Abstract. The goal of Multi-Party Computation (MPC) is to perform an arbitrary computation in a distributed, private, and fault-tolerant way. For this purpose, a fixed set of n parties runs a protocol that tolerates an adversary corrupting a subset of the parties, preserving certain security guarantees like correctness, secrecy, robustness, and fairness. Corruptions can be either passive or active: A passively corrupted party follows the protocol correctly, but the adversary learns the entire internal state of this party. An actively corrupted party is completely controlled by the adversary, and may deviate arbitrarily from the protocol. A mixed adversary may at the same time corrupt some parties actively and some additional parties passively. In this work, we consider the statistical setting with mixed adversaries and study the exact consequences of active and passive corruptions on secrecy, correctness, robustness, and fairness separately (i.e., hybrid security). Clearly, the number of passive corruptions affects the thresholds for secrecy, while the number of active corruptions affects all thresholds. It turns out that in the statistical setting, the number of passive corruptions in particular also affects the threshold for correctness, i.e., in all protocols there are (tolerated) adversaries for which a single additional passive corruption is sufficient to break correctness. This is in contrast to both the perfect and the computational setting, where such an influence cannot be observed. Apparently, this effect arises from the use of information-theoretic signatures, which are part of most (if not all) statistical protocols.
Abstract. The goal of Multi-Party Computation (MPC) is to perform an arbitrary computation in a distributed, private, and fault-tolerant way. For this purpose, a fixed set of n parties runs a protocol that tolerates an adversary corrupting a subset of the parties, preserving certain security guarantees like correctness, secrecy, robustness, and fairness. Corruptions can be either passive or active: A passively corrupted party follows the protocol correctly, but the adversary learns the entire internal state of this party. An actively corrupted party is completely controlled by the adversary, and may deviate arbitrarily from the protocol. A mixed adversary may at the same time corrupt some parties actively and some additional parties passively. In this work, we consider the statistical setting with mixed adversaries and study the exact consequences of active and passive corruptions on secrecy, correctness, robustness, and fairness separately (i.e., hybrid security). Clearly, the number of passive corruptions affects the thresholds for secrecy, while the number of active corruptions affects all thresholds. It turns out that in the statistical setting, the number of passive corruptions in particular also affects the threshold for correctness, i.e., in all protocols there are (tolerated) adversaries for which a single additional passive corruption is sufficient to break correctness. This is in contrast to both the perfect and the computational setting, where such an influence cannot be observed. Apparently, this effect arises from the use of information-theoretic signatures, which are part of most (if not all) statistical protocols.
The goal of Multi-Party Computation (MPC) is to perform an arbitrary computation in a distributed, private, and fault-tolerant way. For this purpose, a fixed set of n parties runs a protocol that tolerates an adversary corrupting a subset of the participating parties, and still preserves certain security guarantees.
Most MPC protocols provide security guarantees in an all-or-nothing fashion. In this paper, we provide the first treatment of MPC with graceful degradation of both security and corruptions. First of all, our protocols provide graceful degradation of security, i.e., different security guarantees depending on the actual number of corrupted parties: the more corruptions, the weaker the security guarantee. We consider all security properties generally discussed in the literature (secrecy, correctness, robustness, fairness, and agreement on abort). Furthermore, the protocols provide graceful degradation with respect to the corruption type, by distinguishing fully honest parties, passively corrupted parties, and actively corrupted parties. Security can be maintained against more passive corruptions than is possible for active corruptions.
We focus on perfect security, and prove exact bounds for which MPC with graceful degradation of security and corruptions is possible for both threshold and general adversaries. Furthermore, we provide protocols that meet these bounds. This strictly generalizes known results on hybrid security and mixed adversaries.
