Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Accurate atom counting for entanglement-enhanced atom interferometry

Andreas Hüper

Published Jan 1, 2020• 0 citations
Publisher

Abstract

Atom interferometers belong among today's most precise sensors and offer a broad range of possible metrological applications. Given their ability to measure accelerations and rotations precisely, they are suitable for inertial sensing, navigation and geodesy. Beyond this, they proved indispensible for time-keeping as well as fundamental research. This explains why the improvement of achievable sensitivities of atom interferometers is of particular interest. However the sensitivity of atom interferometers is fundamentally restricted by the standard quantum limit. The standard quantum limit can only be surpassed by employing entangled many-partice states. Entangled states, such as the twin-Fock state, allow atom interferometers to improve the phase sensitivity beyond the standard quantum limit, but they are reliant on an accurate detection of the interferometric out come. In this work, an experimental apparatus is designed and set up that will allow for routine generation of highly entangled twin-Fock states in a Rubidium-87 spinor Bose-Einstein condensate. As the main feature of this apparatus, an accurate atom counting fluorescence detection has been implemented. This detection achieves single-particle resolving fluorescence measurements for 1 up to 30 atoms. According to the noise analysis the single-atom resolution extends to a limiting atom number of 390(20) atoms. The implemented quadrupole coils with their strong gradient of up to 300 G/cm offer a tight confinement that in combination with the 55 W optical dipole trap laser will enable a fast repetition rate of the creation of highly entangled quantum states.

DOI
10.15488/9830

Related papers

Entanglement-enhanced interferometry using single-atom resolved Twin-Fock states in 87Rb BECs

Dominik Köster, Martin Quensen, Mareike Hetzel +2 more

Atom interferometers are among the most sensitive tools in quantum metrology but are typically limited by the standard quantum limit (SQL). Entangled input states can surpass this bound and approach Heisenberg scaling. We present a metrology-ready 87Rb platform that combines sub-500 ms Bose-Einstein condensate (BEC) production in time-averaged optical potentials with state-resolved, single-atom-resolved detection. We create high-fidelity Twin-Fock states via spin-changing collisions and observe Hong-Ou-Mandel-type atomic interference of up to 10 atoms. Using these states' near-perfect number correlations for heralding, interferometry can be perfomed with large Dicke states for sub-SQL metrology at total atom numbers of 1000 and beyond.

•Jan 1, 2026•0 citations

Preparation of mesoscopic atomic ensembles with single-particle resolution

Andreas Hüper, Cebrail Pür, Hetzel, M. +7 more

The analysis of entangled atomic ensembles and their application for interferometry beyond the standard quantum limit requires an accurate determination of the number of atoms. We present an accurate fluorescence detection technique for atoms that is fully integrated into an experimental apparatus for the production of many-particle entangled quantum states. Single-particle resolving fluorescence measurements for $1$ up to $30$ atoms are presented. According to our noise analysis, we extrapolate that the single-atom resolution extends to a limiting atom number of $390(20)$ atoms. We utilize the accurate atom number detection for a number stabilization of the laser-cooled atomic ensemble. For a target ensemble size of $7$ atoms prepared on demand, we achieve a $92(2)\,\%$ preparation fidelity and reach number fluctuations $18(1)\,\mathrm{dB}$ below the shot noise level using real-time feedback on the magneto-optical trap.

arXiv:1912.05689•Dec 11, 2019•1 citation

Number-resolved preparation of mesoscopic atomic ensembles

Andreas Hüper, Cebrail Pür, M Hetzel +7 more

Abstract The analysis of entangled atomic ensembles and their application for interferometry beyond the standard quantum limit requires an accurate determination of the number of atoms. We present an accurate fluorescence detection technique for atoms that is fully integrated into an experimental apparatus for the production of many-particle entangled quantum states. Number-resolved fluorescence measurements with single-atom accuracy for 1 up to 30 atoms are presented. According to our noise analysis, we extrapolate that the single-atom accuracy extends to a limiting atom number of 390(20) atoms. We utilize the accurate atom number detection for a number stabilization of the laser-cooled atomic ensemble. For a target ensemble size of 7 atoms prepared on demand, we achieve a 92(2)% preparation fidelity and reach number fluctuations 18(1) dB below the shot noise level using real-time feedback on the magneto-optical trap.

