International Symposium on Communications and Information Technologies

A Decomposition Mapping based Quantized Belief Propagation Decoding for 5G LDPC Codes

Hangxuan Cui, Khoa Le, Fakhreddine Ghaffari, David Declercq, Jun Ting Lin, Zhongfeng Wang

Published Sep 1, 2019• 0 citations

Abstract

Since the degree-1 variable nodes (VNs) in the low-density parity-check (LDPC) codes for the 5th generation (5G) mobile communications are very sensitive to be erroneous, the quantized min-sum (QMS) and offset min-sum (QOMS) decodings suffer from poor error-correction performance due to the imprecise estimation of the check-to-variable (C2V) message magnitudes. For this reason, this paper proposes a decomposition mapping based quantized belief propagation (DM-QBP) decoding for 5G LDPC codes. In order to reduce the computation complexity, the check node (CN) update function is realized by look-up tables (LUTs). Furthermore, a decomposition method is presented to eliminate the high memory cost of using large tables without performance loss. Therefore, the CN update function can be implemented based only on simple mappings and fixed-point additions. Simulation results show that, the DM-QBP decoder considerably outperforms the state-of-the-art ones for several 5G LDPC codes. With a small number of quantization bits, its performance is even better than the floating-point OMS decoding in some cases.

DOI: 10.1109/iscit.2019.8905133

Related papers

An Adaptation of Min-Sum Decoder for 5G Low-Density Parity-Check Codes

Khoa Le, Fakhreddine Ghaffari, David Declercq

This paper presents an adaptation of the Min-Sum decoders for the Low-Density Parity-Check (LDPC) used in the enhanced mobile broadband (eMBB) scenario in the 5th generation mobile networks (5G). Starting from the structure of the proposed LDPC codes for 5G where a significant part of the Variable Nodes (VNs) is with degree-1 and is sensitively to be erroneous in the traditional Offset Min-Sum decoder, we adapt the Min-Sum decoding principle to decode these 5G LDPC codes, targeting to improve the error correction performance. The proposed decoder, named Adapted Min-Sum (AMS), processes the core and the extension parts of the code differently using different offset factors. By doing that, the error probability of degree-1 VN is significantly depressed. We show through the simulation performance that the proposed decoder, with small number of quantization bits, can even surpass the floating-point counterpart and approaches the performance of the Sum-Product decoder for several 5G LDPC code lengths and code rates, with negligible additional complexity.

IEEE International Symposium on Circuits and Systems proceedingsMay 1, 201922 citations

Generalized Mutual Information-Maximizing Quantized Decoding of LDPC Codes.

Peng Kang, Kui Cai, Xuan He +1 more

In this paper, we propose a general framework of the mutual infomration-maximizing (MIM) quantized decoding for low-density parity-check (LDPC) codes, which can outperform the state-of-the-art lookup table (LUT) decoder by using simple mappings and fixed-point additions for the node updates. Our decoding method is generic in the sense that it can be applied to LDPC codes with arbitrary degree distributions, and it can be implemented based on either the belief propagation (BP) algorithm or the min-sum (MS) algorithm, leading to the MIM quantized BP (MIM-QBP) decoder and the MIM quantized MS (MIM-QMS) decoder, respectively. In particular, we approximate the check node (CN) update of the MIM-QBP decoder by a max-product operation and obtain the MIM-QMS decoder, which simplifies the decoder design and requires less resource consumption. To avoid the precision degradation, we introduce a dynamic reconstruction method to optimize the variable node update for different iterations. Some practical aspects of the proposed decoders such as the design and decoding complexity are also discussed. Simulation results show that the MIM-QBP decoder outperforms the LUT decoders in the waterfall region with both 3-bit and 4-bit precision. Moreover, the 4-bit MIM-QMS decoder can even surpass the floating-point BP decoder in the error-floor region.

Nov 26, 20201 citation

On Mutual Information-Maximizing Quantized Belief Propagation Decoding of LDPC Codes

Xuan He, Kui Cai, Zhen Mei

A severe problem for mutual information-maximizing lookup table (MIM-LUT) decoding of low-density parity-check (LDPC) code is the high memory cost for using large tables, while decomposing large tables to small tables deteriorates decoding error performance. In this paper, we propose a systematic method, called mutual information- maximizing quantized belief propagation (MIM-QBP) decoding, to remove the lookup tables used for MIM-LUT decoding. Our method leads to a very practical decoder, namely the MIM-QBP decoder, which can be implemented based only on simple mappings and additions. Simulation results show that the proposed MIM-QBP decoder can outperform the state-of-the-art MIM-LUT decoder. Moreover, the MIM-QBP decoder with only 3 bits per message can outperform the floating-point belief propagation (BP) decoder at high signal-to-noise ratio (SNR) regions with a maximum of 10 iterations.

