Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific International Conference Najaf (SICN)

Comparison between Different Decoding Algorithms For Low Density Parity Check

Mahmood Farhan Mosleh, Fadhil Sahib Hasan, Ruaa Majeed Azeez

Published Apr 1, 2019• 5 citations
Publisher

Abstract

Forward error correction code with Low Density Parity Check (LDPC) gives substantial results very close to Shannon limit. This can be achieved when complexity and delay time is unlimited. Thus, it is significant to recognize the limitation of those parameters in the decoding of LDPC. In this research, a study of LDPC performance with three decoding algorithms namely; bit-flipping, log domain, and prob domain are presented. The first one is related to hard decision family while the last two types are the soft decision that follows the sum-product algorithm. A simulation model of a wireless communication system included LDPC are evaluated with the motioned three types of decoding using Matlab Package, version 2018a. The results show that the log domain and prob domain are outperforming the bit-flipping algorithm by a significant amount of Signal to Noise Ratio (SNR). Finally, optimum values of LDPC parameters are chosen according to the achieved results that will give better results are presented.

DOI
10.1109/sicn47020.2019.9019379

Related papers

Performance Evaluation of LDPC decoding Algorithm for GF (2)

D Patel Jigisha, Patel Ruchita Kumari

Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.

Journal of Emerging Technologies and Innovative Research•Nov 1, 2014•0 citations

Düşük yoğunluklu eşlik denetim kodları için kod çözme algoritmalarının karşılaştırılması.

Kolaylı, Mert

Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.

•Jan 1, 2006•0 citations

Performance Analysis of LDPC Decoding Techniques

Abdel Halim A. Zikry, Ashraf Yehya Hassan, Wageda I. Shaban +1 more

Low density parity checking codes (LDPC) are one of the most important issues in coding theory at present. LDPC-code are a type of linear-block LDPC-codes. Channel coding might be considered as the finest conversant and most potent components of cellular communications systems, that was employed for transmitting errors corrections imposed by noise, fading and interfering. LDPC-codes are advanced coding gain, i.e., new area in coding. the performances of LDPC-code are similar to the Shannon-limiting, this led to the usage of decoding in several applications in digital communications systems, like DVB-S2 and WLAN802.1..This paper aims to know what is LDPC,what its application and introduce encoding algorithms that gives rise to a linear encoding time and also show that the regular and irregular LDPC performance and also introduce different methods for decoding LDPC. I discuss in detail LDPC decoding algorithm: bit flipping algorithm, as a type from hard decision .belief propagation algorithm, sum product algorithm and minimum sum algorithm as examples from soft decision .I expect that at least some students or researchers involved in researching LDPC codes would find this paper helpful.

International Journal of Recent Technology and Engineering (IJRTE)•Jan 30, 2021•5 citations

Performance Analysis of Different Flexible Decoding Algorithms for NR-LDPC Codes

Layla Mahdi Salih, Thuraya Mahmood Qaradaghi, Jalal J. Hamad Ameen

Channel coding technique is a fundamental building block in any modern communication system to realize reliable, fast, and secure data transmission. At the same time, it is a challenging and crucial task, as the data transmission happens in a channel where noise, fading, and other impairments are present. The Low-Density Parity-Check (LDPC) codes give substantial results close to the Shannon limit when the complexity and processing delay time are unlimited. In this paper, the performance of the LDPC decoding with four algorithms was investigated. The investigated four algorithms were Belief Propagation (BP), Layered Belief Propagation (LBP), Normalized min-sum (NMS), and Offset min-sum (OMS). These algorithms were examined for code rates ranging from 1/3 to 9/10 and message block lengths (64, 512, 1024, and 5120) bits. The simulation results revealed the flexibility of these decoders in supporting these code rates and block lengths, which enables their usage in a wide range of applications and scenarios for fifth-generation (5G) wireless communication. In addition, the effect of the maximum number of decoding iterations on the error correction performance was investigated, and a gain of 5.6 dB can be obtained by using 32 decoding iterations at BER=2*10-3 instead of one decoding iteration. The results showed that the decoders performed better for longer message blocks than for short message blocks, and less power was required for transmitting longer messages. Finally, the comparison results of their performance in terms of bit error rate (BER) under the same conditions showed a gain of 0.8 dB using LBP at BER= 10-5 compared with the NMS decoding algorithm.

