In this project we studied a simplified potential from [1] describing nuclear physics from quark and gluon fields, where spatial degrees of freedom have been integrated over. This potential deals with the phase structure of the strong interaction. We created a matrix representation of the Hamiltonian for this theory using discrete quantum mechanics [2]. We then feed this Hamiltonian to IBM's Qiskit package [3]. We run on IBM's 32-qubit quantum simulator, which approximates the ground state energy using the variational quantum eigensolver (VQE) algorithm [4]. This result is then compared with the exact ground state energy, which we can calculate classically since the matrices we use are still small enough. The bosonic Hamiltonian for a 6-qubit representation took over 1000 Pauli factors to represent fully. To improve our performance, we can look for a more efficient representation of this model's Hamiltonian. We will develop a better variational trial wave function and initial state, as well as include the effect of fermions and heavy quarks on the potential.
In this project we studied a simplified potential from [1] describing nuclear physics from quark and gluon fields, where spatial degrees of freedom have been integrated over. This potential deals with the phase structure of the strong interaction. We created a matrix representation of the Hamiltonian for this theory using discrete quantum mechanics [2]. We then feed this Hamiltonian to IBM's Qiskit package [3]. We run on IBM's 32-qubit quantum simulator, which approximates the ground state energy using the variational quantum eigensolver (VQE) algorithm [4]. This result is then compared with the exact ground state energy, which we can calculate classically since the matrices we use are still small enough. The bosonic Hamiltonian for a 6-qubit representation took over 1000 Pauli factors to represent fully. To improve our performance, we can look for a more efficient representation of this model's Hamiltonian. We will develop a better variational trial wave function and initial state, as well as include the effect of fermions and heavy quarks on the potential.
Quantum computers have the potential to transform the ways in which we tackle some important problems. The efforts by companies like Google, IBM and Microsoft to construct quantum computers have been making headlines for years. Equally important is the challenge of translating problems into a state that can be fed to these machines. Because quantum computers are in essence controllable quantum systems, the problems that most naturally map to them are those of quantum mechanics. Quantum chemistry has seen particular success in the form of the variational quantum eigensolver (VQE) algorithm, which is used to determine the ground state energy of molecular systems. The goal of our work has been to use the matrix formulation of quantum mechanics to translate other systems so that they can be run through this same algorithm. We describe two ways of accomplishing this using a position basis approach and a Gaussian basis approach. We use this translation to compute finite temperature quantities such as the average energy as a function of temperature. We do this by constructing a 0+1 dimensional thermal field theory, constructing a thermal double of the system and using tensor products to construct operators in the system coupled to a heat bath. We also discuss how to include a chemical potential in the quantum computations. We then connect the 0+1 formalism to gauge theory by using an effective matrix model description used in nuclear theory. We study effective potentials for components of the gauge field and use the VQE algorithm to calculate the ground state energies. We also visualize the wave functions from the eigensolver and make comparisons to theoretical results obtained with continuous operators.
Background: Quantum simulations offer the potential to predict the structure and dynamics of nuclear many-body systems that are beyond the capabilities of classical computing. Generally, preparing the ground state of strongly interacting many-body systems relevant to nuclear physics is, however, inefficient, even using ideal quantum computers. In addition, currently available noisy intermediate-scale quantum (NISQ) era quantum devices possess modest numbers of qubits, limiting the size of quantum many-body systems that can be simulated. In this context, a reformulation of the quantum many-body problems using truncated model spaces and Hamiltonians is desirable to make them more amenable to near-term quantum computers. The importance of symmetries in low-energy theories, including effective field theories (EFTs), lattice quantum chromodynamics (QCD), and effective model spaces for nuclear systems, in particular their interplay with the reduction of active Hilbert spaces, is well known. Lesser known is the fact that the noncommutivity of some symmetries and truncations of the model space can be profitably combined with variational calculations to rearrange the entanglement into localized structures and enable more efficient simulations.Purpose: The goal of the present study is to explore and utilize the noncommutivity of symmetries and model-space truncations of quantum many-body systems important to nuclear physics, particularly in combination with variational algorithms for quantum simulations and effective Hamiltonian learning.Method: We introduce an iterative hybrid classical-quantum algorithm, the Hamiltonian learning variational quantum eigensolver (HL-VQE), that simultaneously optimizes an effective Hamiltonian, thereby rearranging entanglement into the effective model space, and the associated ground-state wave function. Quantum simulations, using classical computers and IBM's superconducting-qubit quantum computers, are performed to demonstrate the HL-VQE algorithm, in the context of the Lipkin-Meshkov-Glick (LMG) model of interacting fermions, where the Hamiltonian transformation corresponds to an orbital rotation. We use a mapping where the number of qubits scales with the logarithm of the size of the effective model space, rather than the particle number.Results: HL-VQE is found to provide an exponential improvement in LMG-model calculations of the ground-state energy and wave function, compared to naive truncations without Hamiltonian learning, throughout a significant fraction of the Hilbert space. In the context of EFT, this corresponds to counterterms scaling exponentially with the cutoff as opposed to power law. Implementations on IBM's QExperience quantum computers and simulators for one- and two-qubit effective model spaces are shown to provide accurate and precise results, reproducing classical predictions.Conclusions: For a range of parameters defining the LMG model, the HL-VQE algorithm is found to have better scaling of quantum resources requirements than previously explored algorithms. In particular, the HL-VQE scales efficiently over a large fraction of the model space, in contrast to VQE alone. This work constitutes a step in the development of entanglement-driven quantum algorithms for descriptions of nuclear many-body systems. This, in part, leverages the potential of noisy intermediate-scale quantum (NISQ) devices. The exponential scaling of counterterms observed in this study suggests the possibility of more general applicability to other nonperturbative EFTs.
