References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 The propagation of light in dispersive media can be described by five different kinds of wave velocities [1-3]: • Phase velocity, which is the speed at which the zero crossings of the carrier wave move • Group velocity, at which the peak of a wave packet moves • Energy velocity, at which the energy is transported by the wave • Signal velocity, at which the half-maximum wave amplitude moves • Front velocity, at which the first appearance of a discontinuity moves Generally, all five velocities can differ from each other, although in a linear passive dispersive media, they coincide and are, usually, less than the light velocity in vacuum. Recently, experimental demonstrations [4-6] in variousmedia show that the group velocity of light canbe reducedby10-100million compared with its vacuum phase velocity. The physics is based on very steep frequency dispersion in the vicinity of narrow resonance of electromagnetically induced transparency (EIT) [7-11].
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 The propagation of light in dispersive media can be described by five different kinds of wave velocities [1-3]: • Phase velocity, which is the speed at which the zero crossings of the carrier wave move • Group velocity, at which the peak of a wave packet moves • Energy velocity, at which the energy is transported by the wave • Signal velocity, at which the half-maximum wave amplitude moves • Front velocity, at which the first appearance of a discontinuity moves Generally, all five velocities can differ from each other, although in a linear passive dispersive media, they coincide and are, usually, less than the light velocity in vacuum. Recently, experimental demonstrations [4-6] in variousmedia show that the group velocity of light canbe reducedby10-100million compared with its vacuum phase velocity. The physics is based on very steep frequency dispersion in the vicinity of narrow resonance of electromagnetically induced transparency (EIT) [7-11].
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
In early 1999, a news article in the prestigious journal Nature led off with the announcement, "An experiment with atoms at nanokelvin temperatures has produced the remarkable observation of light pulses traveling at velocities of only 17 m/s." The review continued with the understatement, "Observation of light pulses propagating at a speed no faster than a swiftly moving bicycle...comes as a surprise." These findings (and their review) marked the beginning of the current wave of interest in the field that has come to be called "slow light.â" When we refer to "the speed of light," we typically mean c, the phase velocity of light in a vacuum, or the speed of propagation of the phase fronts of monochromatic light. The phase fronts travel more slowly through a material, propagating at the speed c/n, where n is the index of refraction of the medium. However, this ordinary slowing of the phase velocity is not slow light. "Slow light" and "fast light" refer to changes in the group velocity of light in a medium. A pulse of light can be decomposed mathematically into a group of monochromatic waves at slightly different frequencies, as in Fig. 19.1. In a dispersive material, these monochromatic waves travel at different speeds. When one views the propagation of the pulse as a whole, its apparent velocity depends on the extent of the spread of individual monochromatic-wave velocities. Each monochromatic wave travels at its own phase velocity, while the pulse travels at the group velocity. Of course, the group velocity of a pulse of light is not a new concept. The field of slow and fast light has drawn on theory and developments from the work of Sommerfeld and Brillouin from 1907 to 1914, experiments with early laser amplifiers in 1966, and other work done through the end of the 20th century. (For more of the history behind slow and fast light, see Refs. 8 and 9.)
Manipulating the group velocity of light has resulted in many advances, including slowing light to a car’s pace, stopping light and even forcing pulses to propagate faster than the speed of light in a vacuum. While the group velocity is equal to or less than the speed of light in a vacuum (c) when propagating through a medium exhibiting normal dispersion, anomalous dispersion allows the group velocity to be greater than c, or even negative. Strangely, the peak of a pulse propagating with a negative group velocity through a medium appears to exit the medium before entering it. This is a result of interference from spectral components of a pulse propagating with different phase velocities in the medium.
