Building a long distance quantum network is one of the big challenges in the field of quantum communication, which requires the development of a quantum repeater. A crucial component of this is an efficient, coherent spin photon interface, and coupling single NV centers to a microcavity is a promising approach therefor. In our experiment, we integrate a diamond membrane to an open access fiber-based Fabry-Perot microcavity to increase the weak ZPL emission of NV centers. Simulations predict the feasibility of a strong enhancement of the ZPL emission efficiency, reaching values of up to 80%. We present a spatially resolved characterization of a coupled cavity-membrane device and report on the current status of the experiment.
Building a long distance quantum network is one of the big challenges in the field of quantum communication, which requires the development of a quantum repeater. A crucial component of this is an efficient, coherent spin photon interface, and coupling single NV centers to a microcavity is a promising approach therefor. In our experiment, we integrate a diamond membrane to an open access fiber-based Fabry-Perot microcavity to increase the weak ZPL emission of NV centers. Simulations predict the feasibility of a strong enhancement of the ZPL emission efficiency, reaching values of up to 80%. We present a spatially resolved characterization of a coupled cavity-membrane device and report on the current status of the experiment.
A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.
Efficient optical interfacing of spin-bearing quantum emitters is a crucial ingredient for quantum networks. A promising route therefore is to incorporate host materials as minimally processed membranes into open-access microcavities: it enables significant emission enhancement and efficient photon collection, minimizes deteriorating influence on the quantum emitter, and allows for full spatial and spectral tunability. Here, we study the properties of a high-finesse fiber Fabry-P\'erot microcavity with integrated single-crystal diamond membranes by scanning cavity microscopy. We observe the spatially resolved effects of the diamond-air interface on the cavity-mode structure: a strong correlation of the cavity finesse and mode structure with the diamond thickness and surface topography, prevalent transverse-mode mixing under diamondlike conditions, and mode-character-dependent polarization-mode splitting. Our results reveal the influence of the diamond surface on the achievable Purcell enhancement, which helps to clarify the route towards optimized spin-photon interfaces.
The negatively charged nitrogen vacancy centre in diamond is known for its coherent spin properties and optical interface, and thus is regarded a promising candidate for quantum information applications [1]. Realisation of an efficient spin-photon interface with the NV centre is made challenging however by the fact that, in bulk diamond, only 3-4% of spontaneously emitted photons occur in the zero phonon line (ZPL). Placing NV centre in an optical cavity is being explored by several groups [2][3][4] as an effective way to selectively enhance the coherent emission of NVs and thereby increase the efficiency of the coherent spin-photon coupling. Previous work reported successful coupling of the NV in nano-diamond to an open access micro-cavity and observed enhanced ZPL emission [5]. However the NV centres in nano-diamond suffer from broadened zero phonon transition and poor spin coherence. By fabricating NV centres in a ~micrometre thick membrane of high purity single crystal material we can take advantage of the tunability of open access cavities, and at the same time, provide close-to-bulk crystal environment to maintain the coherent spin properties of the NV centres. Here we report our work on the tunable cavity coupling of the ZPL of a NV centre in a 1.2micrometre-thick diamond membrane at 4K. The diamond membrane is fabricated from a 0.5mm-thick E6 CVD diamond plate where ion implantation is carried out on both surfaces to create NV centres at the depth of around 70nm. The plate is then machined into 30micrometre-thick slices, and thinned by ICP-RIE with a combination of Ar/Cl[6] and pure oxygen plasma etching recipes. The open cavity consists of a concave mirror (99.99% reflectivity) deposited on a template fabricated using Focused Ion Beam (FIB) milling[7] and a planar mirror (99.8% reflectivity) which supports the membrane. For bare cavities with mirror radii of curvature (RoC) of 12micrometre, we measured a finesse of F~2000 and mode volume as small as 0.75micrometre^3. In-situ tuning of the cavity resonance is achieved with piezoelectric actuators. When mounted in our bath cryostat the cavity modes have dominant Lorentzian line profiles which indicate a passive stability of the cavity length of better than 0.15nm. No active locking is currently deployed. With the presence of a diamond membrane inside the cavities, the measured finesse and mode volume of a cavity with 12micrometre RoC are found to be around 300 and 3 micrometre^3, respectively. We attribute the reduction in finesse to scattering at the membrane-air and membrane-mirror interfaces. On coupling to the ZPL of a target NV centre, we record a factor of 4 increase in the saturated intensity of ZPL fluorescence compared to that measured from the same NV centre in absence of the concave mirror. This result is consistent with the calculated Purcell factor of 16 combined with a relatively low efficiency of light extraction (estimated to be around 19%) from the cavity due to the scattering losses.