In this work, we compare three qubit-mapping strategies to study the structure of the nuclear ground state within the shell model description employing the Variational Quantum Eigensolver (VQE) approach. Although the initial point for different mappings is a Hamiltonian matrix in many-body particle basis or Slater determinant (SD) basis, the structure of the trial wavefunction and resource counts are different for each mapping. These three mappings are tested for a mid p-shell nucleus 10B and compared the quantum resources required to find the ground state for each mapping. Further, we extend the qubit-efficient mapping to study the ground state of one more mid p-shell nucleus 12C. We run circuits up to 26-qubits representing their ground states on a noisy simulator (IBM's FakeFez backend) and quantum hardware (ibm_fez). The best post-error mitigated results from the hardware for 10B ground state is obtained following SD to qubit mapping with a percent error of 0.21 \%. The percent errors for the same state following cSD and pnSD mapping are 3.37 and 8.88 \%, respectively. On the other hand, following the cSD mapping, the post-error mitigated ground state energy of 12C is 6.82 \% away from the exact result. We further evaluate the fidelity of the VQE wavefunctions obtained from hardware with respect to the shell model wavefunctions for the cSD mapping. This cSD mapping can be useful for scaling the VQE algorithm for complex nuclei across different mass regions in terms of qubit efficiency.
Nuclear lattice effective field theory has become an important framework for quantum many-body calculations in nuclear physics, yet its classical implementation remains increasingly challenging for more general interactions and larger systems. In this work, we develop a quantum-computing framework for a three-dimensional nuclear lattice model. We construct a variational quantum eigensolver framework and systematically compare the Jordan-Wigner and Gray code encodings. Our analysis shows that for the few-body systems considered here, Gray code combined with symmetry reduction yields a substantially more compact qubit representation. Based on this framework, we perform numerical studies for 2H, 3H, and 4He on finite lattices. The calculated ground-state energies exhibit a clear approach toward the corresponding experimental binding energies as the lattice size increases. These results provide a proof-of-principle foundation for future quantum simulations of nuclear many-body problems.
In this project we develop a quantum algorithm to realize finite temperature simulation on a quantum computer. As quantum computers use real-time evolution we did not use the imaginary time methods popular on classical algorithms. Instead, we implemented a real-time therom field dynamics formalism, which has the added benefit of being able to compute quantities that are both time-and temperature-dependent. To implement thermo field dynamics we apply a unitary transformation [1] to discrete quantum mechanical operators to make new Hamiltoni-ans with encoded temperature dependence. The method works normally for fermions, which have a finite representation, but needs some modification to work with bosons. These Hamilto-nians are then processed into a Pauli matrix representation in order to be used as input for IBM's Qiskit package [2]. We then use IBM's quantum simulator to calculate an approximation to the Hamiltonaian's ground state energy via the variational quantum eigensolver (VQE) algorithm [3]. This approximation is then compared to a classically calculated value for the exact energy. The thermo field dynamics quantum algorithm has general applications to material science, high-energy physics and nuclear physics, particularly in those situations involving realtime evolution at high temperature.
Abstract The nuclear binding energy problem is one of the fundamental challenges of the nuclear many-body problem, as calculating the corresponding binding energies by various approximate methods remains computationally challenging for a wide range of nuclei. In this work, a binding energy model derived from quantum computational approaches to nuclear physics is proposed and implemented in a quantum computer simulator to address the nuclear binding energy problem. The goal is to develop a framework capable of calculating the binding energies of multiple nuclei within a unified scheme. To this end, appropriate potential expressions are selected and tuned to accommodate varying nuclear properties. The defined Hamiltonian is parameterized and transformed into a form suitable for implementation on a quantum computer. Depending on the number of nucleons, the program is run on 2 to 12 qubits to obtain the minimum eigenvalue of the Hamiltonian corresponding to the ground state energy (binding energy of the nucleus) according to the variational principle of quantum mechanics. This framework provides, the binding energies of the first 29 nuclei with a total deviation of 16.86% ( 2 H, 3 H, 3 He, 4 He, 6 He, 8 He, 6 Li, 7 Li, 8 Li, 9 Li, 11 Li, 7 Be, 8 Be, 9 Be, 10 Be, 11 Be, 12 Be, 8 B, 9 B, 10 B, 11 B, 12 B, 9 C, 10 C, 11 C, 12 C, 11 N, 12 N, 12 O) obtained by quantum computation following the steps of Variational Quantum Eigensolver (VQE). These results support the feasibility of the proposed approach for nuclear binding energy calculations. In this sense, this work contributes to quantum computing and nuclear physics by providing a model able to calculate the binding energies for the first 29 nuclei using quantum computer simulator and offers a promising route for future large-scale applications.