The geometric phases of a nanowire-bridged superconducting Fabry-Perot resonator subjected to a microwave transmission have been investigated through its modelling into a RLC-circuit. Because the Hamiltonian of the system is a somewhat complicated form, special mathematical techniques, such as the invariant operator method and the unitary transformation approach, have been adopted in order to treat the system; These methods are very useful for managing complicated time-dependent Hamiltonian systems. We have rigorously evaluated the analytical geometric phases in both the Fock and coherent states. Typically, the geometric phases oscillate and the amplitude of such oscillations tend to grow over time. The influence of parameters of the system on the geometric phases has been analyzed in detail through the relevant illustrations. From our research, the concept of geometric phases and associated quantum mechanical characters of the system has been clarified. Our investigation for the geometric phases is useful for understanding topological features of the system, that take place through the evolution of the wave functions.
The geometric phases of a nanowire-bridged superconducting Fabry-Perot resonator subjected to a microwave transmission have been investigated through its modelling into a RLC-circuit. Because the Hamiltonian of the system is a somewhat complicated form, special mathematical techniques, such as the invariant operator method and the unitary transformation approach, have been adopted in order to treat the system; These methods are very useful for managing complicated time-dependent Hamiltonian systems. We have rigorously evaluated the analytical geometric phases in both the Fock and coherent states. Typically, the geometric phases oscillate and the amplitude of such oscillations tend to grow over time. The influence of parameters of the system on the geometric phases has been analyzed in detail through the relevant illustrations. From our research, the concept of geometric phases and associated quantum mechanical characters of the system has been clarified. Our investigation for the geometric phases is useful for understanding topological features of the system, that take place through the evolution of the wave functions.
The geometric phase is an extra phase evolution in the wave function of vibrations that is potentially applicable in a broad range of science and technology. The characteristics of the geometric phase in the squeezed state for a carbon-nanotube-based nanowire resonator have been investigated by means of the invariant operator method. The introduction of a linear invariant operator, which is useful for treating a complicated time-dependent Hamiltonian system, enabled us to derive the analytical formula of the geometric phase. By making use of this, we have analyzed the time behavior of the geometric phase based on relevant illustrations. The influence of squeezing parameters on the evolution of the geometric phase has been investigated. The geometric phase, in large, oscillates, and the envelope of such oscillation increases over time. The rate of the increase of the geometric phase is large when the parameters, such as the classical amplitude of the oscillation, the damping factor, and the amplitude of the driving force, are large. We have confirmed a very sharp increase of the geometric phase over time in the case that the angular frequency of the system reaches near the resonance angular frequency. Our development regarding the characteristics of the geometric phase is crucial for understanding the topological features in nanowire oscillations.
The topic of superconducting nanowires has recently been an interesting field of research which has included the study of the superconductor to insulator transition (SIT), the observation of macroscopic quantum behavior such as quantum phase slips (QPS), and the potential use of nanowires as qubits. Superconducting coplanar microwave waveguide resonators have also become a popular way of studying superconducting junctions and qubits, as they provide an extremely low noise environment. For example, superconducting two-dimensional Fabry-Perot resonators have been used by other groups to make non-demolition measurements of a qubit. The motivation of this thesis will be the merging of the fields of superconducting nanowires and the technique of using superconducting microwave resonators to study junctions by incorporating a nanowire into the resonator itself at a current anti-node. By doing this, the nonlinear effects of the nanowire can be studied which may find application in single photon detectors, mixers, and the readout of qubits. We also employ the technique of molecular templating to fabricate some of the thinnest superconducting nanowires ever studied (down to ~ 5 nm in diameter in some cases). In this thesis, we extend the understanding of the nonlinear properties of a nanowire- resonator system and investigate a new type of nonlinearity that involves a pulsing regime between the superconducting and normal phases of the nanowire. We develop a model, which describes the results quantitatively and by modeling the system, we are able to extract information regarding the relaxation time of the nanowire back into the superconducting state. We also study double nanowire-resonator systems where two closely spaced parallel nanowires interrupt the resonator center conductor and form a loop where vortex tunneling processes can occur. Using a double nanowire-resonator we are able to observe the Little-Parks effect at low temperatures (where the resistance of the wires is immeasurably low) and are able to confirm the multivalued nature of the current phase relationship (CPR) in nanowires. Additionally, we observe an anomalous transmission regime where the periodic pulsing is replaced by stochastic amplitude fluctuations. In addition to microwave measurements on nanowires, we also study the normal state in resistively shunted nanowires with dc measurements where the inclusion of a shunt resistor is observed to change the nature of the normal state from the Joule heated state to a state that preserves phase coherence. Finally, the statistics on switching current events in graphene proximity junctions are analyzed and compared to the well known results for Josephson junctions. Only thermal activation (and no macroscopic quantum tunneling) is observed in graphene proximity superconducting junctions down to temperatures of ~ 300 mK.
We report microwave transmission measurements of superconducting Fabry-Perot resonators, having a superconducting nanowire placed at a supercurrent antinode. As the plasma oscillation is excited, the supercurrent is forced to flow through the nanowire. The microwave transmission of the resonator-nanowire device shows a nonlinear resonance behavior, significantly dependent on the amplitude of the supercurrent oscillation. We show that such amplitude-dependent response is due to the nonlinearity of the current-phase relationship of the nanowire. The results are explained within a nonlinear oscillator model of the Duffing oscillator, in which the nanowire acts as a purely inductive element, in the limit of low temperatures and low amplitudes. The low-quality factor sample exhibits a ``crater'' at the resonance peak at higher driving power, which is due to dissipation. We observe a hysteretic bifurcation behavior of the transmission response to frequency sweep in a sample with a higher quality factor. The Duffing model is used to explain the Duffing bistability diagram. We also propose a concept of a nanowire-based qubit that relies on the current dependence of the kinetic inductance of a superconducting nanowire.
An adiabatic invariant, which is a conserved quantity, is useful for studying quantum and classical properties of dynamical systems. Adiabatic invariants for time-dependent superconducting qubit-oscillator systems and resonators are investigated using the Liouville-von Neumann equation. At first, we derive an invariant for a simple superconducting qubit-oscillator through the introduction of its reduced Hamiltonian. Afterwards, an adiabatic invariant for a nanomechanical resonator linearly interfaced with a superconducting circuit, via a coupling with a time-dependent strength, is evaluated using the technique of unitary transformation. The accuracy of conservation for such invariant quantities is represented in detail. Based on the results of our developments in this paper, perturbation theory is applicable to the research of quantum characteristics of more complicated qubit systems that are described by a time-dependent Hamiltonian involving nonlinear terms.
Superconducting circuits reveal themselves as promising physical devices with multiple uses. Within those uses, the fundamental concept of the geometric phase accumulated by the state of a system shows up recurrently, as, for example, in the construction of geometric gates. Given this framework, we study the geometric phases acquired by a paradigmatic setup: a transmon coupled to a superconductor resonating cavity. We do so both for the case in which the evolution is unitary and when it is subjected to dissipative effects. These models offer a comprehensive quantum description of an anharmonic system interacting with a single mode of the electromagnetic field within a perfect or dissipative cavity, respectively. In the dissipative model, the non-unitary effects arise from dephasing, relaxation, and decay of the transmon coupled to its environment. Our approach enables a comparison of the geometric phases obtained in these models, leading to a thorough understanding of the corrections introduced by the presence of the environment.
The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.