A 3D Polymeric Platform for Photonic Quantum Technologies
Maja Colautti, Pietro Lombardi, Marco Trapuzzano, Francesco S. Piccioli, Sofia Pazzagli, Bruno Tiribilli, Sara Nocentini, F. S. Cataliotti, Diederik Sybolt Wiersma, Costanza Toninelli
Abstract The successful development of future photonic quantum technologies will much depend on the possibility of realizing robust and scalable nanophotonic devices. These should include quantum emitters like on‐demand single‐photon sources and non‐linear elements, provided their transition linewidth is broadened only by spontaneous emission. However, conventional strategies to on‐chip integration, based on lithographic processes in semiconductors, are typically detrimental to the coherence properties of the emitter. Moreover, such approaches are difficult to scale and bear limitations in terms of geometries. Here an alternative platform is discussed, based on molecules that preserve near‐Fourier‐limited fluorescence even when embedded in polymeric photonic structures. 3D patterns are achieved via direct laser writing around selected molecular emitters, with a fast, inexpensive, and scalable fabrication process. By using an integrated polymeric design, detected photon counts of about 2.4 Mcps from a single cold molecule are reported. The proposed technology will allow for competitive organic quantum devices, including integrated multi‐photon interferometers, arrays of indistinguishable single‐photon sources, and hybrid electro‐optical nanophotonic chips.
Abstract The successful development of future photonic quantum technologies will much depend on the possibility of realizing robust and scalable nanophotonic devices. These should include quantum emitters like on‐demand single‐photon sources and non‐linear elements, provided their transition linewidth is broadened only by spontaneous emission. However, conventional strategies to on‐chip integration, based on lithographic processes in semiconductors, are typically detrimental to the coherence properties of the emitter. Moreover, such approaches are difficult to scale and bear limitations in terms of geometries. Here an alternative platform is discussed, based on molecules that preserve near‐Fourier‐limited fluorescence even when embedded in polymeric photonic structures. 3D patterns are achieved via direct laser writing around selected molecular emitters, with a fast, inexpensive, and scalable fabrication process. By using an integrated polymeric design, detected photon counts of about 2.4 Mcps from a single cold molecule are reported. The proposed technology will allow for competitive organic quantum devices, including integrated multi‐photon interferometers, arrays of indistinguishable single‐photon sources, and hybrid electro‐optical nanophotonic chips.
The successful development of future photonic quantum technologies heavily depends on the possibility of realizing robust, reliable and, crucially, scalable nanophotonic devices. In integrated networks, quantum emitters can be deployed as single-photon sources or non-linear optical elements, provided their transition linewidth is broadened only by spontaneous emission. However, conventional fabrication approaches are hardly scalable, typically detrimental for the emitter coherence properties and bear limitations in terms of geometries and materials. Here we introduce an alternative platform, based on molecules embedded in polymeric photonic structures. Three-dimensional patterns are achieved via direct laser writing around selected molecular emitters, which preserve near-Fourier-limited fluorescence. By using an integrated polymeric design, record-high photon fluxes from a single cold molecule are reported. The proposed technology allows to conceive a novel class of quantum devices, including integrated multi-photon interferometers, arrays of indistinguishable single photon sources and hybrid electro-optical nanophotonic devices.
Summary form only given. Efficient quantum light sources and non-linear optical elements at the few photon level are the basic ingredients for most applications in nano and quantum technologies. On the other hand, a scalable platform for quantum information and communication typically requires reliable light matter interfaces and on-chip integration. In this work we demonstrate the potential of a novel hybrid technology which combines single organic molecules as quantum emitters and dielectric chips, consisting of ridge waveguides and grating far-field couplers [1].Here the emitters are integrated by spin-coating onto the photonic chip. We demonstrate at room temperature the emission of single photons from DBT molecules into ridge waveguides with a branching ratio up to 40%. The overall single-photon source efficiency, including emission into the guided mode, propagation losses, and emission into a quasi-gaussian mode in free space, is estimated around 16%. These results are competitive with state-of-the-art single photon emission into propagating guided modes from solid state systems [4], while offering a novel platform with unprecedented versatility. Single waveguided photons can be readily processed on-chip or efficiently extracted into a quasi-gaussian mode in free space. We also discuss options to further improve the collection efficiency and applications to quantum optics [5] and to study manybody-induced quantum correlation effects [6].
