Quantum annealing can potentially be used to find better solutions to hard optimization problems faster than purely classical hardware. To take full advantage of quantum effects such as tunneling, a physical annealer should be comprised of qubits with a sufficient degree of quantum coherence. In addition, to encode useful problems, an annealer should provide a dense physical connectivity graph between qubits. Towards these goals, we develop superconducting ``fluxmon'' flux qubits suitable for high-connectivity quantum annealing without the use of performance-degrading lossy dielectrics. We carry out in-depth studies of noise and dissipation, and of qubit-qubit coupling in the strongly nonlinear regime. We perform the first frequency-resolved measurements extracting both the quantum and classical parts of the 1/f flux noise intrinsic to superconducting devices, and observe the classical-to-quantum crossover of the noise. We also identify atomic hydrogen as a magnetic dissipation source. We then implement tunable inter-qubit coupling compatible with high connectivity, and provide direct spectroscopic measurements of ultra-strong coupling between qubits. Finally, we use our system to explore quantum annealing faster than the system thermalization time, a previously unaccessed regime.
Quantum annealing can potentially be used to find better solutions to hard optimization problems faster than purely classical hardware. To take full advantage of quantum effects such as tunneling, a physical annealer should be comprised of qubits with a sufficient degree of quantum coherence. In addition, to encode useful problems, an annealer should provide a dense physical connectivity graph between qubits. Towards these goals, we develop superconducting ``fluxmon'' flux qubits suitable for high-connectivity quantum annealing without the use of performance-degrading lossy dielectrics. We carry out in-depth studies of noise and dissipation, and of qubit-qubit coupling in the strongly nonlinear regime. We perform the first frequency-resolved measurements extracting both the quantum and classical parts of the 1/f flux noise intrinsic to superconducting devices, and observe the classical-to-quantum crossover of the noise. We also identify atomic hydrogen as a magnetic dissipation source. We then implement tunable inter-qubit coupling compatible with high connectivity, and provide direct spectroscopic measurements of ultra-strong coupling between qubits. Finally, we use our system to explore quantum annealing faster than the system thermalization time, a previously unaccessed regime.
Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence. Quantum annealers hold promise of outperforming classical computers in solving hard optimization problems, but one main challenge is understanding the role of noise in quantum annealing. Here, the authors characterize the relevant noise sources in a tunable flux qubit, a building block for quantum annealers, and provide a benchmark for future work on highly-coherent quantum annealers.
Quantum phenomena have the potential to speed up the solution of hard optimization problems. For example, quantum annealing, based on the quantum tunneling effect, has recently been shown to scale exponentially better with system size than classical simulated annealing. However, current realizations of quantum annealers with superconducting qubits face two major challenges. First, the connectivity between the qubits is limited, excluding many optimization problems from a direct implementation. Second, decoherence degrades the success probability of the optimization. We address both of these shortcomings and propose an architecture in which the qubits are robustly encoded in continuous variable degrees of freedom. By leveraging the phenomenon of flux quantization, all-to-all connectivity with sufficient tunability to implement many relevant optimization problems is obtained without overhead. Furthermore, we demonstrate the robustness of this architecture by simulating the optimal solution of a small instance of the nondeterministic polynomial-time hard (NP-hard) and fully connected number partitioning problem in the presence of dissipation.
The field of quantum information has been a fast growing field of research in the last few decades. The reason for this development is the potentially immense power of quantum computers, capable of solving hard problems in a fraction of the time it would take a classical computer. Quantum annealers are a type of quantum computer that seek to solve computational problems by finding the ground state of a quantum system. This type of quantum computer has been implemented on a large scale using superconducting flux quantum bits, but the computational power is limited. One potential improvement to help in this context is the implementation of multi-body interactions between quantum bits. Many-body interactions would be useful in allowing quantum annealers to solve more complex problems that are relevant in various areas of quantum information and science and implementing quantum error correction. \n \nWe present a superconducting device that implements a strong and tunable in sign and magnitude three-body interaction between superconducting flux quantum bits. The circuit design proposed has vanishing two-body interactions and robustness against noise and parameter variations. This circuit behaves as an ideal computational basis ZZZ coupler in a simulated three-qubit quantum annealing experiment. These properties are confirmed by calculations based on the Born-Oppenheimer approximation, a two-level spin model for the coupling circuit, and full numerical diagonalization. \n \nThe proposed circuit is based on already available technology and therefore could be readily implemented in the next generation of quantum annealing hardware. This work will be relevant for advanced quantum annealing protocols and future developments of high-order many-body interactions in quantum computers and simulators.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.
Abstract : Quantum annealing is a general strategy for solving difficult optimization problems with the aid of quantum adiabatic evolution [1, 2]. Both analytical and numerical evidence suggests that under idealized, closed system conditions, quantum annealing can outperform classical thermalization-based algorithms such as simulated annealing [3, 4]. Do engineered quantum annealing devices effectively perform classical thermalization when coupled to a decohering thermal environment? To address this we establish, using superconducting flux qubits with programmable spin-spin couplings, an experimental signature which is consistent with quantum annealing, and at the same time inconsistent with classical thermalization, in spite of a decoherence timescale which is orders of magnitude shorter than the adiabatic evolution time. This suggests that programmable quantum devices, scalable with current superconducting technology, implement quantum annealing with a surprising robustness against noise and imperfections.