A Quantum Repeater Platform based on Single SiV− Centers in Diamond with Cavity-Assisted, All-Optical Spin Access and Fast Coherent Driving
Quantum key distribution enables secure communication based on the principles of quantum mechanics. The distance in fiber-based quantum communication is limited to about a hundred kilometers due to signal attenuation. Thus, quantum repeaters are required to establish large-scale quantum networks. Ideal quantum repeater nodes possess a quantum memory which is efficiently connected to photons, the carrier of quantum information. Color centers in diamond and, in particular, the negatively-charged silicon-vacancy centers are promising candidates to establish such nodes. The major obstacle is an inefficient connection between the color centers spin to the Gaussian optics of fiber networks. Here, we present an efficient spin-photon interface. Individual silicon-vacancy centers coupled to the mode of a hemispherical Fabry-Pérot microcavity show Purcell-factors larger than 1 when operated in a bath of liquid Helium. We demonstrate coherent optical driving with a Rabi frequency of 290MHz and all-optical access to the electron spin in strong magnetic fields of up to 3.2T. Spin initialization within 67ns with a fidelity of 80% and a lifetime of 350ns are reached inside the cavity. The spin-photon interface is passively stable, enabled by placing a color center containing nanodiamond in the hemispherical Fabry-Pérot mirror structure and by choosing short cavity lengths. Therefore, our demonstration opens the way to realize quantum repeater applications.
Quantum computation and information processing is an exciting multi-disciplinary field, whose objective is to harness the power of superposition and entanglement of quantum states to establish a new regime of computation for Mankind. This work demonstrates our efforts, in both materials and device engineering, towards building an efficient spin-photon interface for a promising solid-state spin qubit, namely the nitrogen-vacancy (NV) centre in diamond. Improvement in optical coherence of NV centre is realised via the novel laser-writing fabrication technique and quantified using high-resolution spectroscopy. A new metric concerning the charge-state stability of the NV centre is introduced to better translate the measured NV quality to entanglement generation efficiency. To address the low branching ratio of NV emission into the zero-phonon line (ZPL) transition, a hybrid open-cavity device incorporating low-dimensional micro-structured NV-containing diamond membrane is fabricated and characterised. In addition to the more commonly quoted emission enhancement factor, the collection efficiency of the cavity device is also quantified via numerical simulations. Combining all observed improvements in key metrics under the framework of double-heralding entanglement schemes, a two order of magnitude increase in entanglement generate rate can be expected. The established simulation methodology is widely applicable in the design and analysis of similar devices with an emitter-in-cavity setup.
With their ability to process and transfer quantum information, large-scale entanglement-based quantum networks could be at the heart of a new age of quantum information, enabling fundamentally new applications such as distributed quantum computation, quantum communication, and quantum enhanced sensing. Due to their long spin coherence, controllable local qubit registers and optically active spins, color centers in diamond are prime candidates for nodes of such a network, and have enabled some of the most advanced quantum network demonstrations to date. These demonstrations include the distribution of a 3-node GHZ state across a quantum network, entanglement swapping, entanglement distillation, and memory-enhanced quantum communication. To move beyond current proof-of-principle networks, a further increase of entanglement generation rates is crucial. This thesis presents theoretical and experimental work on enhancing the spin-photon interface of color centers in diamond to achieve this goal, making use of the Purcell effect. The discussed work follows two main directions: embedding of color centers in open, tuneable Fabry-Perot micro-cavities, and in all-diamond photonic crystal cavities. First, we describe theoretical and experimental progress towards cavity-enhanced quantum networks based on nitrogen-vacancy (NV) centers in diamond. Due to their first order sensitivity to electric fields, we choose to embed NV centers in microns-thin diamond membranes that can be integrated into open fiber-based micro-cavities. We develop analytical methods to optimize the design of such open cavity systems for maximum Purcell enhancement of embedded color centers. We demonstrate a method to fabricate optically coherent NV centers in microns-thin diamond membranes, and use such structures to demonstrate the resonant excitation and detection of coherent, Purcell enhanced NV emission. A theoretical model in excellent agreement with our results suggests our system can improve entanglement rates between distant NV centers by two orders of magnitude with near-term improvements to the setup. Second, we describe progress towards an efficient spin-photon interface of group-IV color centers in diamond by coupling them to photonic nanostructures, allowing for large-scale integration. Due to their first-order insensitivity to electric fields, group-IV color centers can be brought in close proximity to surfaces (~ 100 nm), allowing for sub-wavelength mode volumes and thus very high Purcell factors. We numerically optimize photonic crystal cavity designs to maximize the Purcell enhancement of embedded emitters, test the robustness of our designs to real-world fabrication imperfections, and devise a method to efficiently interface nanophotonic structures. We then proceed to fabricate all-diamond photonic crystal cavities, making use of a dry etching technique that is selective to different crystallographic directions, and characterize the resulting optical quality factors. Finally, we marry the developed fabrication methods to fabricate microns-sized diamond platelets that can be transferred from a holding frame in a controlled fashion. This capability could be crucial for the realization of hybrid photonic circuits that we expect to be at the heart of future large-scale quantum networks.