Successive cancellation (SC) decoding of polar codes may bring about error propagation that needs to be mitigated. In this paper, we present a new SC Flipping (SCFlip) decoder, named bit error rate (BER) evaluation based SCFlip (BER-SCFlip), which can accurately target the first error bit and correct it with a high probability. Thus, a high error correction capability and a low decoding complexity can be achieved. First, we propose a new criterion to find out the most suspicious error bit. Those non-frozen bits that have higher decoding BERs derived from log-likelihood-ratios (LLRs) after SC decoding than the corresponding expected ones estimated via Gaussian Approximation (GA), are collected into the flip-bits set. These candidate bits will be flipped one by one according to their SC decoding orderings in extra decoding attempts until the decoded codeword passes cyclic redundancy check (CRC) or a predetermined maximum number of extra attempts is reached. We then propose an extended version of BER-SCFlip, named BER-SCFlip-w with the capability to correct up to w error bits in each extra decoding attempt. By combining our criterion for the flip-bits selection with that of Dynamic SCFlip (D-SCFlip), the proposed BER-SCFlip-w significantly reduces decoding complexity and latency while maintaining the superior error-correction performance close to that of D-SCFlip-w. The simulation results show that the proposed schemes are competitive among existing SCFlip algorithms and could achieve the error-correction performance approaching that of CRC-aided SCL decoding under list size L = 16 while maintaining low complexity.
Successive cancellation (SC) decoding of polar codes may bring about error propagation that needs to be mitigated. In this paper, we present a new SC Flipping (SCFlip) decoder, named bit error rate (BER) evaluation based SCFlip (BER-SCFlip), which can accurately target the first error bit and correct it with a high probability. Thus, a high error correction capability and a low decoding complexity can be achieved. First, we propose a new criterion to find out the most suspicious error bit. Those non-frozen bits that have higher decoding BERs derived from log-likelihood-ratios (LLRs) after SC decoding than the corresponding expected ones estimated via Gaussian Approximation (GA), are collected into the flip-bits set. These candidate bits will be flipped one by one according to their SC decoding orderings in extra decoding attempts until the decoded codeword passes cyclic redundancy check (CRC) or a predetermined maximum number of extra attempts is reached. We then propose an extended version of BER-SCFlip, named BER-SCFlip-w with the capability to correct up to w error bits in each extra decoding attempt. By combining our criterion for the flip-bits selection with that of Dynamic SCFlip (D-SCFlip), the proposed BER-SCFlip-w significantly reduces decoding complexity and latency while maintaining the superior error-correction performance close to that of D-SCFlip-w. The simulation results show that the proposed schemes are competitive among existing SCFlip algorithms and could achieve the error-correction performance approaching that of CRC-aided SCL decoding under list size L = 16 while maintaining low complexity.
This paper proposes a generalization of the recently introduced successive cancellation flip (SCFlip) decoding of polar codes, characterized by a number of extra decoding attempts, where one or several positions are flipped from the standard SC decoding. To make such an approach effective, we first introduce the concept of higher order bit flips and propose a new metric to determine the bit flips that are more likely to correct the trajectory of the SC decoding. We then propose a generalized SCFlip decoding algorithm, referred to as dynamic-SCFlip (D-SCFlip), which dynamically builds a list of candidate bit flips, while guaranteeing that the next attempt has the highest probability of success among the remaining ones. Simulation results show that D-SCFlip is an effective alternative to SC-list decoding of polar codes, by providing very good error correcting performance, with an average computation complexity close to the one of the SC decoder.
This paper proposes a generalization of the recently introduced Successive Cancellation Flip (SCFlip) decoding of polar codes, characterized by a number of extra decoding attempts, where one or several positions are flipped from the standard Successive Cancellation (SC) decoding. To make such an approach effective, we first introduce the concept of higher-order bit-flips, and propose a new metric to determine the bit-flips that are more likely to correct the trajectory of the SC decoding. We then propose a generalized SCFlip decoding algorithm, referred to as Dynamic-SCFlip (D-SCFlip), which dynamically builds a list of candidate bit-flips, while guaranteeing that extra decoding attempts are performed by decreasing probability of success. Simulation results show that D-SCFlip is an effective alternative to SC-List decoding of polar codes, by providing very good error correcting performance, with an average computation complexity close to the one of the SC decoder.
