Abstract In quantum metrology, the precision of unknown parameter estimation is studied in the quantum regime, and the choice of the probe state plays an important role in determining the precision of the parameter to be estimated. The quality of quantum metrology will be reduced in the presence of quantum noise during the memory time of probe states after preparation. Meanwhile the noisy probe state can be manipulated by different protocols such as single‐qubit purification, entanglement purification, and entanglement distillation etc. In this paper, the effects of these manipulations on the usefulness, that is, quantum Fisher information (QFI), of the noisy probe state in quantum metrology are studied. The results show that joint operations in single‐qubit purification and entanglement purification processes play positive roles in enhancing the QFI of the probe states, and local measurements in entanglement purification and entanglement distillation processes play both positive and negative roles in enhancing the QFI of the probe states. In this sense, single‐qubit purification will always be helpful in parameter estimation by using single qubits as probe, and entanglement purification process maybe more suitable for improving the estimation precision when entangled‐state probe is adopted.
Abstract In quantum metrology, the precision of unknown parameter estimation is studied in the quantum regime, and the choice of the probe state plays an important role in determining the precision of the parameter to be estimated. The quality of quantum metrology will be reduced in the presence of quantum noise during the memory time of probe states after preparation. Meanwhile the noisy probe state can be manipulated by different protocols such as single‐qubit purification, entanglement purification, and entanglement distillation etc. In this paper, the effects of these manipulations on the usefulness, that is, quantum Fisher information (QFI), of the noisy probe state in quantum metrology are studied. The results show that joint operations in single‐qubit purification and entanglement purification processes play positive roles in enhancing the QFI of the probe states, and local measurements in entanglement purification and entanglement distillation processes play both positive and negative roles in enhancing the QFI of the probe states. In this sense, single‐qubit purification will always be helpful in parameter estimation by using single qubits as probe, and entanglement purification process maybe more suitable for improving the estimation precision when entangled‐state probe is adopted.
Quantum metrology is a subject of studying quantum measurement and quantum statistical deduction, and the precision of parameter estimation can be enhanced by quantum properties. In general, the process of parameter estimation includes four steps:preparation of probe state, parameterization process, measurement, and data processing. Of these four steps, the preparation of probe state is the most crucial. However, in practical applications, in the process of preparing quantum probe state, the probe system will couple to its environment, which will inevitably cause the quantum properties of the probe system to deteriorate, and thus reducing the precision of quantum parameter estimation. The dynamics of quantum Fisher information (QFI) for W state and Greenberger-Horne-Zeilinger (GHZ) state have been studied in decoherence channels. Because W state and GHZ state have different entanglement properties, the studies of the dynamics of QFI for the superposition of W state and GHZ state are of practical significance in quantum metrology field. In this paper, the dynamics of QFIs for the superposition of W state and GHZ state in three typical decoherence channels (depolarization channel, amplitude damping channel and phase damping channel) are studied. In the four steps of quantum parameter estimation, our major attention is paid to the first step (i.e., the preparation of probe state). For comparison, the QFIs of different probe states are studied, with the other three steps fixed, i.e., all the probe states will undergo the same parameterization, measurement and estimation process. The parameterization process involved here is a quantum spin operation (specified by the spin rotation direction), which is chosen to maximize the QFI of the probe state. The initial probe states under consideration are the superpositions of W state and GHZ state of three-particle and five-particle systems, and the QFI dynamics of those probe states are studied in the three different typical decoherence channels. By using the operator-sum (Kraus) representation of those three typical decoherence channels, the QFI dynamics of the probe state can be analytically derived in three different decoherence channels. The results show that in the depolarization channel, the maximum QFI of the probe state decreases with the decoherence evolving to zero in the end; in the amplitude damping channel, the QFI of the probe state decreases to the minimum with the decoherence evolution and then increases to the shot noise limit; in the phase damping channel, the QFI of the probe state decreases with the evolution of decoherence, but the final stable value is not zero. Further analyses show that W state component of the superposition plays a role in resisting phase damping and the GHZ state component plays a role in resisting amplitude damping. These results can help us to choose the optimal probe state for maximizing the estimation precision in practice.
