Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Quantum legitimacy of reversible gate and a new design of multiplier based on R gate*

Tingyu Ge, Tinggui Zhang, Xiaofen Huang

Published Mar 9, 2020• 2 citations
Publisher

Abstract

Quantum full adders play a key role in the design of quantum computers. The efficiency of a quantum adder directly determines the speed of the quantum computer, and its complexity is closely related to the difficulty and the cost of building a quantum computer. The existed full adder based on R gate is a great design but it is not suitable to construct a quantum multiplier. We show the quantum legitimacy of some common reversible gates, then use R gate to propose a new design of a quantum full adder. We utilize the new designed quantum full adder to optimize the quantum multiplier which is based on R gate. It is shown that the new designed one can be optimized by a local optimization rule so that it will have lower quantum cost than before.

DOI
10.1088/1674-1056/ab7d9d

Related papers

An analysis of reversible multiplier circuits

Anindita Banerjee, Anirban Pathak

Multiplier circuits play an important role in reversible computation, which is helpful in diverse areas such as low power CMOS design, optical computing, DNA computing and bioinformatics. Here we propose a new reversible multiplier circuit with optimized hardware complexity. The optimized multiplier circuit is compared with the earlier proposals. We have shown that the quantum cost of earlier proposals can be further reduced with the help of existing local optimization algorithms (e.g. template matching, moving rule and deletion rule). A systematic protocol for reduction of quantum cost has been proposed. It has also been shown that the advantage in gate count obtained in some of the earlier proposals by introduction of new reversible gates is an artifact and if it is allowed then every circuit block can be reduced to a single gate. Further, it is shown that the 4x4 reversible gates proposed for designing of a component of multiplier circuit (full adder) is neither unique nor special and many such 4x4 gates may be proposed. As example three such new gates have been presented here and it is shown that the proposed gates are universal. It is also shown that the total cost of our design is minimum.

arXiv:0907.3357•Jul 20, 2009•15 citations

A NOVEL REVERSIBLE ZS GATE AND ITS APPLICATION FOR OPTIMIZATION OF QUANTUM ADDER CIRCUITS

Ri‐Gui Zhou, Yang Shi, Manqun Zhang +1 more

The key of optimizing quantum reversible logic lies in automatically constructing quantum reversible logic circuits with the minimal quantum cost. This paper constructs a 4 × 4 reversible gate called ZS gate to build quantum full adder. At the same time, a novel reversible No-Wait-Carry adder (or carry skip adder) by using ZSCGPD based on ZS gate with the least cost is also designed. The adder circuit using the proposed ZSCGPD is much better and optimized than other researchers' counterparts both in terms of garbage outputs, number and kind of reversible gates, and quantum cost. In order to show the efficiency of the proposed designs, lower bounds of the reversible carry skip adder in terms of garbage outputs and quantum cost are proposed as well.

Journal of Circuits Systems and Computers•May 4, 2011•13 citations

Novel Quaternary Quantum Reversible Half Adder and Full Adder Circuits

Abdollah Norouzi Doshanlou, Majid Haghparast, Mehdi Hosseinzadeh

One of the major problems in designing highly compact digital systems is the rate of power consumption and internal heat generated by the loss of information during the computation. The tendency of current circuit design technologies is towards Nanoscale. Quaternary reversible logic is an emerging technology for the future designing of the quantum systems since quantum reversible circuits can be realized in Nanoscales. The adder building block is an essential part of any computer system. This block must be designed efficiently. We proposed a new quaternary quantum reversible half adder with the quantum cost of 17 and a quaternary quantum reversible full adder with a quantum cost of 23. For the first time in the literature, we report that we proposed quaternary quantum reversible half adder as well as full adder with an optimum number of constant inputs. As the circuit lines in the domain of quantum computation are considered to be a very limited resource, the achievements in this paper are promising. The proposed circuits are efficient in terms of all figures of merits in comparison to the existing counterparts. To design these adder circuits, we used 1-qudit and 2-qudit quaternary gates.

IETE Journal of Research•Aug 29, 2019•12 citations

Design of Reversible Binary Half and Full Adder/Subtractor Using Reversible Gates