Tikrit Journal of Engineering Sciences•Dec 11, 2022•3 citations

New low-density-parity-check decoding approach based on the hard and soft decisions algorithms

Hajar El Ouakili, Hassan Touati, Abdelilah Kadi +2 more

It is proved that hard decision algorithms are more appropriate than a soft decision for low-density parity-check (LDPC) decoding since they are less complex at the decoding level. On the other hand, it is notable that the soft decision algorithm outperforms the hard decision one in terms of the bit error rate (BER) gap. In order to minimize the BER and the gap between these two families of LDPC codes, a new LDPC decoding algorithm is suggested in this paper, which is based on both the normalized min-sum (NMS) and modified-weighted bit-flipping (MWBF). The proposed algorithm is named normalized min sum- modified weighted bit flipping (NMSMWBF). The MWBF is executed after the NMS algorithm. The simulations show that our algorithm outperforms the NMS in terms of BER at 10-8 over the additive white gaussian noise (AWGN) channel by 0.25 dB. Furthermore, the proposed NMSMWBF and the NMS are both at the same level of decoding difficulty.

International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering•Dec 11, 2022•6 citations

FFT based sum product decoding algorithm of LDPC coder for GF(q)

Jigisha N. Patel, Neeta Chapatwala, Mrugesh Patel

Low Density Parity Check (LDPC) codes have excellent error correcting performance. LDPC codes are one of the block coding techniques and it performs near Shannon limit and recommended for many practical applications. Non-binary LDPC codes extension of binary LDPC in error correcting property especially for short and moderate block length. In many digital communication systems these codes have strong competitors of turbo codes for error control. Low Density Parity Check as it name is suggests that in a parity check matrix (H) consists of very small number of non-zero elements comparing with zero elements. The strength of the LDPC code defines Parity Check Matrix (PCM). LDPC code contains two types of decoding algorithms hard and soft decision algorithm. By comparing with other traditional decoding algorithm FFT based sum product algorithm reduced computation complexity with better decoding performance. In this paper, LDPC codes for FFT based sum product decoding algorithm performances are analysed for various order of Galois Field GF(q) using AWGN channel. Decoding performance measured in terms of symbol error rate which improve with increasing order of Galois field.