New Journal of Physics•Dec 3, 2020•9 citations

Entanglement For Atom Interferometers

Alexander Idel

Quantum Sensors, like atom interferometers (AI), can be employed for high-precision measurements of inertial forces, including their application as gravimeters, gradiometers, accelerometers, and gyroscopes. Their measurement principle relies on ultracold atoms that are prepared in quantum-mechanical superposition states in external degrees of freedom. These states can be prepared by a momentum transfer of a Raman laser. Then the superposition state senses the effect of an inertial force, which induce a corresponding relative phase. The phase is read out by a final coupling which converts the interferometric phase into a atom number difference between the two states. The difference provides an estimate of the interferometric phase and the corresponding quantity of interest. The quantum mechanical noise of the atomic ensemble cause a fundamental uncertainty of this estimation, which I analyze for generic AIs. For small atomic densities, the quantum phase noise of the ensemble limits the interferometric sensitivity. For large densities, quantum number fluctuations generate density fluctuations, which generates phase noise. I show that these two competing effects result in an optimal atom number with a maximal interferometer resolution. Squeezed atomic samples allow for a reduction of the quantum noise of one quantity at the expense of an increased noise along of a conjugate quantity. Phase and number are such quantities which obey to a variant of Heisenberg’s uncertainty principle. Neither phase nor number squeezing can improve the maximal interferometer resolution. As one main result of this thesis, I show how an optimal squeezing in between number and phase squeezing, allows for a fundamental improvement. I evaluate possible experimental paths to implement the proposed protocol. Concepts for a squeezing-enhanced operation of external-degree AIs have not yet been demonstrated. I propose and implement an atomic gravimeter, which is designed to accept spin-squeezed atomic states as input states. The interferometer is designed such that the interferometer couplings are performed in spin space, while the phase accumulation is performed in momentum states. For this interferometer, the squeezed input can be directly obtained from spin dynamics in spinor Bose-Einstein condensates. The main noise contributions in the experiment are analyzed, which results in a factor of 84 above the relevant quantum limit, preventing a squeezing enhancement so far. I outline a suppression of the main noise source, uncontrolled AC Stark shift on the squeezed mode and propose future important applications, including test of spontaneous collapse theories and an improvement of large-scale, high-precision gradiometers.

•Jan 1, 2021•0 citations

Entanglement-Enhanced Atomic Gravimeter

Christophe Cassens, Bernd Meyer-Hoppe, Ernst Maria Rasel +1 more

Interferometers based on ultracold atoms enable an absolute measurement of inertial forces with unprecedented precision. However, their resolution is fundamentally restricted by quantum fluctuations. Improved resolutions with entangled or squeezed atoms were demonstrated in internal-state measurements for thermal and quantum-degenerate atoms and, recently, for momentum-state interferometers with laser-cooled atoms. Here, we present a gravimeter based on Bose-Einstein condensates with a sensitivity of − 1.7 − 0.5 + 0.4 dB beyond the standard quantum limit. Interferometry with Bose-Einstein condensates combined with delta-kick collimation minimizes atom loss in and improves scalability of the interferometer to very-long-baseline atom interferometers.

arXiv:2404.18668•Physical Review X•Feb 11, 2025•30 citations

Atom Interferometry and Inertial Sensors

Philippe Bouyer

Atomic quantum sensors are a major breakthrough in the technology of time and frequency standards as well as ultra-precise sensing and monitoring of accelerations and rotations. They apply a new kind of optics based on matter waves. Today, atomic clocks are the standard for time and frequency measurement at the highest precisions. Inertial and rotational sensors using atom interferometers have already shown similar potential for replacing state-of-the-art sensors in other fields. With Bose-Einstein condensates, also refered as atom lasers, the traditional experiments with atom interferometers can be greatly improved. Testing of fundamental principles, studies of atomic properties, applications as inertial sensors, and measurements of fundamental constants can benefit from the brightness (intensity and small momentum spread) of these coherent sources. In addition, the coherence properties of condensates may also allow BEC based atom interferometers to approach the Heisenberg detection limit. This corresponds to a measurement precision which scales like 1/N for N atoms and not like 1 / N as for independent measurements on N atoms.

