Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

A simple method for in situ measurement of vacuum window birefringence

W. H. Yuan, Hongli Liu, W. Z. Wei, Z. Y. Ma, P. Hao, Zhiying Deng, Ke Deng, Jie Zhang, Z. H. Lu

Published Nov 1, 2019• 3 citations
Publisher

Abstract

We present a simple method to measure the degrees of circular polarization (DoCP) of laser light inside a vacuum chamber and the birefringence of a vacuum window by detecting the fluorescence emitted by Doppler cooled ions in an ion trap. Imperfect laser polarization will cause ions to be pumped to the dark state which will decrease the fluorescence rates of the ions. With a simulation based on the rate equations of the relevant energy levels of 25Mg+ ions, we find that the fluorescence rate is sensitive to the DoCP of the laser. Based on the simulation result, we present a new method to optimize the DoCP of the laser inside the vacuum chamber by adjusting fast axis azimuthal angles of a half-wave plate and a quarter-wave plate outside the vacuum chamber. The laser light is optimized to be circularly polarized with an uncertainty of the DoCP of 7.8 × 10−5. With the obtained polarization information on both sides of the vacuum window and treating the vacuum window as an unknown wave plate, the phase delay and the fast axis azimuthal angle of the vacuum window can be determined in the form of Mueller matrix. The phase delay is determined to be 197.60(39)°, and the fast axis azimuthal angle is determined to be 104.00(5)°.

DOI
10.1063/1.5121568

Related papers

In Situ Measurement of Vacuum Window Birefringence using 25Mg+ Fluorescence

W. H. Yuan, Hongli Liu, Wenyu Wei +6 more

Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.

Journal of Visualized Experiments•Jun 13, 2020•0 citations

Note: In situ measurement of vacuum window birefringence by atomic spectroscopy

Andreas Steffen, Wolfgang Alt, Maximilian Genske +3 more

We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.

arXiv:1308.4959•Review of Scientific Instruments•Dec 1, 2013•21 citations

Circular dichroism in the polarization of the fluorescence resulting from the decay of photoionized Ca atoms

John B. West, Kiyoshi Ueda, N M Kabachnik +3 more

Circular dichroism has been detected in the polarization of the fluorescence resulting from the decay of excited calcium ions. Synchrotron radiation was used to both ionize and excite calcium atoms from their ground state, and the photoejected electron was detected in coincidence with the polarized fluorescent photon. By introducing a degree of left, then right circularly polarized light into the incident photon beam the circular dichroism could be measured. The analysis of the results was carried out using recent developments of the statistical tensor method, and it was possible to determine the sign of the phase difference between the outgoing waves.

Physical Review A•Jan 1, 1996•21 citations

Superelastic scattering with imperfect laser polarization

Robert E Scholten, V. Karaganov, P. J. O. Teubner +1 more

The formalism applied to superelastic electron scattering from laser-excited atoms has to date assumed perfect polarization of the laser light. We consider the effects of imperfect polarization, deriving an expression for the superelastic scattering rate from target atoms optically pumped with elliptically polarized light, and show how imperfect polarization effects can be measured and minimized under experimental conditions. In particular, we find that in measuring the scattering for linearly polarized light with a small circular component, the errors are proportional to the undesired circular polarization component and to ${P}_{3}$, the scattering sensitivity to circular light. We also present in detail a polarizer design which generates both linear and circular polarizations, allowing measurement of all scattering polarization sensitivities without requiring interchange of optical elements.

Physical Review A•Jul 1, 1999•3 citations

Laser polarization and phase control of up-conversion fluorescence in rare-earth ions

Yunhua Yao, Shian Zhang, Hui Zhang +4 more

We theoretically and experimentally demonstrate the up-conversion fluorescence control via resonance-mediated two-photon absorption in rare-earth ions by varying both the laser polarization and phase. We show that both the laser polarization and phase can control the up-conversion fluorescence, and the up-conversion fluorescence intensity is decreased when the laser polarization changes from linear through elliptical to circular. We also show that the laser polarization will affect the control efficiency of the up-conversion fluorescence by varying the laser phase, and the circular polarization will reduce the control efficiency. Furthermore, we suggest that the control efficiency by varying the laser polarization and the effect of the laser polarization on the control efficiency by varying the laser phase can be artificially manipulated by controlling the laser spectral bandwidth. This optical control method opens a new opportunity to control the up-conversion fluorescence of rare-earth ions, which may have significant impact on the related applications of rare-earth ions.

Scientific Reports•Dec 3, 2014•21 citations

Laser-induced rotation and cooling of a trapped microgyroscope in vacuum

Yoshihiko Arita, Michaël Mazilu, Kishan Dholakia

Quantum state preparation of mesoscopic objects is a powerful playground for the elucidation of many physical principles. The field of cavity optomechanics aims to create these states through laser cooling and by minimizing state decoherence. Here we demonstrate simultaneous optical trapping and rotation of a birefringent microparticle in vacuum using a circularly polarized trapping laser beam--a microgyroscope. We show stable rotation rates up to 5 MHz. Coupling between the rotational and translational degrees of freedom of the trapped microgyroscope leads to the observation of positional stabilization in effect cooling the particle to 40 K. We attribute this cooling to the interaction between the gyroscopic directional stabilization and the optical trapping field.