Arwa S. Bazmalah, Noorfazila Kamal

The power consumption in classical computers has grown to be a critical issue. Thus, quantum computers have become a promising alternative to classical computers for more processing power and lower energy consumption. Reversible gates are important for building the quantum computers. Reversible circuits have various applications, such as digital signal processing, optical computing, quantum computing, etc. The design and synthesis of reversible gates and circuits have grown in popularity and attracted the attention of many researchers. The adder and subtractor are important computation blocks for the structure of the Arithmetic Logic Unit (ALU). In this paper, a design of reversible binary half and full adders and subtractors using reversible logic gates is proposed. The TR (Thapliyal Ranganathan) and Peres gates are used to construct the reversible half adder and subtractor circuit. Meanwhile, the Double Peres Gate (DPG), Fredkin, and NOT gates are used to build the reversible 1-bit full adder and subtractor circuit. The designs are optimized in terms of number of gates, constant inputs, garbage outputs, and quantum cost. The truth table representation and the Binary Decision Diagram (BDD) synthesis method are used to represent and synthesize the circuits, respectively. The circuits are synthesized and simulated using the Verilog Hardware Description Language code and Xilinx ISE 14.7. The results show that the proposed designs achieve the lowest quantum cost in both half adder/subtractor and full adder/subtractor. As the half adder/subtractor has six quantum cost and the full adder/subtractor has nine quantum cost.

Progress in Engineering Application and Technology•Dec 19, 2022•0 citations

OPTIMIZED REVERSIBLE MULTIPLIER CIRCUIT

Majid Haghparast, MAJID MOHAMMADI, Keivan Navi +1 more

Reversible logic circuits have received significant attention in quantum computing, low power CMOS design, optical information processing, DNA computing, bioinformatics, and nanotechnology. This paper presents two new 4 × 4 bit reversible multiplier designs which have lower hardware complexity, less garbage bits, less quantum cost and less constant inputs than previous ones, and can be generalized to construct efficient reversible n × n bit multipliers. An implementation of reversible HNG is also presented. This implementation shows that the full adder design using HNG is one of the best designs in term of quantum cost. An implementation of MKG is also presented in order to have a fair comparison between our proposed reversible multiplier designs and the existing counterparts. The proposed reversible multipliers are optimized in terms of quantum cost, number of constant inputs, number of garbage outputs and hardware complexity. They can be used to construct more complex systems in nanotechnology.

Journal of Circuits Systems and Computers•Apr 1, 2009•106 citations

A new reversible design of BCD adder

Himanshu Thapliyal, Nagarajan Ranganathan

Reversible logic is one of the emerging technologies having promising applications in quantum computing. In this work, we present new design of the reversible BCD adder that has been primarily optimized for the number of ancilla input bits and the number of garbage outputs. The number of ancilla input bits and the garbage outputs is primarily considered as an optimization criteria as it is extremely difficult to realize a quantum computer with many qubits. As the optimization of ancilla input bits and the garbage outputs may degrade the design in terms of the quantum cost and the delay, thus the quantum cost and the delay parameters are also considered for optimization with primary focus towards the optimization of the number of ancilla input bits and the garbage outputs. Firstly, we propose a new design of the reversible ripple carry adder having the input carry Co and is designed with no ancilla input bits. The proposed reversible ripple carry adder design with no ancilla input bits has less quantum cost and the logic depth (delay) compared to its existing counterparts. The existing reversible Peres gate and a new reversible gate called the TR gate is efficiently utilized to improve the quantum cost and the delay of the reversible ripple carry adder. The improved quantum design of the TR gate is also illustrated. Finally, the reversible design of the BCD adder is presented which is based on a 4 bit reversible binary adder to add the BCD number, and finally the conversion of the binary result to the BCD format using a reversible binary to BCD converter.