Frontiers in Optics•Jan 1, 2007•0 citations
Atom interferometers belong among today's most precise sensors and offer a broad range of possible metrological applications. Given their ability to measure accelerations and rotations precisely, they are suitable for inertial sensing, navigation and geodesy. Beyond this, they proved indispensible for time-keeping as well as fundamental research. This explains why the improvement of achievable sensitivities of atom interferometers is of particular interest. However the sensitivity of atom interferometers is fundamentally restricted by the standard quantum limit. The standard quantum limit can only be surpassed by employing entangled many-partice states. Entangled states, such as the twin-Fock state, allow atom interferometers to improve the phase sensitivity beyond the standard quantum limit, but they are reliant on an accurate detection of the interferometric out come. In this work, an experimental apparatus is designed and set up that will allow for routine generation of highly entangled twin-Fock states in a Rubidium-87 spinor Bose-Einstein condensate. As the main feature of this apparatus, an accurate atom counting fluorescence detection has been implemented. This detection achieves single-particle resolving fluorescence measurements for 1 up to 30 atoms. According to the noise analysis the single-atom resolution extends to a limiting atom number of 390(20) atoms. The implemented quadrupole coils with their strong gradient of up to 300 G/cm offer a tight confinement that in combination with the 55 W optical dipole trap laser will enable a fast repetition rate of the creation of highly entangled quantum states.
Atom interferometers are among the most sensitive tools in quantum metrology but are typically limited by the standard quantum limit (SQL). Entangled input states can surpass this bound and approach Heisenberg scaling. We present a metrology-ready 87Rb platform that combines sub-500 ms Bose-Einstein condensate (BEC) production in time-averaged optical potentials with state-resolved, single-atom-resolved detection. We create high-fidelity Twin-Fock states via spin-changing collisions and observe Hong-Ou-Mandel-type atomic interference of up to 10 atoms. Using these states' near-perfect number correlations for heralding, interferometry can be perfomed with large Dicke states for sub-SQL metrology at total atom numbers of 1000 and beyond.
The analysis of entangled atomic ensembles and their application for interferometry beyond the standard quantum limit requires an accurate determination of the number of atoms. We present an accurate fluorescence detection technique for atoms that is fully integrated into an experimental apparatus for the production of many-particle entangled quantum states. Single-particle resolving fluorescence measurements for 111 up to 303030 atoms are presented. According to our noise analysis, we extrapolate that the single-atom resolution extends to a limiting atom number of 390(20)390(20)390(20) atoms. We utilize the accurate atom number detection for a number stabilization of the laser-cooled atomic ensemble. For a target ensemble size of 777 atoms prepared on demand, we achieve a 92(2) %92(2)\,\%92(2)% preparation fidelity and reach number fluctuations 18(1) dB18(1)\,\mathrm{dB}18(1)dB below the shot noise level using real-time feedback on the magneto-optical trap.
Abstract The analysis of entangled atomic ensembles and their application for interferometry beyond the standard quantum limit requires an accurate determination of the number of atoms. We present an accurate fluorescence detection technique for atoms that is fully integrated into an experimental apparatus for the production of many-particle entangled quantum states. Number-resolved fluorescence measurements with single-atom accuracy for 1 up to 30 atoms are presented. According to our noise analysis, we extrapolate that the single-atom accuracy extends to a limiting atom number of 390(20) atoms. We utilize the accurate atom number detection for a number stabilization of the laser-cooled atomic ensemble. For a target ensemble size of 7 atoms prepared on demand, we achieve a 92(2)% preparation fidelity and reach number fluctuations 18(1) dB below the shot noise level using real-time feedback on the magneto-optical trap.
