The generation of random numbers is, nowadays, of increasing importance. From economics to security and science, a number of applications require a large amount of random numbers generated with negligible correlation. Several (pseudo-)Random Number Generators (RNGs) are based on deterministic approaches that, in case of successful cryptographic attack, are subject to critical failure. A more secure source of randomness exploits quantum effects where the intrinsic uncertainty of the measured process renders the source truly random.
The generation of random numbers is, nowadays, of increasing importance. From economics to security and science, a number of applications require a large amount of random numbers generated with negligible correlation. Several (pseudo-)Random Number Generators (RNGs) are based on deterministic approaches that, in case of successful cryptographic attack, are subject to critical failure. A more secure source of randomness exploits quantum effects where the intrinsic uncertainty of the measured process renders the source truly random.
Random numbers are fundamental elements in different fields of science and technology such as computer simulation like Monte Carlo-method simulation, statistical sampling, cryptography, games and gambling, and other areas where unpredictable results are necessary. Random number generators (RNG) are generally classified as “pseudo”-random number generators (PRNG) and "truly" random number generators (TRNG). Pseudo random numbers are generated by computer algorithms with a (random) seed and a specific formula. The random numbers produced in this way (with a small degree of unpredictability) are good enough for some applications such as computer simulation. However, for some other applications like cryptography they are not completely reliable. When the seed is revealed, the entire sequence of numbers can be produced. The periodicity is also an undesirable property of PRNGs that can be disregarded for most practical purposes if the sequence recurs after a very long period. However, the predictability still remains a tremendous disadvantage of this type of generators. Truly random numbers, on the other hand, can be generated through physical sources of randomness like flipping a coin. However, the approaches exploiting classical motion and classical physics to generate random numbers possess a deterministic nature that is transferred to the generated random numbers. The best solution is to benefit from the assets of indeterminacy and randomness in quantum physics. Based on the quantum theory, the properties of a particle cannot be determined with arbitrary precision until a measurement is carried out. The result of a measurement, therefore, remains unpredictable and random. Optical phenomena including photons as the quanta of light have various random, non-deterministic properties. These properties include the polarization of the photons, the exact number of photons impinging a detector and the photon arrival times. Such intrinsically random properties can be exploited to generate truly random numbers. Silicon (Si) is considered as an interesting material in integrated optics. Microelectronic chips made from Si are cheap and easy to mass-fabricate, and can be densely integrated. Si integrated optical chips, that can generate, modulate, process and detect light signals, exploit the benefits of Si while also being fully compatible with electronic. Since many electronic components can be integrated into a single chip, Si is an ideal candidate for the production of small, powerful devices. By complementary metal-oxide-semiconductor (CMOS) technology, the fabrication of compact and mass manufacturable devices with integrated components on the Si platform is achievable. In this thesis we aim to model, study and fabricate a compact photonic quantum random number generator (QRNG) on the Si platform that is able to generate high quality, "truly" random numbers. The proposed QRNG is based on a Si light source (LED) coupled with a Si single photon avalanche diode (SPAD) or an array of SPADs which is called Si photomultiplier (SiPM). Various implementations of QRNG have been developed reaching an ultimate geometry where both the source and the SPAD are integrated on the same chip and fabricated by the same process. This activity was performed within the project SiQuro—on Si chip quantum optics for quantum computing and secure communications—which aims to bring the quantum world into integrated photonics. By using the same successful paradigm of microelectronics—the study and design of very small electronic devices typically made from semiconductor materials—, the vision is to have low cost and mass manufacturable integrated quantum photonic circuits for a variety of different applications in quantum computing, measure, sensing, secure communications and services. The Si platform permits, in a natural way, the integration of quantum photonics with electronics. Two methodologies are presented to generate random numbers: one is based on photon counting measurements and another one is based on photon arrival time measurements. The latter is robust, masks all the drawbacks of afterpulsing, dead time and jitter of the Si SPAD and is effectively insensitive to ageing of the LED and to its emission drifts related to temperature variations. The raw data pass all the statistical tests in national institute of standards and technology (NIST) tests suite and TestU01 Alphabit battery without a post processing algorithm. The maximum demonstrated bit rate is 1.68 Mbps with the efficiency of 4-bits per detected photon. In order to realize a small, portable QRNG, we have produced a compact configuration consisting of a Si nanocrystals (Si-NCs) LED and a SiPM. All the statistical test in the NIST tests suite pass for the raw data with the maximum bit rate of 0.5 Mbps. We also prepared and studied a compact chip consisting of a Si-NCs LED and an array of detectors. An integrated chip, composed of Si p+/n junction working in avalanche region and a Si SPAD, was produced as well. High quality random numbers are produced through our robust methodology at the highest speed of 100 kcps. Integration of the source of entropy and the detector on a single chip is an efficient way to produce a compact RNG. A small RNG is an essential element to guarantee the security of our everyday life. It can be readily implemented into electronic devices for data encryption. The idea of "utmost security" would no longer be limited to particular organs owning sensitive information. It would be accessible to every one in everyday life.
