Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

A transportable optical lattice clock at the National Time Service Center*

Dehuan Kong, Zhi‐Hui Wang, Feng Guo, Qiang Zhang, Xiaotong Lu, Yebing Wang, Hong Chang

Published May 13, 2020• 20 citations
Publisher

Abstract

We report a transportable one-dimensional optical lattice clock based on 87Sr at the National Time Service Center. The transportable apparatus consists of a compact vacuum system and compact optical subsystems. The vacuum system with a size of 90 cm× 20 cm× 42 cm and the beam distributors are assembled on a double-layer optical breadboard. The modularized optical subsystems are integrated on independent optical breadboards. By using a 230 ms clock laser pulse, spin-polarized spectroscopy with a linewidth of 4.8 Hz is obtained which is close to the 3.9 Hz Fourier-limit linewidth. The time interleaved self-comparison frequency instability is determined to be 6.3 × 10–17 at an averaging time of 2000 s.

DOI
10.1088/1674-1056/ab9290

Related papers

Strontium optical lattice clock at the National Time Service Center

Yebing Wang, Mo-Juan Yin, Jie Ren +5 more

We report the 87 Sr optical lattice clock developed at the National Time Service Center. We achieved a closed-loop operation of the optical lattice clock based on 87 Sr atoms. The linewidth of the spin-polarized clock peak is 3.9 Hz with a clock laser pulse length of 300 ms, which corresponds to a Fourier-limited linewidth of 3 Hz. The fitting of the in-loop error signal data shows that the instability is approximately , affected primarily by the white noise. The fractional frequency difference averages down to for an averaging time of 3000 s.

Chinese Physics B•Feb 1, 2018•44 citations

A proof-of-concept model of compact and high-performance 87Sr optical lattice clock for space

Feng Guo, Wei Tan, Chihua Zhou +11 more

A compact and robust design of an optical lattice clock with high stability and accuracy is needed for the implementation of optical clocks operating on the space station. Here, we present the proof-of-concept model of a 87Sr optical lattice clock for space constructed at the National Time Service Center. The design is different from that of a laboratorial optical clock in that it focuses on the aspects of compactness and robustness, such as the modular design, compact components, low power consumption, and all-fiber links. The physics package is placed on an aluminum alloy rack with dimensions of 40 × 55 × 28 cm3. As far as we know, this is the most compact physics package of the Sr optical clock reported. The time interleaved self-comparison frequency instability is determined to be 2.6 × 10−15/τ.

AIP Advances•Dec 1, 2021•16 citations

Recent Advances Concerning the 87Sr Optical Lattice Clock at the National Time Service Center

Yebing Wang, Xiaotong Lu, Benquan Lu +2 more

We review recent experimental progress concerning the 87Sr optical lattice clock at the National Time Service Center in China. Hertz-level spectroscopy of the 87Sr clock transition for the optical lattice clock was performed, and closed-loop operation of the optical lattice clock was realized. A fractional frequency instability of 2.8 × 10−17 was attained for an averaging time of 2000 s. The Allan deviation is found to be 1.6 × 10−15/τ1/2 and is limited mainly by white-frequency-noise. The Landé g-factors of the (5s2)1S0 and (5s5p)3P0 states in 87Sr were measured experimentally; they are important for evaluating the clock’s Zeeman shifts. We also present recent work on the miniaturization of the strontium optical lattice clock for space applications.

Applied Sciences•Nov 8, 2018•13 citations

A transportable optical lattice clock using 171Yb

Gregor Mura, Tobias Franzen, C. Abou-Jaoudeh +5 more

We present first results on the spectroscopy of the1S0→3P0transition at 578nm in a transportable171Yb optical lattice clock. With the Yb atoms confined in a one-dimensional optical lattice, we have observed linewidths below 200 Hz, limited by saturation broadening. Currently the system is being upgraded towards full clock operation and use of more compact and robust subsystems.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2013•7 citations

Experimental setup of NTSC SrII optical lattice clock

Feng 峰 Guo 郭, Jia-An 家安 Li 李, Yan-Yan 艳艳 Liu 刘 +2 more

Abstract We report the SrII optical lattice clock at the National Time Service Center (NTSC). In this system, a blackbody radiation shield with movable lattice mitigates blackbody radiation shifts through active temperature control. A shallow optical lattice with minimal tunneling minimizes AC Stark shifts. Phase-locked counter-propagating lattice beams and conductive vacuum viewports further reduce systematic uncertainties and a novel initial-state preparation method simplifies the system. Clock transition spectra achieve a linewidth of 2.5 Hz with a 400 ms clock pulse, and self-comparison stability reaches 5.1 × 10 −16 at 1 s. These advancements give this clock the potential to be a critical platform for realizing outstanding systematic uncertainties in the future.