Efficient quantum light sources and non-linear optical elements at the few photon level are the basic ingredients for most applications in nano and quantum technologies. On the other hand, a scalable platform for quantum ICT typically requires reliable light matter interfaces and on-chip integration. In this work we demonstrate the potential of a novel hybrid technology which combines single organic molecules as quantum emitters and dielectric chips [1]. Dibenzoterrylene molecules in anthracene crystals (DBT:Ac) are particularly suitable quantum systems for this task, since they exhibit long-term photostability in thin samples [2], easy fabrication methods and life-time limited emission at cryogenic temperatures [3]. We demonstrate at room temperature the emission of single photons from DBT molecules into ridge waveguides with a branching ratio up to 40%. The overall single-photon source efficiency, including emission into the guided mode, propagation losses, and emission into a quasi-gaussian mode in free space, is estimated around 16%. These results are competitive with state-of-the-art single photon emission into propagating guided modes from solid state systems [4], while offering a novel platform with unprecedented versatility. References [1] P. Lombardi et al., Arxiv: 1701.00459v1 (2017). [2] C. Toninelli et al., Opt. Express 18, 6577 (2010). [3] A. A. L. Nicolet et al., ChemPhysChem 8, 1929 (2007). [4] I. Zadeh et al., Nano Lett. 16, 2289 (2016); R. S. Daveau et al., Arxiv: 1610.08670v1 (2016). [5] J. Hwang et. al., New J. Phys. 13, 085009 (2011); H.-W. Lee et al., Phys. Rev. A 63, 012305 (2000).
ABSTRACT Integrated quantum photonics is rapidly emerging as a transformative platform for realizing scalable, chip‐based quantum technologies, from secure communication to advanced sensing and computing. At the heart of this revolution are solid‐state quantum emitters: atom‐like light sources embedded in a variety of host materials that enable single‐photon generation, quantum interference, and spin–photon coupling. We begin by discussing quantum emitters across bulk crystals, van der Waals materials, and chemically synthesized nanostructures, highlighting their performance trade‐offs and integration potential. We then examine nanophotonic cavities that enhance the light‐matter interaction, from photonic crystals to metasurfaces and Moiré resonators. Next, we discuss fabrication techniques with sub‐10 nm precision, including material‐specific etching strategies and hybrid integration schemes. Finally, we address emerging approaches for deterministic placement, cavity tuning, and on‐chip scalability. By bringing together insights from materials science, nanofabrication, and quantum optics, this Review provides a comprehensive perspective on the design and integration of high‐performance quantum emitters for scalable photonic platforms.
Summary form only given. A current challenge and trend in optical sciences is to extend the toolbox generated from experiments with single emitters and single photons towards interfacing photons with a well-defined number of quantum emitters. The resulting complex optical network would enable studies of many-body quantum optical phenomena and could lend itself to quantum simulations. However, common light-matter interfaces via strong focusing or cavity enhancement do not scale favourably. Therefore, achieving many-body coupling while preserving control of the individual quantum systems poses remarkable experimental challenges.Here, we present an inherently scalable platform, which relies on the evanescent coupling of single dye molecules to subwavelength TiO2waveguides (nanoguides) that are embedded in an organic matrix (Fig. 1a). At liquid helium temperatures, we observe lifetime-limited linewidths for these molecules distributed over an inhomogeneously broadened spectrum. However, by using integrated microelectrodes, we can Stark shift the resonances over a large bandwidth. The dopant concentration determines the optical density of our system which can reach up to a few hundred molecules per cubic wavelength. The highly confined mode of a nanoguide allows a substantial mode overlap with the emission pattern of a single emitter, resulting in coupling efficiencies of up to 32%. Therefore, we can observe coherent extinction signals from many different molecules in the transmission signal of a nanoguide; an example is shown by the blue curve in Fig. 1b [1]. The green and red curves in Fig. 1b demonstrate the nonlinear behaviour of a molecule when driven with a second narrow-band laser [1, 2]. We show that by modifying the spectral properties of the molecules either via external optical or static electric fields we control the optical response of a nanoguide. In addition to discussing subtleties of design and fabrication, we elaborate on future efforts towards the realization of on-chip polaritonic states [3] and the integration of further optical elements such as micoresonators [4].
The on-chip integration of quantum light sources and nonlinear elements constitutes a major step toward scalable photon-based quantum information processing and communication. In this work we demonstrate the potential of a hybrid technology that combines organic-molecule-based quantum emitters and dielectric chips consisting of ridge waveguides and grating far-field couplers. In particular, dibenzoterrylene molecules in thin anthracene crystals are used as single-photon sources, exhibiting long-term photostability, easy fabrication methods, almost unitary quantum yield, and lifetime-limited emission at cryogenic temperatures. We couple such single emitters to silicon nitride ridge waveguides, showing a coupling efficiency of up to 42 ± 2% over both propagation directions. Our results open a novel path toward a fully integrated and scalable photon-processing platform.