Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Distributed Sensor Networks

Cooperative secure transmission against collusive eavesdroppers in Internet of Things

Xin Fan, Yan Huo

Published Jun 1, 2020• 9 citations
Publisher

Abstract

As Internet of Things (IoT) has boomed in recent years, many security issues have also been exposed. Focusing on physical layer security in wireless Internet of Things network communication, a series of security methods have been widely studied. Nevertheless, cooperative jamming methods in physical layer security to fight against collusive eavesdroppers have not been thoroughly studied yet. In this article, we study a cooperative-jamming-based physical layer secure transmission scheme for Internet of Things wireless networks in the presence of collusive eavesdroppers. We design a cooperative jamming strategy without knowing the channel state information of eavesdroppers. Considering the cooperation of multiple nodes with multiple antennas, this strategy can maximize the signal-to-interference-plus-noise ratio at an actuator (legitimate receiver). Meanwhile, the generated cooperative jamming signals can reduce the signal-to-interference-plus-noise ratio at eavesdroppers. To explore the theoretical security performance of our strategy, we perform a secrecy outage probability analysis and an asymptotic analysis. In the cases of cooperative jamming and without cooperative jamming, the closed-form expressions of the secrecy outage probability are deduced, and the influence of system parameters on the secrecy outage probability becomes more intuitive through a strict mathematical asymptotic behavior analysis. In addition, considering the energy limitation of Internet of Things devices, we propose a power allocation algorithm to minimize the total transmission power given the security requirements. The numerical results show the effectiveness of our schemes and are consistent with the theoretical analysis.

DOI
10.1177/1550147720933464

Related papers

Security Analysis of Cooperative Jamming in Internet of Things with Multiple Eavesdroppers

Xin Fan, Yan Huo

With the great-leap-forward development of Internet of Things (IoT), it is extremely important to study secure wireless transmission for IoT systems. A cooperative jamming (CJ) strategy has been extensively studied to enhance physical layer security in IoT systems. However, CJ's secrecy performance has not been well studied in the scenario of collusive eavesdroppers. In this paper, we propose a CJ scheme for IoT systems to fight against multiple passive and collusive eavesdroppers of unknown channel state information. Considering nodes with multi-antenna in an IoT system, we design beamforming vectors to maximize signal-to- interference-plus-noise ratio (SINR) of the wireless link from a controller (transmitter) to an actuator (receiver). Under the worst-case assumption that eavesdroppers can aggregate all signals to enhance their eavesdropping abilities, we derive the closed- form expressions of the secrecy outage probability (SOP) with and without CJ. In addition, we employ a strict mathematical asymptotic analysis to provide insights into the effects of various system parameters on the SOP. Numerical results verify that the CJ scheme can effectively prevent eavesdropping and the effects of system parameters on SOP is consistent with theoretical analytical results.

Globecom•Dec 1, 2019•8 citations

Cooperative Jamming for Physical Layer Security Enhancement in Internet of Things

Lin Hu, Hong Wen, Bin Wu +5 more

Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.

IEEE Internet of Things Journal•Nov 28, 2017•248 citations

A Cooperative Jamming Scheme for Physical Layer Security enhancement in Multihop IoT Networks with Colluding Eavesdroppers

Zaid Abdullah, Gaojie Chen, Jonathon A. Chambers

An aim of Internet-of-Things (IoT) networks is to enable smart cities by connecting billions of devices for various applications. Such a massive connectivity can face many vital challenges, one of which is security. Accordingly, we propose a Cooperative Jamming (CJ) scheme for multihop IoT networks, where each transmitted symbol is protected by two hybrid-duplex jamming nodes from randomly located colluding eavesdroppers. Our proposed scheme provides a significant performance enhancement compared to a conventional Single Jamming (SJ) approach, at no additional power cost. In particular, to achieve a secrecy outage probability of 10−1, and assuming the number of hops is 8, the proposed CJ scheme outperforms the SJ case by 3.5 dB of jamming Signal-to-Noise Ratio (SNR). Integral closed-form expressions are derived for the secrecy outage probability and verified via Monte Carlo simulations.

IEEE Statistical Signal Processing Workshop (SSP)•Jul 11, 2021•1 citation

Cooperative-Jamming-Aided Secrecy Enhancement in Wireless Networks With Passive Eavesdroppers

Lin Hu, Hong Wen, Bin Wu +3 more

This paper investigates cooperative security in wireless networks, where a source (Alice) intends to transmit a confidential message to a legitimate destination (Bob), with the help of a cooperative jammer (Charlie), coexisting with multiple passive eavesdroppers (Eves). In particular, by assuming knowledge of Bob's perfect channel state information (CSI) but only Eves’ statistical CSIs, secrecy beamforming with artificial noise (AN) is utilized for secure transmission, and cooperative jamming (CJ) is explored to further enhance secrecy. We first derive an accurate closed-form expression for the secrecy outage probability (SOP), and establish the condition under which positive secrecy rate is achievable. Then, we provide a secure transmit design for maximizing the SOP constrained secrecy rate. Moreover, based on a strict mathematical analysis, we characterize the impact of the main channel quality and the number of Eves on transmit design and secrecy performance. Specifically, optimal power allocation ratio between the information-bearing signal and the AN signal increases as the main channel quality improves, and decreases with the number of Eves. Numerical results confirm that our design achieves performance improvement in terms of both secrecy rate and secure energy efficiency, as compared to the approach without CJ.

