We study very generally towhat extent the uncertainty with which a phase shift can be estimated in quantum metrology can be reduced by extending the Hamiltonian that generates the phase shift to an ancilla system with a Hilbert space of arbitrary dimension, and allowing arbitrary interactions between the original system and the ancilla. Such Hamiltonian extensions provide a general framework for open quantum systems, as well as for “non-linear metrology schemes” that have been investigated over the last few years. We prove that such Hamiltonian extensions cannot improve the sensitivity of the phase shift measurement when considering the quantum Fisher information optimized over input states.
We study very generally towhat extent the uncertainty with which a phase shift can be estimated in quantum metrology can be reduced by extending the Hamiltonian that generates the phase shift to an ancilla system with a Hilbert space of arbitrary dimension, and allowing arbitrary interactions between the original system and the ancilla. Such Hamiltonian extensions provide a general framework for open quantum systems, as well as for “non-linear metrology schemes” that have been investigated over the last few years. We prove that such Hamiltonian extensions cannot improve the sensitivity of the phase shift measurement when considering the quantum Fisher information optimized over input states.
Abstract We study very generally towhat extent the uncertainty with which a phase shift can be estimated in quantum metrology can be reduced by extending the Hamiltonian that generates the phase shift to an ancilla system with a Hilbert space of arbitrary dimension, and allowing arbitrary interactions between the original system and the ancilla. Such Hamiltonian extensions provide a general framework for open quantum systems, as well as for “non-linear metrology schemes” that have been investigated over the last few years. We prove that such Hamiltonian extensions cannot improve the sensitivity of the phase shift measurement when considering the quantum Fisher information optimized over input states.
A well-studied scenario in quantum parameter estimation theory arises when the parameter to be estimated is imprinted on the initial state by a Hamiltonian of the form $\ensuremath{\theta}G$. For such ``phase-shift Hamiltonians'' it has been shown that one cannot improve the channel quantum Fisher information by adding ancillas and letting the system interact with them. Here we investigate the general case, where the Hamiltonian is not necessarily a phase shift, and show that in this case in general it is possible to increase the quantum channel information and to reach an upper bound. This can be done by adding a term proportional to the derivative of the Hamiltonian, or by subtracting a term from the original Hamiltonian. Neither method makes use of any ancillas, which shows that, for quantum channel estimation with an arbitrary parameter-dependent Hamiltonian, entanglement with an ancillary system is not necessary to reach the best possible sensitivity. By adding an operator to the Hamiltonian we can also modify the time scaling of the channel quantum Fisher information. We illustrate our techniques with nitrogen vacancy center magnetometry and the estimation of the direction of a magnetic field in a given plane using a single spin-1 as probe.
This thesis explores various protocols which can be applied to quantum metrology, such that precision of the measurement can beat the best classical approaches. We first demonstrate that ancilla-assisted schemes can improve phase estimation in the presence of noise, and we propose an experiment to demonstrate these effects. Given that the use of ancillae helps, it is no surprise that there are noisy channels for which the optimal strategy may depend on the noise level. We show that there is a non-trivial crossover between the ancilla-assisted strategy and the parallel-entangled strategy for Pauli noise channels and the amplitude damping channel. We see that under certain circumstances, the environment cannot access the parameter of interest. We then integrated techniques from quantum communication, to derive a general framework that renders quantum metrology protocols into cryptographic ones. Here the protocol is unconditionally secure if the trusted parties wish only to achieve the standard quantum limit. If Heisenberg-limited precision is to be achieved, they sacrifice some security, where adversaries can access information, but only at the risk of getting caught at it (cheat-sensitivity). In many scenarios, the quantum Fisher information is achieved for only one value of the phase. In a particular phase estimation scheme that measures the parity at the output of a Mach-Zehnder interferometer where the input is a two-mode squeezed vacuum, this problem is particularly imminent. We apply an adaptive technique to resolve this issue, showing that one can achieve precisions substantially below the shot noise limit. The key to a quadratically enhanced improvement in quantum metrology is entanglement. Finally, we demonstrate in a photonic system how high-dimensional entanglement can be certified, and provide an alternate interpretation of entanglement from an information-theoretic perspective.