Quantum metrology overcomes standard precision limits and plays a central role in science and technology. Practically, it is vulnerable to imperfections such as decoherence. Here we demonstrate quantum metrology for noisy channels such that entanglement with ancillary qubits enhances the quantum Fisher information for phase estimation but not otherwise. Our photonic experiment covers a range of noise for various types of channels, including for two randomly alternating channels such that assisted entanglement fails for each noisy channel individually. We simulate noisy channels by implementing space-multiplexed dual interferometers with quantum photonic inputs. We demonstrate the advantage of entanglement-assisted protocols in a phase estimation experiment run with either a single-probe or multiprobe approach. These results establish that entanglement with ancillae is a valuable approach for delivering quantum-enhanced metrology. Our approach to entanglement-assisted quantum metrology via a simple linear-optical interferometric network with easy-to-prepare photonic inputs provides a path towards practical quantum metrology.
Abstract We consider entanglement distillation with noisy operations in which quantum measurements that constitute a general quantum operation are particularly noisy. We present a protocol for purifying noisy measurements and show that imperfect local operations can distill entanglement. The protocol works for arbitrary noisy measurements in general and is cost-effective and resource-efficient with single additional qubit per party to resolve the distillation of entanglement. The purification protocol is feasible with currently available quantum technologies and readily applied to entanglement applications.
Quantum metrology is superior to classical metrology in parameter estimation. This is because quantum states have coherence that, however, does not exist in classical states. Previous works were limited to the study of the relationship between quantum Fisher information (QFI) and coherence of the initial probe state only for a specific single-qubit parameter estimation process (e.g., a process described by a single-qubit spin angular momentum operator Jz). Here, we consider a more general case and study the relationship between QFI and coherence of the initial probe state for a single-qubit general parameter estimation process, which is described by a single-qubit spin angular momentum operator ${J}_{\stackrel{P\vec}{n}}$ with a general unit vector $\stackrel{P\vec}{n}$. We find that the QFI is proportional to the square of coherence of the initial probe state, when the single-qubit bases are eigenstates of the spin angular momentum operator ${J}_{\stackrel{P\vec}{n}}$ describing the parametrization process. We also design and conduct a linear optical experiment to support our theory. The experimental results are in good agreement with the theoretical ones. This work provides an important guideline for enhancing the precision of parameter estimation.
The quantum Fisher information of a quantum state with respect to a certain parameter quantifies the sensitivity of the quantum state to changes in that parameter. Maximizing the quantum Fisher information is essential for achieving the optimal estimation precision of quantum sensors. A typical quantum sensor involves a qubit(e.g. a spin-1/2) probe undergoing an unknown rotation, here the unknown rotation angle is the parameter to be estimated. A well known limitation is that if the rotation axis is unknown, the maximal quantum Fisher information is impossible to attain. This limitation has been lifted recently by leveraging entanglement between the probe qubit and an ancilla qubit. Namely, through measurement of the ancilla after the axis is revealed, one can prepare the probe that is optimal for any unknown rotation axis. This proposal, however, works only for a spin-1/2. Considering large spin probes can achieve a larger quantum Fisher information, offering enhanced metrological advantage, we here utilize the entanglement between a large spin probe and an ancilla to achieve optimal quantum Fisher information for estimating the rotation angle, without prior knowledge of the rotation axis. Different from the previous spin-1/2 case, achieving the optimal precision with large spins generally requires post-selection, resulting in a success probability dependent on the dimension of the Hilbert space. Furthermore, we extend the encoding state from the maximally entangled case to general entangled states, showing that optimal metrology can still be achieved with a certain success probability.
Noise is the main source that hinders us from fully exploiting quantum advantages in various quantum informational tasks. However, characterizing and calibrating the effect of noise is not always feasible in practice. Especially for quantum parameter estimation, an estimator constructed without precise knowledge of noise entails an inevitable bias. Recently, virtual purification-based error mitigation (VPEM) has been proposed to apply for quantum metrology to reduce such a bias occurring from unknown noise. While it was demonstrated to work for particular cases, whether VPEM always reduces a bias for general estimation schemes is unclear. For more general applications of VPEM to quantum metrology, we study factors determining whether VPEM can reduce the bias. We find that the closeness between the dominant eigenvector of a noisy state and the ideal quantum probe (without noise) with respect to an observable determines the reducible amount of bias by VPEM. Next, we show that one should carefully choose the reference point of the target parameter, which gives a smaller bias than others because the bias depends on the reference point. Otherwise, even if the dominant eigenvector and the ideal quantum probe are close, the bias of the mitigated case could be larger than the nonmitigated one. Finally, we analyze the error mitigation for a phase estimation scheme under various noises. Based on our analysis, we predict whether VPEM can effectively reduce a bias and numerically verify our results.