IEEE Transactions on Vehicular Technology•Aug 25, 2017•78 citations

Cooperation Based on Decode-and-Forward Plus Cooperative Jamming for Wireless Physical Layer Security

Shuanglin Huang, Jianjun Tan, Run Jiang

We employed node cooperation in a cooperative wireless network to achieve physical layer- based security. The case of a source-destination pair that works with the assistance of multiple cooperating nodes in the presence of an eavesdropper was considered in this study to improve the performance of secure wireless communications. A novel cooperative scheme, called the decode-and-forward plus cooperative jamming (DFCJ), was proposed. In this scheme, relay nodes transmit a weighted version of the source signals plus a common weighted jamming signal to confound the eavesdropper. The novel system design was proposed to determine cooperative node weights and transmit power allocation. In DFCJ, a closed-form solution is obtained to minimize the total transmit power that is subjected to a secrecy rate constraint under complete nulling of jamming signals at the destination. The results of the numerical evaluation of the transmit power and the obtained secrecy rate show that the proposed scheme can significantly improve the performance of wireless physical layer security compared with the original decode-and-forward scheme.

Journal of Digital Information Management•Apr 1, 2015•2 citations

Enhancing Secrecy Performance of Cooperative NOMA-Based IoT Networks via Multiantenna-Aided Artificial Noise

Rukhsana Ruby, Quoc‐Viet Pham, Kaishun Wu +3 more

With the increasing demand for security in many sectors, such as defense and health systems, developing secure Internet of Things (IoT) networks is a matter of great urgency. Looking at a potential solution for secure IoT systems, we investigate the physical layer security of cooperative nonorthogonal multiple access (NOMA) systems. After decoding information signal, the idea that a strong IoT node can serve as a relay node for other weak IoT nodes in enhancing their signal reception reliability, is known as cooperative NOMA. We consider both single-antenna and multiantenna aided transmission scenarios, where the base station (BS) communicates with two IoT nodes of different strengths. In the multiantenna scenario, artificial noise (AN) is generated at the BS and the strong IoT node for improving the security of the system. In order to characterize the secrecy performance, we derive new exact expressions of the security outage probability for both the IoT nodes under both the single-antenna and multiantenna aided scenarios. For the single-antenna scenario, we show that the power optimization at the BS and the strong IoT node can enhance the secrecy performance to some extent. For this case, we further study the secrecy diversity order of the overall system, which is mainly determined by the IoT node with the worse channel condition. For the multiantenna scenario, we derive the asymptotic secrecy outage probability (SOP) when the number of antennas tends to infinity. Extensive simulations have been conducted to verify the accuracy and effectiveness of the proposed analytical derivations. The presented results verify that the security performance of the cooperative NOMA-based IoT network can be improved through an appropriate power control scheme and by generating AN at the BS and the strong IoT node. The simulation results further illustrate that the asymptotic SOP is close to the exact one.