Abstract. The goal of Multi-Party Computation (MPC) is to perform an arbitrary computation in a distributed, private, and fault-tolerant way. For this purpose, a fixed set of n parties runs a protocol that tolerates an adversary corrupting a subset of the participating parties, and still preserves certain security guarantees. Most MPC protocols provide security guarantees in an all-or-nothing fashion: Either the set of corrupted parties is tolerated and the protocol provides all specified security guarantees, or the set of corrupted parties is not tolerated and the protocol provides no security guarantees at all. Similarly, corruptions are in an all-or-nothing fashion: Either a party is fully honest, or it is fully corrupted. For example, an actively secure protocol is rendered completely insecure when just one party is corrupted additionally to what is tolerated, even if all corrupted parties are only passive. In this paper, we provide the first treatment of MPC with graceful degradation of both security and corruptions. First of all, our protocols provide graceful degradation of security, i.e., different security guarantees depending on the actual number of corrupted parties: the more corruptions, the weaker the security guarantee. We consider all security properties generally discussed in the literature (secrecy, correctness, robustness, fairness, and agreement on abort). Furthermore, the protocols provide
Abstract. Most protocols for distributed, fault-tolerant computation, or multi-party computation (MPC), provide security guarantees in an all-or-nothing fashion: If the number of corrupted parties is below a certain threshold, these protocols provide all specified security guarantees. Beyond this threshold, they provide no security guarantees at all. Furthermore, most previous protocols achieve either information-theoretic (IT) security, in which case this threshold is low, or they achieve only computational security, in which case this threshold is high. In contrast, a hybrid-secure proto-col provides different security guarantees depending on the set of corrupted parties and the com-putational power of the adversary, without being aware of the actual adversarial setting. Thus, hybrid-secure MPC protocols allow for graceful degradation of security. We present a hybrid-secure MPC protocol that provides an optimal trade-off between IT robustness and computational privacy: For any robustness parameter ρ < n 2, we obtain one MPC protocol that is simultaneously IT secure with robustness for up to t ≤ ρ actively corrupted parties, IT secure with fairness (no robustness) for up to t < n 2, and computationally secure with agreement on abort
Abstract. At STOC ’87, Goldreich et al. presented two protocols for secure multi-party computation (MPC) among n parties: The first protocol provides passive security against t < n corrupted parties. The second protocolprovidesevenactive security,butonlyagainstt < n/2corrupted parties. Although these protocols provide security against the provably highest possible number of corruptions, each of them has its limitation: The first protocol is rendered completely insecure in presence of a single active corruption, and the second protocol is rendered completely insecure in presence of ⌈n/2 ⌉ passive corruptions. At Crypto 2006, Ishai et al. combined these two protocols into a single protocol which provides passive security against t < n corruptions and active security against t < n/2 corruptions. This protocol unifies the security guarantees of the passive world and the active world (“best of both worlds”). However, the corruption threshold t < n can be tolerated only when all corruptions are passive. With a single active corruption,
Over the past 20 years, the efficiency of secure multi-party protocols has been greatly improved. While the seminal protocols from the late 80’s require a communication of Ω(n⁶) field elements per multiplication among n parties, recent protocols offer linear communication complexity. This means that each party needs to communicate a constant number of field elements per multiplication, independent of n. However, these efficient protocols only offer active security, which implies that at most t<n/3 (perfect security), respectively t<n/2 (statistical or computational security) parties may be corrupted. Higher corruption thresholds (i.e., t≥ n/2) can only be achieved with degraded security (unfair abort), where one single corrupted party can prevent honest parties from learning their outputs. The aforementioned upper bounds (t<n/3 and t<n/2) have been circumvented by considering mixed adversaries (Fitzi et al., Crypto' 98), i.e., adversaries that corrupt, at the same time, some parties actively, some parties passively, and some parties in the fail-stop manner. It is possible, for example, to achieve perfect security even if 2/3 of the parties are faulty (three quarters of which may abort in the middle of the protocol, and a quarter may even arbitrarily misbehave). This setting is much better suited to many applications, where the crash of a party is more likely than a coordinated active attack. Surprisingly, since the presentation of the feasibility result for the mixed setting, no progress has been made in terms of efficiency: the state-of-the-art protocol still requires a communication of Ω(n⁶) field elements per multiplication. In this paper, we present a perfectly-secure MPC protocol for the mixed setting with essentially the same efficiency as the best MPC protocols for the active-only setting. For the first time, this allows to tolerate faulty majorities, while still providing optimal efficiency. As a special case, this also results in the first fully-secure MPC protocol secure against any number of crashing parties, with optimal (i.e., linear in n) communication. We provide simulation-based proofs of our construction.
Abstract. Secure multi-party computation (MPC) allows a set P of n players to evaluate a function f in presence of an adversary who corrupts a subset of the players. In this paper we consider active, general adversaries, characterized by a so-called adversary structure Z which enumerates all possible subsets of corrupted players. In particular for small sets of players general adversaries better capture real-world requirements than classical threshold adversaries. Protocols for general adversaries are “efficient ” in the sense that they require |Z | O(1) bits of communication. However, as |Z | is usually very large (even exponential in n), the exact exponent is very relevant. In the setting with perfect security, the most efficient protocol known to date communicates O(|Z | 3) bits; we present a protocol for this setting which communicates O(|Z | 2) bits. In the setting with statistical security, O(|Z | 3) bits of communication is needed in general (whereas for a very restricted subclass of adversary structures, a protocol with communication O(|Z | 2) bits is known); we present a protocol for this setting (without limitations) which communicates O(|Z | 1) bits.