aqora

Demonstration of convertor circuits between half-flux-quantum and single-flux-quantum logic

Yusuke Nakamura, Daiki Hasegawa, Yuto Takeshita +4 more

The Japan Society of Applied PhysicsJan 26, 20210 citations

A new optimization procedure for single flux quantum circuits

N Mori, A. Akahori, Tomoyuki Sato +3 more

Physica C SuperconductivityAug 1, 200154 citations

Energy efficient half-flux-quantum circuit aiming at milli-kelvin stage operation

Feng Li, Duong Pham, Yuto Takeshita +4 more

Abstract Half-flux-quantum (HFQ) circuits are based on 0–π superconducting quantum interference devices (SQUIDs) and is one of the energy-efficient superconductor digital circuits. The bit energy is determined by the critical current I cn of 0–π SQUID, which can be easily tuned with the loop inductance and junction critical current. In this work, an alternative π–π–π SQUID is adopted to demonstrate HFQ circuits to simplify the fabrication process and enhance circuit energy efficiency. The properties of superconductor/ferromagnet/insulator/superconductor Josephson junctions (π-JJs) are measured with temperature dependence from 4.2 K down to 10 mK. HFQ toggle flip-flops (TFFs) are successfully demonstrated at frequencies of up to 6.7 GHz and 44.5 GHz at temperatures of 4.2 K and 10 mK, respectively. Comparing the HFQ TFF with its rapid single-flux quantum counterpart under the same fabrication process, it is anticipated that the HFQ TFF will exhibit approximately 70% reduction in both static and dynamic energy dissipation. This research establishes the foundation for developing cryogenic interface control and readout circuits for large-scale quantum computing in the future.Abstract Half-flux-quantum (HFQ) circuits are based on 0–π superconducting quantum interference devices (SQUIDs) and is one of the energy-efficient superconductor digital circuits. The bit energy is determined by the critical current I cn of 0–π SQUID, which can be easily tuned with the loop inductance and junction critical current. In this work, an alternative π–π–π SQUID is adopted to demonstrate HFQ circuits to simplify the fabrication process and enhance circuit energy efficiency. The properties of superconductor/ferromagnet/insulator/superconductor Josephson junctions (π-JJs) are measured with temperature dependence from 4.2 K down to 10 mK. HFQ toggle flip-flops (TFFs) are successfully demonstrated at frequencies of up to 6.7 GHz and 44.5 GHz at temperatures of 4.2 K and 10 mK, respectively. Comparing the HFQ TFF with its rapid single-flux quantum counterpart under the same fabrication process, it is anticipated that the HFQ TFF will exhibit approximately 70% reduction in both static and dynamic energy dissipation. This research establishes the foundation for developing cryogenic interface control and readout circuits for large-scale quantum computing in the future.

Superconductor Science and TechnologyAug 16, 202312 citations

Recent Progress in Rapid-Single-Flux-Quantum Circuits

Akira Fujimaki, Takahiro Yamada, Masamitsu Tanaka +4 more

Advances in science and technologyOct 1, 20061 citation

Superconductive Logic Using 2ϕ—Josephson Junctions With Half Flux Quantum Pulses

Issa Salameh, Eby G. Friedman, Shahar Kvatinsky

Superconductive logic based on Josephson junctions (JJ) is a promising technology for energy efficient supercomputers and cloud computing. This technology can deliver significant improvements in performance and energy efficiency as compared to CMOS. Superconductive circuits, however, suffer from low density integration as compared to CMOS, primarily due to the limited scalability of the inductors. To improve the scalability of superconductive logic, a logic family based on a novel JJ technology,$2\phi $-JJ, has been proposed that eliminates the inductors. In this brief, three circuits are presented which exploit this scalable inductor-less technology. This novel$2\phi $-JJ technology represents the data as half flux quantum (HFQ) pulses, which improves the energy efficiency and speed as compared to standard superconductive logic such as rapid single flux quantum (RSFQ). Unlike RSFQ, the proposed circuits dynamically switch upon receiving an HFQ pulse, saving energy. These$2\phi $-JJ logic circuits operate 2.25X faster and require 2.6X less energy as compared to RSFQ.Superconductive logic based on Josephson junctions (JJ) is a promising technology for energy efficient supercomputers and cloud computing. This technology can deliver significant improvements in performance and energy efficiency as compared to CMOS. Superconductive circuits, however, suffer from low density integration as compared to CMOS, primarily due to the limited scalability of the inductors. To improve the scalability of superconductive logic, a logic family based on a novel JJ technology,$2\phi $-JJ, has been proposed that eliminates the inductors. In this brief, three circuits are presented which exploit this scalable inductor-less technology. This novel$2\phi $-JJ technology represents the data as half flux quantum (HFQ) pulses, which improves the energy efficiency and speed as compared to standard superconductive logic such as rapid single flux quantum (RSFQ). Unlike RSFQ, the proposed circuits dynamically switch upon receiving an HFQ pulse, saving energy. These$2\phi $-JJ logic circuits operate 2.25X faster and require 2.6X less energy as compared to RSFQ.

IEEE Transactions on Circuits & Systems II Express BriefsMar 28, 202214 citations

Design and evaluation of single flux quantum circuits using local flux bias

Shunta Asada, Yuki Yamanashi, Nobuyuki Yoshikawa

The Japan Society of Applied PhysicsJan 25, 20190 citations

Simulation and Comparison of the Energy Efficiency of Half Flux Quantum Circuits

Related papers

Simulation and Comparison of the Energy Efficiency of Half Flux Quantum Circuits

Related papers