Direct UV-written silica-on-silicon provides an attractive platform for quantum optics, offering the key benefits of low propagation losses and excellent optical fibre compatibility. This work has aimed to develop the necessary techniques and components for completely integrated quantum optics experiments to be carried out using this platform, on a larger scale than previously possible. Arrays of matched on-chip photon sources based on birefringence-matched spontaneous four-wave mixing (FWM) are demonstrated, both at 800 nm and in the telecommunications C-band, along with progress towards further integration of these sources. Thermo-optic phase shifters, for use in room temperature quantum circuits, have been optimised via modelling, and a range of alternative modulator technologies have been explored. Further work has been concerned with the development of a modular system for quantum optics, comprising a set of duplicate reconfigurable modules and the necessary drive electronics and software, with the intent of simplifying the task of identifying and quantifying manufacturing imperfections in large integrated experiments. Efforts have also been made to improve the detection efficiency of on-chip transition edge sensor (TES) single photon detectors, including the use of longer absorbers and high reflectors for multiple absorption passes; this has resulted in the demonstration of a photon-number-resolving detector with a Bragg grating enhanced quantum efficiency of 87%. Approaches for further increasing the detection efficiency are considered and a device for on-chip Hong-Ou-Mandel and photon subtraction experiments using these detectors is reported.
Direct UV-written silica-on-silicon provides an attractive platform for quantum optics, offering the key benefits of low propagation losses and excellent optical fibre compatibility. This work has aimed to develop the necessary techniques and components for completely integrated quantum optics experiments to be carried out using this platform, on a larger scale than previously possible. Arrays of matched on-chip photon sources based on birefringence-matched spontaneous four-wave mixing (FWM) are demonstrated, both at 800 nm and in the telecommunications C-band, along with progress towards further integration of these sources. Thermo-optic phase shifters, for use in room temperature quantum circuits, have been optimised via modelling, and a range of alternative modulator technologies have been explored. Further work has been concerned with the development of a modular system for quantum optics, comprising a set of duplicate reconfigurable modules and the necessary drive electronics and software, with the intent of simplifying the task of identifying and quantifying manufacturing imperfections in large integrated experiments. Efforts have also been made to improve the detection efficiency of on-chip transition edge sensor (TES) single photon detectors, including the use of longer absorbers and high reflectors for multiple absorption passes; this has resulted in the demonstration of a photon-number-resolving detector with a Bragg grating enhanced quantum efficiency of 87%. Approaches for further increasing the detection efficiency are considered and a device for on-chip Hong-Ou-Mandel and photon subtraction experiments using these detectors is reported.
For over a decade the field of quantum photonics has increasingly looked towards optical integrated platforms to perform more complex and sophisticated experiments. Silica integrated optics is an ideal material for this area, offering low propagation and fibre-coupling losses. To date many of the key on-chip experiments have been carried out in this platform, using bespoke monolithic devices. In this work we propose an alternative approach, implementing a linear network constructed from a number of identical reconfigurable modules. The modules are measured separately to produce an accurate model of the overall network. The cellular nature also allows the replacement of modules that are faulty or substandard. Each module comprises of an array of 10 Mach-Zhender interferometers. Forty thermo-optic phase shifters on each chip allows the control of both the amplitude and phase of the optical field within the devices. By cascading the modules any arbitrary NxN unitary network can be realised. The optical waveguides within the modules are fabricated by direct UV writing, where a scanning focused UV laser beam increases the local refractive index within a photosensitive germanosilicate glass layer. The resulting channel waveguides are engineered to have dimensions that are mode matched to standard optical fibre producing excellent coupling efficiency. Bragg gratings can also be simultaneously produced within the waveguides which greatly assists in the precise characterisation of the phase shifters, coupling ratios and optical losses within the modules. We will present our recent work in this area, demonstrating devices operating at telecom wavelengths for quantum information processing. We present a modular reconfigurable system for on-chip quantum optics experiments with excellent fibre compatibility and low propagation losses, implemented using direct-UV-written silica-on-silicon. The performance of fabricated devices in various configurations is reported.
The emerging field of quantum technologies requires a range of photonic devices, many with demanding specifications. The area of quantum information processing requires scaling in order to increase the complexity of experiments, this has led researchers towards integrated photonic platforms. The key property of these single photon devices is low-loss operation and as a consequence glass and silica devices have been a dominant platform. Whereas atom chip sensors require stable compact systems for converting optical fibre modes to free space beams for atom trapping. In this talk I will present the photonic engineering undertaken at the University of Southampton to fabricate devices for the quantum technology community. The key fabrication approach is a direct UV writing technique, where a UV laser beam is used to define waveguides, splitters/couplers, Bragg gratings and 2D tilted gratings. The fabricated devices include cascaded arrays of Mach-Zehnder interferometers to preform photon-photon interactions, single photon sources via spontaneous four-wave mixing, integrated superconducting single photon detectors and 2D diffraction gratings. In addition to the inscription method I will describe the fabrication of the substrates required for the UV writing process which are generated via Flame Hydrolysis Deposition. I will discuss our most recent work on single photon linear optical networks constructed from a number of identical reconfigurable modules. The modules are characterised separately to produce an accurate model of the network and the cellular approach permits the replacement of modules that are deficient. Each module comprises of an array of 10 Mach-Zehnder interferometers with 40 thermo-optic phase shifters on each chip that control both the amplitude and phase of the optical modes. By concatenating modules any arbitrary N ×N unitary network can be realised. The channel waveguides are engineered to be mode matched to standard optical fibre producing excellent coupling efficiency. I will present our recent work in this area and other photonic devices for the field of quantum technology.