As evidenced by this book, there has been a flurry of activity over the last decade on tailoring the dispersive properties of optical materials [1]. What has captured the attention of the research community were some of the early results on creating spectral regions of large normal dispersion [2-4]. Large normal dispersion results in extremely small group velocities, where the group velocity is the approximate speed at which a pulse of light propagates through a material. We denote the group velocity by υg = c/ng, where c is the speed of light in vacuum and ng is known as the group index. In the early experiments, described in greater detail in Chapter 1, a dilute gas of atoms is illuminated by a control or coupling beamwhose frequency is tuned precisely to an optical transition of an atom. This control field modifies the absorption and dispersion properties of another atomic transition that shares a common energy level. A narrow transparencywindow is created on this second transition-a process known as electromagnetically induced transparency (EIT)—and within this window, υg takes on extremely small values. Many experiments have now observed υg ∼ 1 m/s or less, implying ng > 108. This result is remarkable, considering the fact that the refractive index n of a material rarely exceeds 3 in the visible part of the spectrum.What are the implications of such large group indices? What applications are enabled by this basic science discovery?
Summary form only given. The propagation of light in a dispersive medium is characterized by the group velocity /spl nu//sub g/=c(n+/spl nu//sup dn//d/spl nu/)/sup .1/ where n is the refractive index and /spl nu/ the optical frequency. Depending on the sign and magnitude of /sup dn//d/spl nu/ in the medium, the group velocity can be positive, infinite or negative. The group velocity corresponds to the speed of the propagation of the maximum of an optical pulse travelling into the medium. This remains true whether the dispersion in the medium is normal (/sup dn//d/spl nu/>0) or anomalous (/sup dn//d/spl nu/<0). It has been demonstrated that coherently prepared atomic systems can exhibit steep dispersion leading to small absolute values of the group velocity (slow light). In recent work, we have demonstrated that narrow resonances arising from the coherent interaction of two optical fields with a closed atomic transition between two degenerate levels may correspond to a steep anomalous dispersion and thus to slow and negative group velocity. We report on the experimental study of the propagation of an amplitude modulated wave in a medium presenting negative group velocity.
Recently,there has been interest in modifying the group velocity of optical pulses,resulting in stopped,slow,and fast(superluminal)light.According to the physical theory,fast appears in the anomalous medium,and then it so called light medium.There are many experimeuts to produce fast light,this situation opens up new perspectives for the so called dispersion engineering.For example,signal propagating with a group velocity that exceeds the speed of light in vacuum(c) is intriguing for scientists.And then,the traveling of short wave pulses,microwave pulses and light pulses with group velocity vg,whose values exceed infinity,so called negative group velocity(NGV) propagation.Such circumstance occurs when the peak of a pulse traveling through DUT,exits before the peak of the input pulse has reached the beginning of DUT.This effect is counterintuitive,but it is a discover under the experimental basis.When the group velocity of light in a material is negative,it is the NGV medium. Although NGV are possible particularly in gain systems,there have been some experimental demonstrations of that phenomenon in passive systems,such as the coaxial cables,waveguides,micro-strip lines,and optical fibers,etc.If the experimental configuration used with a higher impedance mismatch,then it permits larger group delays,and a corresponding NGV.If n is the effective refraction index of the medium,we wantfn |f/ndn/df|1 to obtain the NGV. Many experiments showed the group velocity can surpass the light speed c,but scientists still lack the further understanding of the results.In 2001,Scientists obtained the formula v-e=|T|2vg,where v-e is average energy velocity,T is transmission coeficient of the system.If we want v-ec,the condition is vgc|T|-2.Hence it can be concluded that only vg/c is very large,the energy velocity can surpass c.This demonstration opens the door to interesting possibilities. The definition of signal velocity by Brillouin,mathemalical meaning exceeds physical meaning.We argue that undistorted wave group(wave packet) propagation are the first consideration.According to this viewpoint,the theoretical analysis show that superluminal propagation(i.e.superluminal communication) was observed by authors of many NGV researchers.……The superluminal group velocity wave propagation,the negative group velocity wave propagation——each of the two cases has its own use.Now,scientists do research works in these fields: such as optical communication,squeezed light and quantum entanglement.The condusion tell us that,a hight efficiency and low-loss fast light scheme may explore potential applications.