Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Digital Readout and Control of a Superconducting Qubit

Caleb Howington

Published Jan 1, 2019• 0 citations
OpenAlex

Abstract

In the quest to build a fault-tolerant quantum computer, superconducting circuits based on Josephson junctions have emerged as a leading architecture. Coherence times have increased significantly over the last two decades, and processors with ∼ 50 qubits have been experimentally demonstrated. These systems traditionally utilize microwave frequency control signals, and heterodyne based detection schemes for measurement. Both of these techniques rely heavily on room temperature microwave generators, high-bandwidth lines from room temperature to millikelvin temperatures, and bulky non-reciprocal elements such as cryogenic microwave isolators. Reliance on these elements makes it impractical to scale existing devices up a single order of magnitude, let alone the 5-6 orders of magnitude needed for performing fault-tolerant quantum algorithms. Here, I present results that suggesting superconducting digital logic, namely Single Flux Quantum (SFQ) logic, can replace analog control and measurement techniques, avoiding the significant overhead involved. I describe a scheme for measuring qubits with a device known as a Josephson Photomultiplier (JPM), which crucially stores the result of a qubit measurement in a classical circulating supercurrent within the device and allows for integration with SFQ detection circuitry. This technique is experimentally demonstrated, with single-shot measurement fidelity of 92%. Two methods for accessing this measurement result are presented, one utilizing ballistic fluxons, and another utilizing flux comparison. Initial experimental results of the latter are presented. In addition, I describe a scheme for controlling qubits with sequences of digital SFQ pulses. This method is then used to control a qubit without a microwave signal generator, with results of an average single-qubit gate fidelity of around 95%. When combined, these techniques form a nearly fully digital interface to superconducting qubits, which could allow these systems to scale much more easily.

Related papers

Interfacing Superconducting Qubits With Cryogenic Logic: Readout

Caleb Howington, Alex Opremcak, R. McDermott +3 more

As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.

IEEE Transactions on Applied Superconductivity•Apr 2, 2019•32 citations

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•11 citations

High-fidelity qubit measurement with a microwave-photon counter

Luke C. G. Govia, Emily Pritchett, Canran Xu +4 more

High-fidelity, efficient quantum nondemolition readout of quantum bits is integral to the goal of quantum computation. As superconducting circuits approach the requirements of scalable, universal fault tolerance, qubit readout must also meet the demand of simplicity to scale with growing system size. Here we propose a fast, high-fidelity, scalable measurement scheme based on the state-selective ring-up of a cavity followed by photodetection with the recently introduced Josephson photomultiplier (JPM), a current-biased Josephson junction. This scheme maps qubit state information to the binary digital output of the JPM, circumventing the need for room-temperature heterodyne detection and offering the possibility of a cryogenic interface to superconducting digital control circuitry. Numerics show that measurement contrast in excess of 95% is achievable in a measurement time of 140 ns. We discuss perspectives to scale this scheme to enable readout of multiple qubit channels with a single JPM.

arXiv:1502.01564•Physical Review A•Dec 2, 2014•41 citations

Interfacing superconducting quantum processors with cryogenic digital circuitry

B. L. T. Plourde

Superconducting qubits based on Josephson junctions are one of the leading candidates for building a largescale quantum information processor. There have been significant advances in the performance of superconducting qubits over the past decade and there is currently rapid progress in the development of systems with up to tens of qubits. In order to build to yet larger systems, new techniques will need to be developed to address the overhead requirements for room-temperature electronics hardware and cryostat wiring for controlling and reading out large numbers of qubits. One approach to this challenge involves implementing more of the qubit control and readout in the low-temperature environment. I will describe our efforts on integrating superconducting classical digital circuitry with superconducting qubits for coherent control and readout.

Photonics for Quantum (PfQ)•Aug 27, 2021•0 citations

Power Reduction of Sfq Readout Circuit for Superconducting Quantum Computers

Masumi Kanda, Yuki Matsumoto, Teruo Tanimoto +2 more

The digital circuits in a superconducting quantum computer must be cooled to cryogenic temperatures in a dilution refrigerator for control and information readout of the qubit information. Because the dilution refrigerator's heat capacity is limited, extremely low-power digital circuits are required. Single-flux-quantum (SFQ) circuits and Josephson photomultipliers (JPMs) are expected to serve as control and readout circuits for superconducting quantum computers. These circuits generate minimal heat, but further reductions in power consumption are required to make it possible to build larger, more scalable faulttolerant quantum computers (FTQC). In this paper, we propose a low-power and reliable peripheral circuit for JPM-based qubit readout utilizing an SFQ counter circuit. The counter performs majority voting across repeated readouts, significantly improving the reliability of the JPM readout process. Additionally, we quantitatively evaluate switching errors in SFQ circuits using Josephson junctions with low-critical current values. By integrating these circuit techniques and simulation results, we find that the proposed approach achieves a 90% reduction in power consumption while effectively suppressing the increase in readout error.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•0 citations