GlobecomDec 1, 201925 citations

An Enhanced Offset Min-Sum decoder for 5G LDPC Codes

Hangxuan Cui, Khoa Le, Fakhreddine Ghaffari +3 more

This paper presents an Enhanced Offset Min-Sum (EOMS) decoder for Low-Density Parity-Check (LDPC) codes used in the 5th generation (5G) mobile communications. It is observed that a significant part of Variable Nodes (VNs) in the 5G LDPC codes are with degree-1 and are very sensitive to be erroneous, leading to the fact that the decoding performance is generally reduced. In the EOMS decoding, the core check nodes (CN) and extension CNs are processed with different update rules. A new CN -update criterion is also proposed by making use of the third minimum value. As a result, the offset factors are adaptively selected and the error probability of degree-1 VNs is significantly reduced. Simulation results show that the proposed EOMS decoder offers a much better error-correction performance than the state-of-the-art benchmarks for several 5G LDPC codes with a negligible complexity overhead.

Asia-Pacific Conference on Communications (APCC)Nov 1, 20191 citation

High-Performance and Low-Complexity Decoding Algorithms for 5G Low-Density Parity-Check Codes

Bich Ngoc Tran-Thi, Truong Nguyen, Trang Hoang

The development of the Fifth Generation (5G) New Radio (NR) provides several significant advantages when compared to the fourth generation (4G) Long Term Evolution (LTE) in mobile communications. Due to the outstanding characteristics of Low-Density Parity-Check (LDPC) codes such as high decoding performance, high throughput, low complexity, they have been accepted as the standard codes for the 5G NR. In this paper, we propose two LDPC decoding algorithms: Hybrid Offset Min-Sum (HOMS) and Variable Offset Min-Sum (VOMS), which are aimed at improving the error correction performance. The main idea of the HOMS/VOMS algorithm is to apply modified factors to both variable-nodes and check-nodes updated processing in order to compensate the extrinsic messages overestimation of the MS-based algorithms and increase the protection ability for degree-1 variable-nodes. The simulation results show that at the Bit-Error-Rate (BER) of 10-5, the proposed HOMS/VOMS algorithm achieves the decoding gain up to 0.2 dB compared to the Offset Min-Sum (OMS) algorithm, with a slight increase in decoding complexity.

Journal of CommunicationsJan 1, 20223 citations

A Reconstruction-Computation-Quantization (RCQ) Approach to Node Operations in LDPC Decoding

Linfang Wang, Richard D. Wesel, Maximilian Stark +1 more

This paper proposes a finite-precision decoding method for low-density parity-check (LDPC) codes that features the three steps of Reconstruction, Computation, and Quantization (RCQ). Unlike Mutual-Information-Maximization Quantized Belief Propagation (MIM-QBP), RCQ can approximate either belief propagation or Min-Sum decoding. MIM-QBP decoders do not work well when the fraction of degree-2 variable nodes is large. However, sometimes a large fraction of degree-2 variable nodes is used to facilitate a fast encoding structure, as seen in the IEEE 802.11 standard and the DVB-S2 standard. In contrast to MIM-QBP, the proposed RCQ decoder may be applied to any off-the-shelf LDPC code, including those with a large fraction of degree-2 variable nodes. Simulations show that a 4-bit Min-Sum RCQ decoder delivers frame error rate (FER) performance within 0.1 dB of floating point belief propagation (BP) for the IEEE 802.11 standard LDPC code in the low SNR region. The RCQ decoder actually outperforms floating point BP and Min-Sum in the high SNR region were FER less than 10-5. This paper also introduces Hierarchical Dynamic Quantization (HDQ) to design the time-varying non-uniform quantizers required by RCQ decoders. HDQ is a low-complexity design technique that is slightly sub-optimal. Simulation results comparing HDQ and optimal quantization on the symmetric binary-input memoryless additive white Gaussian noise channel show a mutual information loss of less than 10-6bits, which is negligible in practice.

arXiv:2005.07259GlobecomDec 1, 202011 citations