This thesis is dedicated to the understanding of the metrology of quantum systems by using the tools of quantum parameter estimation, in particular the quantum Fisher information (QFI). Our first project deals with a specific protocol of quantum enhanced measurement known as coherent averaging [Braun and Martin, 2011]. This protocol is based on a star topology, with one central object, the so-called quantum bus, connected to N extra subsystems, called probes. For the estimation of a parameter characteristic of the interaction between the quantum bus and the probes, coherent averaging leads to a Heisenberg limited (HL) scaling for the QFI (QFI proportional to N 2 ). Importantly this HL scaling can be obtained while starting with a separable state. This provides an advantage as generally one needs to use entangled states to achieve this scaling. Another important aspect in coherent averaging is the possibility to obtain the HL scaling by performing a measurement on the quantum bus only. These results were obtained using perturbation theory in the regime of weak interactions. In this thesis we go one step further in the study of the coherent averaging protocol. We extend the formalism of perturbation theory to encompass the possibility of estimating any parameter, in the regimes of strong and weak interactions. To illustrate the validity of our results, we introduce two models as examples for a coherent averaging scheme. In these models both the quantum bus and all the probes are qubits. In the ZZXX model, the free Hamiltonians do not commute with the interaction Hamiltonians and we have to rely on numerics to find non-perturbative solutions .In the ZZZZ model the free evolution Hamiltonians commute with the interaction Hamiltonians and we can find the exact solution analytically. Perturbation theory shows that in the strong interaction regime and starting with a separable state, we can estimate the parameter of the free evolution of the probes with a HL scaling if the free Hamiltonians do not commute with the interaction Hamiltonians. This is confirmed by the non-perturbative numerical results for the ZZXX model. In the weak interaction regime we only obtain a standard quantum limit (SQL) scaling for the parameter of the free evolution of the probes (QFI proportional to N ). When one has only access to the quantum bus, we show that the HL scaling found using the perturbation theory does not necessarily survive outside the regime of validity of the perturbation. This is especially the case as N becomes large. It is shown by comparing the exact analytical result to the perturbative result with the ZZZZ model. The same behaviour is observed with the ZZXX model using the non-perturbative numerical results. In our second project we investigate the estimation of the depolarizing channel and the phase-flip channel under non-ideal conditions. It is known that using an ancilla can lead to an improvement of the channel QFI (QFI maximized over input states feeding the channel) even if we act with the identity on the ancilla. This method is known as channel extension. In all generality the maximal channel QFI can be obtained using an ancilla whose Hilbert space has the same dimension as the dimension of the Hilbert space of the original system. In this ideal scenario using multiple ancillas — or one ancilla with a larger Hilbert space dimension — is useless. To go beyond this ideal result we take into account the possibility of loosing either the probe or a finite number of ancillas. The input states considered are GHZ and W states with n + 1 qubits (the probe plus n ancillas). We show that for any channel, when the probe is lost then all the information is lost, and the use of ancillas cannot help. For the phase-flip channel the introduction of ancillas never improves the channel QFI and ancillas are useless. For the depolarizing channel the maximal channel QFI can be reached using one ancilla and feeding the extended channel with a Bell state, but if the ancilla is lost then all the advantage is lost. We show that the GHZ states do not help to fight the loss of ancillas: If one ancilla or more are lost all the advantage provided by the use of ancillas is lost. More interestingly, we show that the W states with more than one ancilla are robust against loss. For a given number of lost ancillas, there always exists an initial number of ancillas for which a W state provides a higher QFI than the one obtained without ancillas. Our last project is about Hamiltonian parameter estimation for arbitrary Hamiltonians. It is known that channel extension does not help for unitary channels. Instead we apply the idea of extension to the Hamiltonian itself and not to the channel. This is done by adding to the Hamiltonian an extra term, which is independent of the parameter and which possibly encompasses interactions with an ancilla. We call this technique Hamiltonian extension. We show that for arbitrary Hamiltonians there exists an upper bound to the channel QFI that is in general not saturated. This result is known in the context of non-linear metrology. Here we show explicitly the conditions to saturate the bound. We provide two methods for Hamiltonian extensions, called signal flooding and Hamiltonian subtraction, that allow one to saturate the upper bound for any Hamiltonian. We also introduce a third method which does not saturate the upper bound but provides the possibility to restore the quadratic time scaling in the channel QFI when the original Hamiltonian leads only to a periodic time scaling of the channel QFI. We finally show how these methods work using two different examples. We study the estimation of the strength of a magnetic field using a NV center, and show how using signal flooding we saturate the channel QFI. We also consider the estimation of a direction of a magnetic field using a spin-1. We show how using signal flooding or Hamiltonian subtraction we saturate the channel QFI. We also show how by adding an arbitrary magnetic field we restore the quadratic time scaling in the channel QFI. Eventually we explain how coherent averaging can be scrutinized in the formalism of Hamiltonian extensions.
The Heisenberg scaling is an ultimate precision limit of parameter estimation allowed by the principles of quantum mechanics, with no counterpart in the classical realm, and has been a long-pursued goal in quantum metrology. It has been known that interactions between the probes can help reach the Heisenberg scaling without entanglement. In this paper, we show that interactions between the probes and the additional dimensions of an ancillary system may also increase the precision of parameter estimation to surpass the standard quantum limit and attain the Heisenberg scaling without entanglement, if the measurement scheme is properly designed. The quantum Fisher information exhibits periodic patterns over the evolution time, implying the existence of optimal time points for measurements that can maximize the quantum Fisher information. By implementing optimizations over the Hamiltonian, the initial states of the probes and the ancillary system, the interaction strength, and the time points for measurements, our protocol achieves the Heisenberg scaling for the parameter of the probe Hamiltonian, in terms of both evolution time and probe number. Our protocol features two aspects: (i) the Heisenberg scaling can be achieved by a product state of the probes and (ii) mere local measurement on the ancilla is sufficient, both of which reduce the quantum resources and the implementation complexity to achieve the Heisenberg scaling. The paper is concluded by the investigation of the effects of noise on this protocol.
Abstract Quantum metrology has been studied for a wide range of systems with time-independent Hamiltonians. For systems with time-dependent Hamiltonians, however, due to the complexity of dynamics, little has been known about quantum metrology. Here we investigate quantum metrology with time-dependent Hamiltonians to bridge this gap. We obtain the optimal quantum Fisher information for parameters in time-dependent Hamiltonians, and show proper Hamiltonian control is generally necessary to optimize the Fisher information. We derive the optimal Hamiltonian control, which is generally adaptive, and the measurement scheme to attain the optimal Fisher information. In a minimal example of a qubit in a rotating magnetic field, we find a surprising result that the fundamental limit of T2 time scaling of quantum Fisher information can be broken with time-dependent Hamiltonians, which reaches T4 in estimating the rotation frequency of the field. We conclude by considering level crossings in the derivatives of the Hamiltonians, and point out additional control is necessary for that case.