Design, Automation, and Test in Europe•Mar 1, 2011•66 citations
Quantum full adders play a key role in the design of quantum computers. The efficiency of a quantum adder directly determines the speed of the quantum computer, and its complexity is closely related to the difficulty and the cost of building a quantum computer. The existed full adder based on R gate is a great design but it is not suitable to construct a quantum multiplier. We show the quantum legitimacy of some common reversible gates, then use R gate to propose a new design of a quantum full adder. We utilize the new designed quantum full adder to optimize the quantum multiplier which is based on R gate. It is shown that the new designed one can be optimized by a local optimization rule so that it will have lower quantum cost than before.
Multiplier circuits play an important role in reversible computation, which is helpful in diverse areas such as low power CMOS design, optical computing, DNA computing and bioinformatics. Here we propose a new reversible multiplier circuit with optimized hardware complexity. The optimized multiplier circuit is compared with the earlier proposals. We have shown that the quantum cost of earlier proposals can be further reduced with the help of existing local optimization algorithms (e.g. template matching, moving rule and deletion rule). A systematic protocol for reduction of quantum cost has been proposed. It has also been shown that the advantage in gate count obtained in some of the earlier proposals by introduction of new reversible gates is an artifact and if it is allowed then every circuit block can be reduced to a single gate. Further, it is shown that the 4x4 reversible gates proposed for designing of a component of multiplier circuit (full adder) is neither unique nor special and many such 4x4 gates may be proposed. As example three such new gates have been presented here and it is shown that the proposed gates are universal. It is also shown that the total cost of our design is minimum.
The key of optimizing quantum reversible logic lies in automatically constructing quantum reversible logic circuits with the minimal quantum cost. This paper constructs a 4 × 4 reversible gate called ZS gate to build quantum full adder. At the same time, a novel reversible No-Wait-Carry adder (or carry skip adder) by using ZSCGPD based on ZS gate with the least cost is also designed. The adder circuit using the proposed ZSCGPD is much better and optimized than other researchers' counterparts both in terms of garbage outputs, number and kind of reversible gates, and quantum cost. In order to show the efficiency of the proposed designs, lower bounds of the reversible carry skip adder in terms of garbage outputs and quantum cost are proposed as well.
One of the major problems in designing highly compact digital systems is the rate of power consumption and internal heat generated by the loss of information during the computation. The tendency of current circuit design technologies is towards Nanoscale. Quaternary reversible logic is an emerging technology for the future designing of the quantum systems since quantum reversible circuits can be realized in Nanoscales. The adder building block is an essential part of any computer system. This block must be designed efficiently. We proposed a new quaternary quantum reversible half adder with the quantum cost of 17 and a quaternary quantum reversible full adder with a quantum cost of 23. For the first time in the literature, we report that we proposed quaternary quantum reversible half adder as well as full adder with an optimum number of constant inputs. As the circuit lines in the domain of quantum computation are considered to be a very limited resource, the achievements in this paper are promising. The proposed circuits are efficient in terms of all figures of merits in comparison to the existing counterparts. To design these adder circuits, we used 1-qudit and 2-qudit quaternary gates.
The power consumption in classical computers has grown to be a critical issue. Thus, quantum computers have become a promising alternative to classical computers for more processing power and lower energy consumption. Reversible gates are important for building the quantum computers. Reversible circuits have various applications, such as digital signal processing, optical computing, quantum computing, etc. The design and synthesis of reversible gates and circuits have grown in popularity and attracted the attention of many researchers. The adder and subtractor are important computation blocks for the structure of the Arithmetic Logic Unit (ALU). In this paper, a design of reversible binary half and full adders and subtractors using reversible logic gates is proposed. The TR (Thapliyal Ranganathan) and Peres gates are used to construct the reversible half adder and subtractor circuit. Meanwhile, the Double Peres Gate (DPG), Fredkin, and NOT gates are used to build the reversible 1-bit full adder and subtractor circuit. The designs are optimized in terms of number of gates, constant inputs, garbage outputs, and quantum cost. The truth table representation and the Binary Decision Diagram (BDD) synthesis method are used to represent and synthesize the circuits, respectively. The circuits are synthesized and simulated using the Verilog Hardware Description Language code and Xilinx ISE 14.7. The results show that the proposed designs achieve the lowest quantum cost in both half adder/subtractor and full adder/subtractor. As the half adder/subtractor has six quantum cost and the full adder/subtractor has nine quantum cost.
Reversible logic circuits have received significant attention in quantum computing, low power CMOS design, optical information processing, DNA computing, bioinformatics, and nanotechnology. This paper presents two new 4 × 4 bit reversible multiplier designs which have lower hardware complexity, less garbage bits, less quantum cost and less constant inputs than previous ones, and can be generalized to construct efficient reversible n × n bit multipliers. An implementation of reversible HNG is also presented. This implementation shows that the full adder design using HNG is one of the best designs in term of quantum cost. An implementation of MKG is also presented in order to have a fair comparison between our proposed reversible multiplier designs and the existing counterparts. The proposed reversible multipliers are optimized in terms of quantum cost, number of constant inputs, number of garbage outputs and hardware complexity. They can be used to construct more complex systems in nanotechnology.
Reversible logic is one of the emerging technologies having promising applications in quantum computing. In this work, we present new design of the reversible BCD adder that has been primarily optimized for the number of ancilla input bits and the number of garbage outputs. The number of ancilla input bits and the garbage outputs is primarily considered as an optimization criteria as it is extremely difficult to realize a quantum computer with many qubits. As the optimization of ancilla input bits and the garbage outputs may degrade the design in terms of the quantum cost and the delay, thus the quantum cost and the delay parameters are also considered for optimization with primary focus towards the optimization of the number of ancilla input bits and the garbage outputs. Firstly, we propose a new design of the reversible ripple carry adder having the input carry Co and is designed with no ancilla input bits. The proposed reversible ripple carry adder design with no ancilla input bits has less quantum cost and the logic depth (delay) compared to its existing counterparts. The existing reversible Peres gate and a new reversible gate called the TR gate is efficiently utilized to improve the quantum cost and the delay of the reversible ripple carry adder. The improved quantum design of the TR gate is also illustrated. Finally, the reversible design of the BCD adder is presented which is based on a 4 bit reversible binary adder to add the BCD number, and finally the conversion of the binary result to the BCD format using a reversible binary to BCD converter.