The atom-light hybrid interferometer recently attracted much attention in the research of precision metrology for its combination of light and atomic spin wave. With the AC Stark effect and proper design, it can be applied in the scheme of quantum non-demolition (QND) measurement of photon numbers. In this work, we apply the QND criteria to the scheme and theoretically derive its explicit formulas with various losses of the atomic-light hybrid interferometer. With the formulas and actual experiment parameters, we estimate and compare the performance of the vapor-atom-based and cold-atom-based hybrid interferometer in the QND measurement, analyze the influences of different kinds of losses, and provide optimized working parameter ranges of the interferometer.
The atom-light hybrid interferometer recently attracted much attention in the research of precision metrology for its combination of light and atomic spin wave. With the AC Stark effect and proper design, it can be applied in the scheme of quantum non-demolition (QND) measurement of photon numbers. In this work, we apply the QND criteria to the scheme and theoretically derive its explicit formulas with various losses of the atomic-light hybrid interferometer. With the formulas and actual experiment parameters, we estimate and compare the performance of the vapor-atom-based and cold-atom-based hybrid interferometer in the QND measurement, analyze the influences of different kinds of losses, and provide optimized working parameter ranges of the interferometer.
Quantum non-demolition (QND) measurement is an important tool in the fields of quantum information processing and quantum optics. The atom-light hybrid interferometer is of great interest due to its combination of an atomic spin wave and an optical wave, which can be utilized for photon number QND measurement via the AC-Stark effect. In this paper, we present an SU(1,1)-SU(2)-concatenated atom-light hybrid interferometer, and theoretically study QND measurement of the photon number. Compared to the traditional SU(2) interferometer, the signal-to-noise ratio in a balanced case is improved by a gain factor of the nonlinear Raman process (NRP) in this proposed interferometer. Furthermore, the condition of high-quality QND measurement is analyzed. In the presence of losses, the measurement quality is reduced. We can adjust the gain parameter of the NRP in the readout stage to reduce the impact due to losses. Moreover, this scheme is a multiarm interferometer, which has the potential of multiparameter estimation with many important applications in the detection of vector fields, quantum imaging, and so on.
When atoms are illuminated by an off-resonant field, the AC Stark effect will lead to phase shifts in atomic states. The phase shifts are proportional to the photon number of the off-resonant illuminating field. By measuring the atomic phase with newly developed atom-light hybrid interferometers, we can achieve quantum non-demolition measurement of the photon number of the optical field. In this paper, we analyze theoretically the performance of this QND measurement scheme by using the QND measurement criteria established by Holland et al [Phys. Rev. A 42, 2995 (1990)]. We find the quality of the QND measurement depends on the phase resolution of the atom-light hybrid interferometers. We apply this QND measurement scheme to a twin-photon state from parametric amplifier to verify the photon correlation in the twin beams. Furthermore, a sequential QND measurement procedure is analyzed for verifying the projection property of quantum measurement and for the quantum information tapping. Finally, we discuss the possibility for single-photon-number-resolving detection via QND measurement.
Quantum non-demolition (QND) measurement is an important tool in the field of quantum information processing and quantum optics. The atom-light hybrid interferometer is of great interest due to its combination of atomic spin wave and optical wave, which can be utilized for photon number QND measurement via the AC-Stark effect. In this paper, we present an actively correlated atom-light hybrid interferometer where the output is detected with the method of active correlation output readout via a nonlinear Raman process (NRP). Then this interferometer is used for QND measurement of photon number and the signal-to-noise ratio (SNR) is studied. Compared to the traditional SU(2) interferometer, the SNR in a balanced case is improved by a gain factor of g of NRP. Furthermore, the performance of QND measurement is analyzed. In the presence of losses, the measurement quality is reduced. We can adjust the gain parameter of the NRP in readout stage to reduce the impact due to losses. Moreover, this scheme is a multiarm interferometer, which has the potential of multiparameter estimation with many important applications in the detection of vector fields, quantum imaging and so on.