Nature Communications•Aug 28, 2013•323 citations
We present a simple method to measure the degrees of circular polarization (DoCP) of laser light inside a vacuum chamber and the birefringence of a vacuum window by detecting the fluorescence emitted by Doppler cooled ions in an ion trap. Imperfect laser polarization will cause ions to be pumped to the dark state which will decrease the fluorescence rates of the ions. With a simulation based on the rate equations of the relevant energy levels of 25Mg+ ions, we find that the fluorescence rate is sensitive to the DoCP of the laser. Based on the simulation result, we present a new method to optimize the DoCP of the laser inside the vacuum chamber by adjusting fast axis azimuthal angles of a half-wave plate and a quarter-wave plate outside the vacuum chamber. The laser light is optimized to be circularly polarized with an uncertainty of the DoCP of 7.8 × 10−5. With the obtained polarization information on both sides of the vacuum window and treating the vacuum window as an unknown wave plate, the phase delay and the fast axis azimuthal angle of the vacuum window can be determined in the form of Mueller matrix. The phase delay is determined to be 197.60(39)°, and the fast axis azimuthal angle is determined to be 104.00(5)°.
Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of 25Mg+ ions induced by laser light that is resonant with the transition of |32P3/2,F = 4, mF = 4 → |32S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of 25Mg+ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.
We present an in situ method to measure the birefringence of a single vacuum window by means of microwave spectroscopy on an ensemble of cold atoms. Stress-induced birefringence can cause an ellipticity in the polarization of an initially linearly polarized laser beam. The amount of ellipticity can be reconstructed by measuring the differential vector light shift of an atomic hyperfine transition. Measuring the ellipticity as a function of the linear polarization angle allows us to infer the amount of birefringence Δn at the level of 10(-8) and identify the orientation of the optical axes. The key benefit of this method is the ability to separately characterize each vacuum window, allowing the birefringence to be precisely compensated in existing vacuum apparatuses.
Circular dichroism has been detected in the polarization of the fluorescence resulting from the decay of excited calcium ions. Synchrotron radiation was used to both ionize and excite calcium atoms from their ground state, and the photoejected electron was detected in coincidence with the polarized fluorescent photon. By introducing a degree of left, then right circularly polarized light into the incident photon beam the circular dichroism could be measured. The analysis of the results was carried out using recent developments of the statistical tensor method, and it was possible to determine the sign of the phase difference between the outgoing waves.
The formalism applied to superelastic electron scattering from laser-excited atoms has to date assumed perfect polarization of the laser light. We consider the effects of imperfect polarization, deriving an expression for the superelastic scattering rate from target atoms optically pumped with elliptically polarized light, and show how imperfect polarization effects can be measured and minimized under experimental conditions. In particular, we find that in measuring the scattering for linearly polarized light with a small circular component, the errors are proportional to the undesired circular polarization component and to P3{P}_{3}P3​, the scattering sensitivity to circular light. We also present in detail a polarizer design which generates both linear and circular polarizations, allowing measurement of all scattering polarization sensitivities without requiring interchange of optical elements.
We theoretically and experimentally demonstrate the up-conversion fluorescence control via resonance-mediated two-photon absorption in rare-earth ions by varying both the laser polarization and phase. We show that both the laser polarization and phase can control the up-conversion fluorescence, and the up-conversion fluorescence intensity is decreased when the laser polarization changes from linear through elliptical to circular. We also show that the laser polarization will affect the control efficiency of the up-conversion fluorescence by varying the laser phase, and the circular polarization will reduce the control efficiency. Furthermore, we suggest that the control efficiency by varying the laser polarization and the effect of the laser polarization on the control efficiency by varying the laser phase can be artificially manipulated by controlling the laser spectral bandwidth. This optical control method opens a new opportunity to control the up-conversion fluorescence of rare-earth ions, which may have significant impact on the related applications of rare-earth ions.
Quantum state preparation of mesoscopic objects is a powerful playground for the elucidation of many physical principles. The field of cavity optomechanics aims to create these states through laser cooling and by minimizing state decoherence. Here we demonstrate simultaneous optical trapping and rotation of a birefringent microparticle in vacuum using a circularly polarized trapping laser beam--a microgyroscope. We show stable rotation rates up to 5 MHz. Coupling between the rotational and translational degrees of freedom of the trapped microgyroscope leads to the observation of positional stabilization in effect cooling the particle to 40 K. We attribute this cooling to the interaction between the gyroscopic directional stabilization and the optical trapping field.