Scalable Quantum Computing Infrastructure Based on Superconducting Electronics

Oleg A. Mukhanov, Alex F. Kirichenko, Caleb Howington +10 more

An approach for scalable quantum computing infrastructure based on the use of low-power digital superconducting single flux quantum (SFQ) circuits is described. Rather than replicating the room-temperature microwave control and measurement infrastructure solutions dominating the current systems, we use the inherent to superconducting technology methods - the use of SFQ pulses directly at the base temperature. For qubit control, we irradiate qubits with the coherent SFQ pulse sequences computed using optical control theory. For qubit measurement, Josephson photon counter performs projective quantum measurement, the result of which is converted to digital SFQ output. These operations are aided by a high-speed digital SFQ coprocessor located at higher temperature stage (e.g., 3 K) to process the measurement results and load new control sequences to 20 mK SFQ quantum-classical interface circuits.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 1, 2019•45 citations
In the quest to build a fault-tolerant quantum computer, superconducting circuits based on Josephson junctions have emerged as a leading architecture. Coherence times have increased significantly over the last two decades, and processors with ∼ 50 qubits have been experimentally demonstrated. These systems traditionally utilize microwave frequency control signals, and heterodyne based detection schemes for measurement. Both of these techniques rely heavily on room temperature microwave generators, high-bandwidth lines from room temperature to millikelvin temperatures, and bulky non-reciprocal elements such as cryogenic microwave isolators. Reliance on these elements makes it impractical to scale existing devices up a single order of magnitude, let alone the 5-6 orders of magnitude needed for performing fault-tolerant quantum algorithms. Here, I present results that suggesting superconducting digital logic, namely Single Flux Quantum (SFQ) logic, can replace analog control and measurement techniques, avoiding the significant overhead involved. I describe a scheme for measuring qubits with a device known as a Josephson Photomultiplier (JPM), which crucially stores the result of a qubit measurement in a classical circulating supercurrent within the device and allows for integration with SFQ detection circuitry. This technique is experimentally demonstrated, with single-shot measurement fidelity of 92%. Two methods for accessing this measurement result are presented, one utilizing ballistic fluxons, and another utilizing flux comparison. Initial experimental results of the latter are presented. In addition, I describe a scheme for controlling qubits with sequences of digital SFQ pulses. This method is then used to control a qubit without a microwave signal generator, with results of an average single-qubit gate fidelity of around 95%. When combined, these techniques form a nearly fully digital interface to superconducting qubits, which could allow these systems to scale much more easily.
As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.
High-fidelity, efficient quantum nondemolition readout of quantum bits is integral to the goal of quantum computation. As superconducting circuits approach the requirements of scalable, universal fault tolerance, qubit readout must also meet the demand of simplicity to scale with growing system size. Here we propose a fast, high-fidelity, scalable measurement scheme based on the state-selective ring-up of a cavity followed by photodetection with the recently introduced Josephson photomultiplier (JPM), a current-biased Josephson junction. This scheme maps qubit state information to the binary digital output of the JPM, circumventing the need for room-temperature heterodyne detection and offering the possibility of a cryogenic interface to superconducting digital control circuitry. Numerics show that measurement contrast in excess of 95% is achievable in a measurement time of 140 ns. We discuss perspectives to scale this scheme to enable readout of multiple qubit channels with a single JPM.
Superconducting qubits based on Josephson junctions are one of the leading candidates for building a largescale quantum information processor. There have been significant advances in the performance of superconducting qubits over the past decade and there is currently rapid progress in the development of systems with up to tens of qubits. In order to build to yet larger systems, new techniques will need to be developed to address the overhead requirements for room-temperature electronics hardware and cryostat wiring for controlling and reading out large numbers of qubits. One approach to this challenge involves implementing more of the qubit control and readout in the low-temperature environment. I will describe our efforts on integrating superconducting classical digital circuitry with superconducting qubits for coherent control and readout.
The digital circuits in a superconducting quantum computer must be cooled to cryogenic temperatures in a dilution refrigerator for control and information readout of the qubit information. Because the dilution refrigerator's heat capacity is limited, extremely low-power digital circuits are required. Single-flux-quantum (SFQ) circuits and Josephson photomultipliers (JPMs) are expected to serve as control and readout circuits for superconducting quantum computers. These circuits generate minimal heat, but further reductions in power consumption are required to make it possible to build larger, more scalable faulttolerant quantum computers (FTQC). In this paper, we propose a low-power and reliable peripheral circuit for JPM-based qubit readout utilizing an SFQ counter circuit. The counter performs majority voting across repeated readouts, significantly improving the reliability of the JPM readout process. Additionally, we quantitatively evaluate switching errors in SFQ circuits using Josephson junctions with low-critical current values. By integrating these circuit techniques and simulation results, we find that the proposed approach achieves a 90% reduction in power consumption while effectively suppressing the increase in readout error.
An approach for scalable quantum computing infrastructure based on the use of low-power digital superconducting single flux quantum (SFQ) circuits is described. Rather than replicating the room-temperature microwave control and measurement infrastructure solutions dominating the current systems, we use the inherent to superconducting technology methods - the use of SFQ pulses directly at the base temperature. For qubit control, we irradiate qubits with the coherent SFQ pulse sequences computed using optical control theory. For qubit measurement, Josephson photon counter performs projective quantum measurement, the result of which is converted to digital SFQ output. These operations are aided by a high-speed digital SFQ coprocessor located at higher temperature stage (e.g., 3 K) to process the measurement results and load new control sequences to 20 mK SFQ quantum-classical interface circuits.