Even if the output of a Random Number Generator (RNG) is perfectly uniformly distributed, it may be correlated to pre-existing information and therefore be predictable. Statistical tests are thus not sufficient to guarantee that an RNG is usable for applications, e.g., in cryptography or gambling, where unpredictability is important. To enable such applications a stronger notion of randomness, termed "true randomness", is required, which includes independence from prior information. Quantum systems are particularly suitable for true randomness generation, as their unpredictability can be proved based on physical principles. Practical implementations of Quantum RNGs (QRNGs) are however always subject to noise, i.e., influences which are not fully controlled. This reduces the quality of the raw randomness generated by the device, making it necessary to post-process it. Here we provide a framework to analyse realistic QRNGs and to determine the post-processing that is necessary to turn their raw output into true randomness.
Random number generators (RNG) are an important resource in many areas: cryptography (both quantum and classical), probabilistic computation (Monte Carlo methods), numerical simulations, industrial testing and labeling, hazard games, scientific research etc. Because today's computers are deterministic, they can not create random numbers unless complemented with a physical RNG. Randomness of a RNG can be defined and scientifically characterized and measured. Especially valuable is the information-theoretic provable RNG which, at state of the art, seem to be possible only by harvest of randomness inherent to certain (simple) quantum systems and such a generator we call Quantum RNG (QRNG). On the other hand, current industry standards dictate use of RNGs based on free running oscillators (FRO) whose randomness is derived from electronics noise present in logic circuits and which, although quantum in nature, cannot be strictly proven. This approach is currently used in FPGA and ASIC chips. We compare weak and strong aspects of the two approaches for use in cryptography and in general. We also give an alternative definition of randomness, discuss usage of single photon detectors in realization of QRNGs and give several examples where QRNG can significantly improve security of a cryptographic system.
The construction of a Pseudo-Random Number Generator (PRNG) is an extremely decisive task in the field of Cryptography, Gaming, Computational statistics, Simulation processes, Gambling, and other fields. But many of the PRNGs are not cryptographically secure so various kinds of models have been presented to generate Pseudo-Random numbers. As generators are used in the field of cryptography too therefore it is inescapable to assess it among scientists and researchers. In this study, we would evaluate different kinds of RNGs against quantum attacks including the one which is based on lattice-based cryptography. In the end, we would contrive to wind up how the lattice-based PRNGS are pragmatic for the Post Quantum Cryptography.
Nowadays information technologies are widespread and used in every computer-based system, hence information security tasks are quite important and their successful solution is required in business process. Cryptographic means are used in different applications, especially in cases when data confidentiality should be provided; although they can be utilized to maintain data availability and integrity, user's anonymity, author's non-repudiation and so on. Many information security tools use random numbers, but unfortunately, quality of output random numbers and speed of their generation do not satisfy modern requirements. The rate of production-run random number generators is limited by the physical processes used. One of the reasons of low random numbers generating rate is application of binary events. Many generators use analog events, e.g. noise in electronic devices, converted to binary numbers utilizing the threshold value or quantum discrete events, e.g. photon passing through the polarizer. The main idea of this work is that one can increase random number generator's rate using the non-binary sequences, e.g. non-binary quantum processes.