Chinese Physics B•Jul 8, 2025•0 citations

A transportable strontium optical lattice clock towards space

Lyndsie Smith

This work presents the realisation and characterisation of the world’s smallest transportable optical lattice clock as part of the Space Optical Clocks 2 EU project built at the University of Birmingham. Housed in a transportable rack of dimensions 170 x 100 x 60 cm, such a device aims to measure the frequency of the doubly-forbidden 1S0−3P0 clock transition in 88Sr in an unprecedented compact apparatus as a major technological milestone towards an optical clock upon the International Space Station. A master optical clock in space would serve with unrivalled accuracy and stability to disseminate a precise and accurate reference for terrestrial clocks and the coordination of international time. Such a clock has the potential to redefine the second, revolutionise timekeeping and precision measurements, and perform fundamental science experiments in space. \nUsing a combination of novel design, innovative cooling techniques, and robust, compact commercially available products, the clock portability, robustness and operational simplicity have been improved. The apparatus simply and effectively cools and traps up to 105 88Sr atoms at a temperature of 1.3±0.2μK in an optical lattice with a lifetime of 0.52±0.01s within 400ms. The most recent preliminary clock spectroscopy measurement was 3.6 ± 0.2Hz. The instability of the clock has been measured at 8×10−17 after averaging for 300s with the goal instability being 5.8×10−17 within the same averaging time. These results show the experiment will lead transportable optical clock research and continue with the goal of being a master clock in space.

•Dec 1, 2016•4 citations
We report a transportable one-dimensional optical lattice clock based on 87Sr at the National Time Service Center. The transportable apparatus consists of a compact vacuum system and compact optical subsystems. The vacuum system with a size of 90 cm× 20 cm× 42 cm and the beam distributors are assembled on a double-layer optical breadboard. The modularized optical subsystems are integrated on independent optical breadboards. By using a 230 ms clock laser pulse, spin-polarized spectroscopy with a linewidth of 4.8 Hz is obtained which is close to the 3.9 Hz Fourier-limit linewidth. The time interleaved self-comparison frequency instability is determined to be 6.3 × 10–17 at an averaging time of 2000 s.
We report the 87 Sr optical lattice clock developed at the National Time Service Center. We achieved a closed-loop operation of the optical lattice clock based on 87 Sr atoms. The linewidth of the spin-polarized clock peak is 3.9 Hz with a clock laser pulse length of 300 ms, which corresponds to a Fourier-limited linewidth of 3 Hz. The fitting of the in-loop error signal data shows that the instability is approximately , affected primarily by the white noise. The fractional frequency difference averages down to for an averaging time of 3000 s.
A compact and robust design of an optical lattice clock with high stability and accuracy is needed for the implementation of optical clocks operating on the space station. Here, we present the proof-of-concept model of a 87Sr optical lattice clock for space constructed at the National Time Service Center. The design is different from that of a laboratorial optical clock in that it focuses on the aspects of compactness and robustness, such as the modular design, compact components, low power consumption, and all-fiber links. The physics package is placed on an aluminum alloy rack with dimensions of 40 × 55 × 28 cm3. As far as we know, this is the most compact physics package of the Sr optical clock reported. The time interleaved self-comparison frequency instability is determined to be 2.6 × 10−15/τ.
We review recent experimental progress concerning the 87Sr optical lattice clock at the National Time Service Center in China. Hertz-level spectroscopy of the 87Sr clock transition for the optical lattice clock was performed, and closed-loop operation of the optical lattice clock was realized. A fractional frequency instability of 2.8 × 10−17 was attained for an averaging time of 2000 s. The Allan deviation is found to be 1.6 × 10−15/τ1/2 and is limited mainly by white-frequency-noise. The Landé g-factors of the (5s2)1S0 and (5s5p)3P0 states in 87Sr were measured experimentally; they are important for evaluating the clock’s Zeeman shifts. We also present recent work on the miniaturization of the strontium optical lattice clock for space applications.
Abstract We report the SrII optical lattice clock at the National Time Service Center (NTSC). In this system, a blackbody radiation shield with movable lattice mitigates blackbody radiation shifts through active temperature control. A shallow optical lattice with minimal tunneling minimizes AC Stark shifts. Phase-locked counter-propagating lattice beams and conductive vacuum viewports further reduce systematic uncertainties and a novel initial-state preparation method simplifies the system. Clock transition spectra achieve a linewidth of 2.5 Hz with a 400 ms clock pulse, and self-comparison stability reaches 5.1 × 10 −16 at 1 s. These advancements give this clock the potential to be a critical platform for realizing outstanding systematic uncertainties in the future.
This work presents the realisation and characterisation of the world’s smallest transportable optical lattice clock as part of the Space Optical Clocks 2 EU project built at the University of Birmingham. Housed in a transportable rack of dimensions 170 x 100 x 60 cm, such a device aims to measure the frequency of the doubly-forbidden 1S0−3P0 clock transition in 88Sr in an unprecedented compact apparatus as a major technological milestone towards an optical clock upon the International Space Station. A master optical clock in space would serve with unrivalled accuracy and stability to disseminate a precise and accurate reference for terrestrial clocks and the coordination of international time. Such a clock has the potential to redefine the second, revolutionise timekeeping and precision measurements, and perform fundamental science experiments in space. \nUsing a combination of novel design, innovative cooling techniques, and robust, compact commercially available products, the clock portability, robustness and operational simplicity have been improved. The apparatus simply and effectively cools and traps up to 105 88Sr atoms at a temperature of 1.3±0.2μK in an optical lattice with a lifetime of 0.52±0.01s within 400ms. The most recent preliminary clock spectroscopy measurement was 3.6 ± 0.2Hz. The instability of the clock has been measured at 8×10−17 after averaging for 300s with the goal instability being 5.8×10−17 within the same averaging time. These results show the experiment will lead transportable optical clock research and continue with the goal of being a master clock in space.