All optical quantum information processing is an important developing field for understanding and exploiting quantum entanglement and offers opportunities in quantum computation, quantum sensing and quantum communication. The presentation will describe work on laser written devices in a silica on silicon platform. The devices can be used to create single photon sources, waveguide circuitry and number resolving detectors. Applications of the technology include boson sampling, quantum teleportation, on-chip number resolving detection and quantum simulation. The use of laser writing allows for rapid prototyping, and by including high quality Bragg gratings, it is possible to provide accurate measurements of device properties including losses and coupler variability. Furthermore, the ability to make accurate measurements of material properties such as dispersion and birefringence allows the creation of tailored devices with optimal properties for identical photon sources.
Quantum optics experiments are increasingly taking an integrated format for the benefits of phase stability and scalability. Silica has proved an advantageous material for this work due to its low propagation loss and high-efficiency coupling to optical fibre, and a number of key on-chip experiments have already been carried out with up to four photons using this material [1]. Fabrication imperfections create a number of difficulties in moving to more complex setups since the classical performance of the network must be characterised before an analysis of its quantum properties can be carried out, and this process becomes greatly more challenging as the circuit complexity grows.
This thesis presents the development of a platform to fabricate photonics integrated circuits that can be used to scale networks intended for quantum information processing (QIP) experiments. The stringent technical requirements for the transport and manipulation of quantum states of light are discussed with respect to channel waveguides and integrated gratings fabricated in silica-on-silicon through direct UV writing laser processing Tilted gratings are identified as a method to enable polarisation-based applications for this integrated platform. A novel implementation of in-line planar waveguide polarisers based on 45º tilted gratings is presented, demonstrating gratings with polarisation extinction ratio (PER) of 0.25 dB / mm and bandwidth impairments better than 0.3 dB in the C-band. 45º tilted gratings in UV written waveguides are used to create novel polarising coupler architectures with PER of 28.5 dB. The alteration of the material composition of germanesilicate planar core layers is investigated, producing waveguides with birefringence of 4.5 ± 0.2 × 10−4, higher than previously reported for this platform. A process for producing end facet endcaps to extend the platform’s capability for high power applications is also described. These developments offer potential for the scaling of QIP experiments with heralded spontaneous four-wave mixing single-photon sources. Finally, the thesis describes research-based education experiments conducted to inform a wide range of audiences on the importance of photonics technologies. The concept of Photonics, and the underlying science and associated research, has been introduced to 2,952 students from 81 schools in the South of England and over 6,000people in public events.
In the past decades quantum optics has been at the forefront of quantum innovative technologies. For practical applications, scalable platforms for implementation of quantum optical circuits are vital. This thesis presents two new platforms for scalable implementation of quantum optical circuits, namely, modular approach and monolithic integration. Here, we take the first steps towards the integration of three main elements of every quantum optics circuits: Single-photon emitters, single-photon detectors, and quantum logics. Until now, most quantum optical circuits used separate platforms for single-photon generation and detection. The main challenge in the integration of these technologies, which have different requirements, has slowed down the research in the field. Here, we integrate sources and detectors by first fabricating the devices on their own platform and then transferring and combining them together. Plasma enhanced chemical vapor deposition of silicon nitride followed by etching optical waveguides connect these elements. Removing the Poissonian optical excitation field from the quantum circuit is necessary for integration. Classical optical excitation can be avoided if the sources are electrically pumped. However, fabrication of high-quality electrically pumped sources, suitable for integration, has been limited. The experiments described in chapter 4 are our first step towards addressing the mentioned problem. Defect-free nanowires are grown on <100> direction and their optoelectronic performance are characterized. Nanowire quantum dots, thanks to their waveguiding, purity, coherence and their potentials for deterministic integration with other optical circuits, are promising single-photon sources for on-chip quantum optics. However, precise control of the emission energy of the quantum dots by growth has not become possible yet. Chapter 5 describes a method for on-chip tuning of emission energy of nanowire quantum dots using strain fields. We show the emission energy of independent nanowire quantum dots can be brought into degeneracy without affecting their single-photon emission properties. The quantum optical components have to be routed and connected together to form functional circuits. On a chip, this is usually carried out using optical waveguides. Moreover, manipulation of single photons has to be done in a scalable fashion. Again optical waveguides and ring resonators are very good candidates for this task. Therefore, understanding the behavior of these circuits such as their losses, polarization dependence, and temperature behavior is important. The experiment described in chapter 6 studies the behavior of plasma enhanced silicon nitride waveguides in cryogenic temperatures. We concluded in this chapter that due to weak thermo-optic sensitivity of silicon nitride at cryogenic temperatures, the available thermal budget on the system should be carefully considered. An important step in achieving a scalable platform for quantum optical circuits is deterministic and efficient integration of single-photon sources. In chapter 7, we demonstrate successful integration of III-V nanowire quantum dots with silicon nitride waveguides. The nanowires are deterministically selected and transferred from the original growth chip to the new substrate where they are integrated with low-loss silicon nitride waveguides. Our measurements show that the integrated sources preserve their high quality emission properties. In chapter 8, we describe an alternative approach: amodular method for scalable quantum optics. The proposed technique is based on coupling the single-photon from sources into optical fibers where the photons can be processed and then fed into the single-photon detectors. This approach has high flexibility and is easier to implement but as described in the chapter, at the moment, losses in the interfaces between optical fibers and single-photon sources are a major limiting factor. We conclude the thesis with some possible future directions and exciting new results on integration of single-photon detectors with sources and waveguides. Finally, primary results on on-chip single-photon filtering and removal of the optical excitation field are demonstrated.