Quantum Sensors, like atom interferometers (AI), can be employed for high-precision measurements of inertial forces, including their application as gravimeters, gradiometers, accelerometers, and gyroscopes. Their measurement principle relies on ultracold atoms that are prepared in quantum-mechanical superposition states in external degrees of freedom. These states can be prepared by a momentum transfer of a Raman laser. Then the superposition state senses the effect of an inertial force, which induce a corresponding relative phase. The phase is read out by a final coupling which converts the interferometric phase into a atom number difference between the two states. The difference provides an estimate of the interferometric phase and the corresponding quantity of interest. The quantum mechanical noise of the atomic ensemble cause a fundamental uncertainty of this estimation, which I analyze for generic AIs. For small atomic densities, the quantum phase noise of the ensemble limits the interferometric sensitivity. For large densities, quantum number fluctuations generate density fluctuations, which generates phase noise. I show that these two competing effects result in an optimal atom number with a maximal interferometer resolution. Squeezed atomic samples allow for a reduction of the quantum noise of one quantity at the expense of an increased noise along of a conjugate quantity. Phase and number are such quantities which obey to a variant of Heisenberg’s uncertainty principle. Neither phase nor number squeezing can improve the maximal interferometer resolution. As one main result of this thesis, I show how an optimal squeezing in between number and phase squeezing, allows for a fundamental improvement. I evaluate possible experimental paths to implement the proposed protocol. Concepts for a squeezing-enhanced operation of external-degree AIs have not yet been demonstrated. I propose and implement an atomic gravimeter, which is designed to accept spin-squeezed atomic states as input states. The interferometer is designed such that the interferometer couplings are performed in spin space, while the phase accumulation is performed in momentum states. For this interferometer, the squeezed input can be directly obtained from spin dynamics in spinor Bose-Einstein condensates. The main noise contributions in the experiment are analyzed, which results in a factor of 84 above the relevant quantum limit, preventing a squeezing enhancement so far. I outline a suppression of the main noise source, uncontrolled AC Stark shift on the squeezed mode and propose future important applications, including test of spontaneous collapse theories and an improvement of large-scale, high-precision gradiometers.
Interferometers based on ultracold atoms enable an absolute measurement of inertial forces with unprecedented precision. However, their resolution is fundamentally restricted by quantum fluctuations. Improved resolutions with entangled or squeezed atoms were demonstrated in internal-state measurements for thermal and quantum-degenerate atoms and, recently, for momentum-state interferometers with laser-cooled atoms. Here, we present a gravimeter based on Bose-Einstein condensates with a sensitivity of − 1.7 − 0.5 + 0.4 dB beyond the standard quantum limit. Interferometry with Bose-Einstein condensates combined with delta-kick collimation minimizes atom loss in and improves scalability of the interferometer to very-long-baseline atom interferometers.
Atomic quantum sensors are a major breakthrough in the technology of time and frequency standards as well as ultra-precise sensing and monitoring of accelerations and rotations. They apply a new kind of optics based on matter waves. Today, atomic clocks are the standard for time and frequency measurement at the highest precisions. Inertial and rotational sensors using atom interferometers have already shown similar potential for replacing state-of-the-art sensors in other fields. With Bose-Einstein condensates, also refered as atom lasers, the traditional experiments with atom interferometers can be greatly improved. Testing of fundamental principles, studies of atomic properties, applications as inertial sensors, and measurements of fundamental constants can benefit from the brightness (intensity and small momentum spread) of these coherent sources. In addition, the coherence properties of condensates may also allow BEC based atom interferometers to approach the Heisenberg detection limit. This corresponds to a measurement precision which scales like 1/N for N atoms and not like 1 / N as for independent measurements on N atoms.