A successive cancellation list (SCL) decoder with the assistance of a cyclic redundancy check (CRC) can provide competitive decoding performance for polar codes compared with the state-of-the-art codes. In this paper, we adopt a bit-flip algorithm for the CRC-assisted SCL decoder to further improve the error-correcting performance. We first introduce a new bit-flip criterion for the SCL decoder. To support this criterion, we give the metric to identify the positions that need to be flipped. To verify the superiority of the proposed bit-flip criterion, we also consider a kind of SCL-flip decoder whose criterion is very similar with the existing one and we will prove that its performance is worse than the decoder with the proposed bit-flip criterion. The simulation results show that the decoder with the proposed bit-flip criterion outperforms both the standard CRC-assisted SCL decoder and the existing SCL-based bit-flip decoder.
Polar codes have garnered significant attention since they were proposed due to their capacity-achieving properties and their low-complexity decoding process, and they were selected as the coding scheme for the control channel in 5G mobile communication technology. A successive cancellation list (SCL) decoder, aided by a cyclic redundancy check (CRC), performs the competitive error correcting performance for polar codes compared to other sophisticated codes. The SCL-Flip decoding algorithm is proposed to enhance the error correction performance of the SCL. However, the SCL-Flip is hampered by a high decoding complexity due to the necessary selection and sorting process of path metrics (PMs). Additionally, it requires a large number of iterations to achieve a good error correction performance. In this paper, we propose the error segment bit-flip (ES-SCL-Flip) decoding algorithm, a simplified bit-flip approach for the SCL decoder based on analyzing the distributions of the first error bit. Firstly, we construct an index set with a high probability of the first erroneous bit. Second, a bit-flip criterion is introduced to prevent the costly operation of the PM selection and sorting without compromising the error correction performance. Finally, a search strategy is employed that utilizes segmented error indication to target and rectify the initial error segment sequentially. The simulation results demonstrate that the ES-SCL-Flip decoder provides an improved error correction performance with only a minimal increase in decoding complexity compared to the conventional CRC-aided SCL decoder. This algorithm attains a commendable equilibrium between the error correction performance and decoding complexity.
Dynamic successive cancellation flip (D-SCFlip) decoding has emerged as a low-complexity alternative to successive cancellation list (SCL) decoding for polar codes, bridging the performance gap between conventional successive cancellation (SC) and SCL decoding. While D-SCFlip enhances SC decoding with adaptive bit-flip capabilities, its practical efficiency remains constrained by several factors, including the rapid growth of the search space with code dimension, lack of spatial error localization, and uniform resource allocation for correcting bit error decisions. This work presents a complexity-constrained D-SCFlip decoding algorithm that leverages segmented cyclic redundancy check (CRC) as a tool for fine-grained complexity budgeting, enabling dynamic allocation of fixed computational resources based on localized error information. First, we adapt the segmented CRC approach to the D-SCFlip context, replacing the global CRC with localized checks across optimally sized segments to constrain the flip search space to specific error regions. Second, we introduce a computational complexity budgeting mechanism that efficiently allocates decoding resources across segments based on their error susceptibility and correction potential. Our contribution also includes rigorous optimization of segment configuration specifically designed for complexity-constrained decoding. Simulation results demonstrate that our approach achieves better block error rate performance compared to conventional D-SCFlip decoding under equivalent worst-case complexity constraints, with gains of 0.05-0.14 dB across various code rates and lengths.
Although original successive cancellation flip (SCF) decoding of the polar codes can identify the first error position and flip the error, decoding still fails when other errors occur after the corrected error bit. Therefore, the improvement of the block error rate (BLER) performance is limited. In this paper, we present an improved algorithm that can correct multiple error bits, named as improved multiple bit-flipping successive cancellation decoding algorithm. First, multiple sets are constructed by calculating the log likelihood ratio (LLR) of each information bit. Then, a bit is selected and corrected from the first set when original decoding fails; two bits are selected and flipped from the second set when all bits in the first set cannot be successfully decoded; when all bits combinations in the second set are flipped but the output vector still does not match the input vector, three bits are selected and corrected from the third set. Simulation results show that the BLER performance of the improved algorithm is better than that of the successive cancellation list decoding (SCL) decoding algorithm with a list size of L = 8 for N = 256. When N = 1024 and SNR = 3 dB, the BLER performance of improved algorithm is slightly better than that of SCL decoding algorithm with a list size of L = 4.