In the past years, superconducting quantum computation has received much attention and significant progress of the device design and fabrication has been made, which leads qubit coherence times to be improved greatly. Recently, we have successfully designed, fabricated, and tested the superconducting qubits based on the negative-inductance superconducting quantum interference devices (nSQUIDs), which are expected to have the advantages for the fast quantum information transfer and macroscopic quantum phenomenon study with a two-dimensional potential landscape. Their quantum coherence and basic physical properties have been demonstrated and systematically investigated. On the other hand, a new type of superconducting qubit, called transmon and Xmon qubit, has been developed in the meantime by the international community, whose coherence time has been gradually increased to the present scale of tens of microseconds. These devices are demonstrated to have many advantages in the sample design and fabrication, and multi-qubit coupling and manipulation. We have also studied this type of superconducting qubit. In collaboration with Zhejiang University and the University of Science and Technology of China, we have successfully fabricated various types of the coupled Xmon devices having the qubit numbers ranging from 4 to 10. Quantum entanglement, quantum algorithm of solving coupled linear equations, and quantum simulation of the many-body localization problem in solid-state physics have been demonstrated by using these devices. Also, we have made significant achievements in the studies of the macroscopic quantum phenomena, quantum dissipation, quantum microwave lasing, and some other quantum optics problems. In particular, Autler-Townes splitting under strong microwave drive, electromagnetically induced transparency, stimulated Raman adiabatic passage, microwave mixing, correlated emission lasing, and microwave frequency up-and-down conversion have been successfully studied, both experimentally and theoretically.
In the past years, superconducting quantum computation has received much attention and significant progress of the device design and fabrication has been made, which leads qubit coherence times to be improved greatly. Recently, we have successfully designed, fabricated, and tested the superconducting qubits based on the negative-inductance superconducting quantum interference devices (nSQUIDs), which are expected to have the advantages for the fast quantum information transfer and macroscopic quantum phenomenon study with a two-dimensional potential landscape. Their quantum coherence and basic physical properties have been demonstrated and systematically investigated. On the other hand, a new type of superconducting qubit, called transmon and Xmon qubit, has been developed in the meantime by the international community, whose coherence time has been gradually increased to the present scale of tens of microseconds. These devices are demonstrated to have many advantages in the sample design and fabrication, and multi-qubit coupling and manipulation. We have also studied this type of superconducting qubit. In collaboration with Zhejiang University and the University of Science and Technology of China, we have successfully fabricated various types of the coupled Xmon devices having the qubit numbers ranging from 4 to 10. Quantum entanglement, quantum algorithm of solving coupled linear equations, and quantum simulation of the many-body localization problem in solid-state physics have been demonstrated by using these devices. Also, we have made significant achievements in the studies of the macroscopic quantum phenomena, quantum dissipation, quantum microwave lasing, and some other quantum optics problems. In particular, Autler-Townes splitting under strong microwave drive, electromagnetically induced transparency, stimulated Raman adiabatic passage, microwave mixing, correlated emission lasing, and microwave frequency up-and-down conversion have been successfully studied, both experimentally and theoretically.
Over the past two decades significant advances have been made in the research of superconducting quantum computing and quantum simulation, in particular of the device design and fabrication that leads to ever-increasing superconducting qubit coherence times and scales. With Google’s announcement of the realization of “quantum supremacy”, superconducting quantum computing has attracted even more attention. Superconducting qubits are macroscopic objects with quantum properties such as quantized energy levels and quantum-state superposition and entanglement. Their quantum states can be precisely manipulated by tuning the magnetic flux, charge, and phase difference of the Josephson junctions with nonlinear inductance through electromagnetic pulse signals, thereby implementing the quantum information processing. They have advantages in many aspects and are expected to become the central part of universal quantum computing. Superconducting qubits and auxiliary devices prepared with niobium or other hard metals like tantalum as bottom layers of large-area components have unique properties and potentials for further development. In this paper the research work in this area is briefly reviewed, starting from the design and working principle of a variety of superconducting qubits, to the detailed procedures of substrate selection and pretreatment, film growth, pattern transfer, etching, and Josephson junction fabrication, and finally the practical superconducting qubit and their auxiliary device fabrications with niobium base layers are also presented. We aim to provide a clear overview for the fabrication process of these superconducting devices as well as an outlook for further device improvement and optimization in order to help establish a perspective for future progress.
Superconducting quantum bits (qubits) and circuits are the leading candidate for the implementation of solid-state quantum computation. They have also been widely used in a variety of studies of quantum physics, atomic physics, quantum optics, and quantum simulation. In this article, we will present an overview of the basic principles of the superconducting qubits, including the phase, flux, charge, and transmon (Xmon) qubits, and the progress achieved so far concerning the improvements of the device design and quantum coherence property. Experimental studies in various research fields using the superconducting qubits and circuits will be briefly reviewed.
In a quantum computer, the information carriers, which are bits in ordinary computers, are implemented as devices that exhibit coherent superpositions of physical states and entanglement. Such components, known as quantum bits or qubits, can be realized with various different types of two-state quantum systems. Quantum computers will be built for computational speed, with hoped for applications especially in cryptography and in other tasks where classical computers remain inefficient. Circuit quantum electrodynamics (cQED) is a quantum-computer architecture which employs superconducting electronic components and microwave photon fields as building blocks. Compared to cavity quantum electrodynamics (CQED), where atoms are trapped in physical cavities, cQED is more attractive in that its qubits are tunable and conveniently integrable with the electronics already in use. This architecture has shown some of the most promising qubit designs, despite their coherence times reaching tens of microseconds, are still below the state of the art with spin qubits, which reach milliseconds. Coherence times are historically the most relevant parameters describing the fitness of a qubit, although these days not necessarily the limiting factor. This thesis presents a comprehensive set of theoretical and experimental methods for measuring the characteristic parameters of superconducting qubits. We especially study transmission-line-shunted plasma oscillation qubits, or transmons, and presents experimental results for a single sample. Transmon capacitively couples a superconducting quantum interference device (SQUID) with a coplanar waveguide (CPW) resonator, often with added frequency tunability utilizing an external magnet. The number of superconducting charge carriers tunnelled through a junction in the SQUID are used as qubit degrees of freedom. Readout of the qubit state is carried out by measuring transmission through the CPW. A cryogenic setup is employed with measurement and driving pulses delivered from microwave sources. Steady-state spectroscopy is employed to determine the resonance frequencies of the qubit and the resonator, qubit-resonator coupling constants, and the energy parameters of the qubit. Pulse-modulated measurements are employed to determine the coherence times of the qubit. The related analysis- and simulation programs and scripts are collected togithub.com/patomaki.
Abstract Two-junction SQUIDs with negative mutual inductance between their two arms, called nSQUIDs, have been proposed for significantly improving quantum information transfer but their quantum nature has not been experimentally demonstrated. We have designed, fabricated, and characterized superconducting nSQUID qubits. Our results provide clear evidence of the quantum coherence of the device, whose properties are well described by theoretical calculations using parameters determined from spectroscopic measurement. In addition to their future application for fast quantum information transfer, the nSQUID qubits exhibit rich characteristics in their tunable two-dimensional (2D) potentials, energy levels, wave function symmetries, and dipole matrix elements, which are essential to the study of a wide variety of macroscopic quantum phenomena such as tunneling in 2D potential landscapes.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.