International Conference on Emerging Technology Trends in Electronics, Communication and Networking (ET2ECN)•Dec 1, 2014•3 citations
Forward error correction code with Low Density Parity Check (LDPC) gives substantial results very close to Shannon limit. This can be achieved when complexity and delay time is unlimited. Thus, it is significant to recognize the limitation of those parameters in the decoding of LDPC. In this research, a study of LDPC performance with three decoding algorithms namely; bit-flipping, log domain, and prob domain are presented. The first one is related to hard decision family while the last two types are the soft decision that follows the sum-product algorithm. A simulation model of a wireless communication system included LDPC are evaluated with the motioned three types of decoding using Matlab Package, version 2018a. The results show that the log domain and prob domain are outperforming the bit-flipping algorithm by a significant amount of Signal to Noise Ratio (SNR). Finally, optimum values of LDPC parameters are chosen according to the achieved results that will give better results are presented.
Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.
Low-density parity-check (LDPC) codes are a subclass of linear block codes. These codes have parity-check matrices in which the ratio of the non-zero elements to all elements is low. This property is exploited in defining low complexity decoding algorithms. Low-density parity-check codes have good distance properties and error correction capability near Shannon limits. In this thesis, the sum-product and the bit-flip decoding algorithms for low-density parity-check codes are implemented on Intel Pentium M 1,86 GHz processor using the software called MATLAB. Simulations for the two decoding algorithms are made over additive white gaussian noise (AWGN) channel changing the code parameters like the information rate, the blocklength of the code and the column weight of the parity-check matrix. Performance comparison of the two decoding algorithms are made according to these simulation results. As expected, the sum-product algorithm, which is based on soft-decision decoding, outperforms the bit-flip algorithm, which depends on hard-decision decoding. Our simulations show that the performance of LDPC codes improves with increasing blocklength and number of iterations for both decoding algorithms. Since the sum-product algorithm has lower error-floor characteristics, increasing the number of iterations is more effective for the sum-product decoder compared to the bit-flip decoder. By having better BER performance for lower information rates, the bit-flip algorithm performs according to the expectations; however, the performance of the sum-product decoder deteriorates for information rates below 0.5 instead of improving. By irregular construction of LDPC codes, a performance improvement is observed especially for low SNR values.
Low density parity checking codes (LDPC) are one of the most important issues in coding theory at present. LDPC-code are a type of linear-block LDPC-codes. Channel coding might be considered as the finest conversant and most potent components of cellular communications systems, that was employed for transmitting errors corrections imposed by noise, fading and interfering. LDPC-codes are advanced coding gain, i.e., new area in coding. the performances of LDPC-code are similar to the Shannon-limiting, this led to the usage of decoding in several applications in digital communications systems, like DVB-S2 and WLAN802.1..This paper aims to know what is LDPC,what its application and introduce encoding algorithms that gives rise to a linear encoding time and also show that the regular and irregular LDPC performance and also introduce different methods for decoding LDPC. I discuss in detail LDPC decoding algorithm: bit flipping algorithm, as a type from hard decision .belief propagation algorithm, sum product algorithm and minimum sum algorithm as examples from soft decision .I expect that at least some students or researchers involved in researching LDPC codes would find this paper helpful.
Channel coding technique is a fundamental building block in any modern communication system to realize reliable, fast, and secure data transmission. At the same time, it is a challenging and crucial task, as the data transmission happens in a channel where noise, fading, and other impairments are present. The Low-Density Parity-Check (LDPC) codes give substantial results close to the Shannon limit when the complexity and processing delay time are unlimited. In this paper, the performance of the LDPC decoding with four algorithms was investigated. The investigated four algorithms were Belief Propagation (BP), Layered Belief Propagation (LBP), Normalized min-sum (NMS), and Offset min-sum (OMS). These algorithms were examined for code rates ranging from 1/3 to 9/10 and message block lengths (64, 512, 1024, and 5120) bits. The simulation results revealed the flexibility of these decoders in supporting these code rates and block lengths, which enables their usage in a wide range of applications and scenarios for fifth-generation (5G) wireless communication. In addition, the effect of the maximum number of decoding iterations on the error correction performance was investigated, and a gain of 5.6 dB can be obtained by using 32 decoding iterations at BER=2*10-3 instead of one decoding iteration. The results showed that the decoders performed better for longer message blocks than for short message blocks, and less power was required for transmitting longer messages. Finally, the comparison results of their performance in terms of bit error rate (BER) under the same conditions showed a gain of 0.8 dB using LBP at BER= 10-5 compared with the NMS decoding algorithm.
It is proved that hard decision algorithms are more appropriate than a soft decision for low-density parity-check (LDPC) decoding since they are less complex at the decoding level. On the other hand, it is notable that the soft decision algorithm outperforms the hard decision one in terms of the bit error rate (BER) gap. In order to minimize the BER and the gap between these two families of LDPC codes, a new LDPC decoding algorithm is suggested in this paper, which is based on both the normalized min-sum (NMS) and modified-weighted bit-flipping (MWBF). The proposed algorithm is named normalized min sum- modified weighted bit flipping (NMSMWBF). The MWBF is executed after the NMS algorithm. The simulations show that our algorithm outperforms the NMS in terms of BER at 10-8 over the additive white gaussian noise (AWGN) channel by 0.25 dB. Furthermore, the proposed NMSMWBF and the NMS are both at the same level of decoding difficulty.
Low Density Parity Check (LDPC) codes have excellent error correcting performance. LDPC codes are one of the block coding techniques and it performs near Shannon limit and recommended for many practical applications. Non-binary LDPC codes extension of binary LDPC in error correcting property especially for short and moderate block length. In many digital communication systems these codes have strong competitors of turbo codes for error control. Low Density Parity Check as it name is suggests that in a parity check matrix (H) consists of very small number of non-zero elements comparing with zero elements. The strength of the LDPC code defines Parity Check Matrix (PCM). LDPC code contains two types of decoding algorithms hard and soft decision algorithm. By comparing with other traditional decoding algorithm FFT based sum product algorithm reduced computation complexity with better decoding performance. In this paper, LDPC codes for FFT based sum product decoding algorithm performances are analysed for various order of Galois Field GF(q) using AWGN channel. Decoding performance measured in terms of symbol error rate which improve with increasing order of Galois field.