experiment. All three experiments were performed using the polarization degree of freedom of photons generated by spontaneous parametric downconversion. The source of photon pairs and the measurement techniques used are described in detail, along with the theory of quantum distinguishability and its relevance to tomography.