IEEE Internet of Things Journal•Sep 3, 2021•39 citations
As Internet of Things (IoT) has boomed in recent years, many security issues have also been exposed. Focusing on physical layer security in wireless Internet of Things network communication, a series of security methods have been widely studied. Nevertheless, cooperative jamming methods in physical layer security to fight against collusive eavesdroppers have not been thoroughly studied yet. In this article, we study a cooperative-jamming-based physical layer secure transmission scheme for Internet of Things wireless networks in the presence of collusive eavesdroppers. We design a cooperative jamming strategy without knowing the channel state information of eavesdroppers. Considering the cooperation of multiple nodes with multiple antennas, this strategy can maximize the signal-to-interference-plus-noise ratio at an actuator (legitimate receiver). Meanwhile, the generated cooperative jamming signals can reduce the signal-to-interference-plus-noise ratio at eavesdroppers. To explore the theoretical security performance of our strategy, we perform a secrecy outage probability analysis and an asymptotic analysis. In the cases of cooperative jamming and without cooperative jamming, the closed-form expressions of the secrecy outage probability are deduced, and the influence of system parameters on the secrecy outage probability becomes more intuitive through a strict mathematical asymptotic behavior analysis. In addition, considering the energy limitation of Internet of Things devices, we propose a power allocation algorithm to minimize the total transmission power given the security requirements. The numerical results show the effectiveness of our schemes and are consistent with the theoretical analysis.
With the great-leap-forward development of Internet of Things (IoT), it is extremely important to study secure wireless transmission for IoT systems. A cooperative jamming (CJ) strategy has been extensively studied to enhance physical layer security in IoT systems. However, CJ's secrecy performance has not been well studied in the scenario of collusive eavesdroppers. In this paper, we propose a CJ scheme for IoT systems to fight against multiple passive and collusive eavesdroppers of unknown channel state information. Considering nodes with multi-antenna in an IoT system, we design beamforming vectors to maximize signal-to- interference-plus-noise ratio (SINR) of the wireless link from a controller (transmitter) to an actuator (receiver). Under the worst-case assumption that eavesdroppers can aggregate all signals to enhance their eavesdropping abilities, we derive the closed- form expressions of the secrecy outage probability (SOP) with and without CJ. In addition, we employ a strict mathematical asymptotic analysis to provide insights into the effects of various system parameters on the SOP. Numerical results verify that the CJ scheme can effectively prevent eavesdropping and the effects of system parameters on SOP is consistent with theoretical analytical results.
Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.
An aim of Internet-of-Things (IoT) networks is to enable smart cities by connecting billions of devices for various applications. Such a massive connectivity can face many vital challenges, one of which is security. Accordingly, we propose a Cooperative Jamming (CJ) scheme for multihop IoT networks, where each transmitted symbol is protected by two hybrid-duplex jamming nodes from randomly located colluding eavesdroppers. Our proposed scheme provides a significant performance enhancement compared to a conventional Single Jamming (SJ) approach, at no additional power cost. In particular, to achieve a secrecy outage probability of 10−1, and assuming the number of hops is 8, the proposed CJ scheme outperforms the SJ case by 3.5 dB of jamming Signal-to-Noise Ratio (SNR). Integral closed-form expressions are derived for the secrecy outage probability and verified via Monte Carlo simulations.
This paper investigates cooperative security in wireless networks, where a source (Alice) intends to transmit a confidential message to a legitimate destination (Bob), with the help of a cooperative jammer (Charlie), coexisting with multiple passive eavesdroppers (Eves). In particular, by assuming knowledge of Bob's perfect channel state information (CSI) but only Eves’ statistical CSIs, secrecy beamforming with artificial noise (AN) is utilized for secure transmission, and cooperative jamming (CJ) is explored to further enhance secrecy. We first derive an accurate closed-form expression for the secrecy outage probability (SOP), and establish the condition under which positive secrecy rate is achievable. Then, we provide a secure transmit design for maximizing the SOP constrained secrecy rate. Moreover, based on a strict mathematical analysis, we characterize the impact of the main channel quality and the number of Eves on transmit design and secrecy performance. Specifically, optimal power allocation ratio between the information-bearing signal and the AN signal increases as the main channel quality improves, and decreases with the number of Eves. Numerical results confirm that our design achieves performance improvement in terms of both secrecy rate and secure energy efficiency, as compared to the approach without CJ.
We employed node cooperation in a cooperative wireless network to achieve physical layer- based security. The case of a source-destination pair that works with the assistance of multiple cooperating nodes in the presence of an eavesdropper was considered in this study to improve the performance of secure wireless communications. A novel cooperative scheme, called the decode-and-forward plus cooperative jamming (DFCJ), was proposed. In this scheme, relay nodes transmit a weighted version of the source signals plus a common weighted jamming signal to confound the eavesdropper. The novel system design was proposed to determine cooperative node weights and transmit power allocation. In DFCJ, a closed-form solution is obtained to minimize the total transmit power that is subjected to a secrecy rate constraint under complete nulling of jamming signals at the destination. The results of the numerical evaluation of the transmit power and the obtained secrecy rate show that the proposed scheme can significantly improve the performance of wireless physical layer security compared with the original decode-and-forward scheme.
With the increasing demand for security in many sectors, such as defense and health systems, developing secure Internet of Things (IoT) networks is a matter of great urgency. Looking at a potential solution for secure IoT systems, we investigate the physical layer security of cooperative nonorthogonal multiple access (NOMA) systems. After decoding information signal, the idea that a strong IoT node can serve as a relay node for other weak IoT nodes in enhancing their signal reception reliability, is known as cooperative NOMA. We consider both single-antenna and multiantenna aided transmission scenarios, where the base station (BS) communicates with two IoT nodes of different strengths. In the multiantenna scenario, artificial noise (AN) is generated at the BS and the strong IoT node for improving the security of the system. In order to characterize the secrecy performance, we derive new exact expressions of the security outage probability for both the IoT nodes under both the single-antenna and multiantenna aided scenarios. For the single-antenna scenario, we show that the power optimization at the BS and the strong IoT node can enhance the secrecy performance to some extent. For this case, we further study the secrecy diversity order of the overall system, which is mainly determined by the IoT node with the worse channel condition. For the multiantenna scenario, we derive the asymptotic secrecy outage probability (SOP) when the number of antennas tends to infinity. Extensive simulations have been conducted to verify the accuracy and effectiveness of the proposed analytical derivations. The presented results verify that the security performance of the cooperative NOMA-based IoT network can be improved through an appropriate power control scheme and by generating AN at the BS and the strong IoT node. The simulation results further illustrate that the asymptotic SOP is close to the exact one.