Abstract Quantum nondemolition (QND) measurement plays an essential role in quantum optics and quantum information. Here, a feedback-assisted atom-light-correlated interferometer (FALCI) is proposed and applied to the QND measurement of photon number, in which the phase of the probe acquires information about the photon number of the signal without perturbing it due to the AC-Stark effect. A beam splitter with adjustable reflectivity is employed as a feedback controller to enhance the performance of QND measurement. The FALCI harnesses interference between quantum-correlated atoms and light to perform the measurement. It is found that the quantum correlation can be enhanced by manipulating the feedback ratio. Furthermore, the QND measurement sensitivity is theoretically studied via homodyne detection. It is demonstrated that the FALCI can achieve the sensitivity enhancement with suitable feedback ratio. For the lossy case, feedback control can mitigate the effect of losses on the sensitivity.
This thesis investigates the generation of atomic spin-squeezed states by quantum non-demolition (QND) measurements in a high-finesse optical cavity. Cold atom interferometry has demonstrated state of the art performance for the measurement of tiny rotations, accelerations and time. The sensitivity of atom interferometers has already reached the atomic shot noise level, a limit that could be overcome by the use of non-classical atomic states. In this context, we developed a crossed high-finesse cavity resonating both at 1560 nm and 780 nm. Laser light at 1560 nm injected in the cavity generates a far off resonance optical dipole trap where Rb 87 cold atoms are loaded from a magneto-optical trap. The lifetime of the atoms in this dipole trap is limited by the residual background collisions, indicating that further evaporation process should be effective. The concepts of QND measurement are introduced and a wavefunction formalism that describes the spin-squeezing dynamics of the atomic state is discussed. This formalism is applied to practical measurement apparatus that are the Mach-Zehnder interferometer and the heterodyne detection. Experimentally, this non-destructive measurement was implemented at 780 nm in a frequency modulation scheme strongly immune to noise. The influence of this non-demolition probe on the atomic sample has been characterized in single pass and this tool has been applied to follow in real time the state of atomic interferometers. In addition to this work, a narrow linewidth Raman laser suitable for high precision spectroscopy was implemented with cold atoms as the gain medium.
The measurement of physical quantities and measurement units standard promote the development of metrology. Especially, the developments of laser interference and atomic frequency standard bring a revolutionary leap for metrology. Many precision measurement techniques have been proposed and experimentally demonstrated, such as gravitational wave measurements and laser gyroscopes based on laser interferometry, and atomic clocks and atomic gyroscopes based on the atom interferometry. Recently, a new branch of science, quantum metrology, has grown up to further explore and exploit the quantum techniques for precision measurement of physical quantities.#br#This paper will focus on recent developments in quantum metrology and interference based on coherence and correlation of light and atom. Firstly, we briefly review the development of metrology. Then, we introduce our own researches in recent years, including quantum-correlation SU(1,1) optical interferometer based on four wave mixing process in atomic vapor and the atom-light hybrid interferometer based on Raman scattering in atomic vapor.#br#Interferometer is a powerful tool to measure physical quantities sensitive to the inference wave with high precision, and has been widely used in scientific research, industry test, navigation and guidance system. For example, the laser interferometer is able to measure optical phase sensitive quantities, including length, angular velocity, gravitational wave and so on. Meanwhile, the atom interferometer is sensitive to the change of atomic phase caused by the light, gravity, electric and magnetic fields. As a new type of interferometry, the atom-light hybrid interferometer, is sensitive to both the optical phase and atomic phase. Furthermore, SU(1,1) interferometer and nonlinear atom-light hybrid interferometer have the ability to beat the standard quantum limit of phase sensitivity. Quantum interference technology, whose phase measurement accuracy can break through the limit of standard quantum limit, is the core of quantum metrology and quantum measurement technology.