Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Modeling of Superconducting Passive Transmission Lines

Paul le Roux, Kyle Jackman, Johannes A. Delport, Coenrad Johann Fourie

Published Mar 18, 2019• 13 citations
Publisher

Abstract

Superconducting technologies are moving toward very large-scale integration (VLSI) of circuits. Passive transmission lines (PTLs) are used to quickly and efficiently propagate single flux quantum pulses between separated logic elements of these VLSI circuits. PTLs are often insufficiently modeled to correspond to reality. Therefore, the PTL needs to be thoroughly studied to determine realistic propagation characteristics. A quasi-transverse magnetic (TM) formulation is used to study superconducting passive transmission lines. The ambient temperature and changes in penetration depth with frequency are taken into account when solving the electromagnetic fields of a PTL. Per-frequency transmission line parameters are extracted from the quasi-TM field solutions. The results show a very close correlation to TetraHenry, an existing 3D solver, at significantly reduced computational cost. The results also clearly show that PTL propagation characteristics are sensitive to frequency and temperature.

DOI
10.1109/tasc.2019.2902476

Related papers

Propagation of picosecond pulses on superconducting transmission line interconnects *

Vladimir V. Talanov, Derek Knee, David C. Harms +5 more

Abstract Interconnects are a major discriminator for superconducting digital technology, enabling energy-efficient data transfer and high-bandwidth heterogeneous integration. We report a method to simulate propagation of picosecond pulses in superconducting passive transmission lines (PTLs). A frequency-domain propagator model obtained from the Ansys high-frequency structure simulator (HFSS) field solver is incorporated in a Cadence Spectre circuit model, so that the particular PTL geometry can be simulated in the time-domain. The Mattis Bardeen complex conductivity of the superconductor is encoded in the HFSS field solver as a complex-conductivity insulator. Experimental and simulation results show that Nb 20 Ω microstrip PTLs with 200 nm interlayer dielectric thickness can support propagation of a single-flux-quantum pulse up to 7 mm and a double-flux-quantum pulse up to 28 mm.

arXiv:2104.07371•Superconductor Science and Technology•Feb 22, 2022•8 citations

Repeater Insertion in SFQ Interconnect

Tahereh Jabbari, Gleb Krylov, Stephen R. Whiteley +2 more

Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.

IEEE Transactions on Applied Superconductivity•Jun 9, 2020•58 citations

Optimization of Passive Transmission Lines for Single Flux Quantum Circuits

Benjamin Chonigman, Ashish Shukla, Mustapha Habib +6 more

Passive transmission lines (PTLs) provide an energy-efficient means of transporting pulsed single flux quantum (SFQ) signals between logic gates and blocks on a chip, or even between chips through a multi-chip module carrier. Although functional up to 70 GHz, our previous designs manifested sharp, length-dependent resonances resulting in diminished operating margins. These are particularly inconvenient since the resonant length is about 1 mm at 40–50 GHz, where most SFQ circuits currently function. To avoid the need to keep the PTLs < 1 mm in length, we have optimized the PTL driver-receiver pairs to sufficiently suppress these resonances; this helps facilitate the use of automated routing tools. We present experimental results, in the 10-70 GHz frequency range, for different driver-receiver pairs designed for PTLs in our dual RSFQ-ERSFQ cell library. This cell library, targeting MIT Lincoln Laboratory's SFQ5ee fabrication process, uses PTLs with two types of ground plane configuration. The first variant has signal in M1 and/or M3 with symmetrical ground planes in M0, M2 and/or M2, M4 respectively. The second variant has signal in M2 and/or M3 with asymmetrical ground planes in M1 and M4. We also present a comparison with wider, 4 Ω, PTLs that are more suitable for transport between distant logic blocks. Next, we present experimental results of PTL lengths ranging from 1.2-12 mm over the same 10-70 GHz frequency range. Finally, we report on the design of circuits for investigating crosstalk between two PTLs and their measurement results.

IEEE Transactions on Applied Superconductivity•Feb 26, 2021•14 citations

Design of Passive Transmission Line by Adjusting Intrinsic Parameters of Josephson Junctions

Xi Gao, Minghui Niu, Xiaoping Gao +5 more

Along with the improvement of integration and the requirement of high-speed operation, the passive transmission line (PTL) plays a significant role in superconducting integrated circuits due to its intrinsic advantage of extremely low propagation delay and low signal loss in long-distance transmission. Good impedance matching is critical to reduce the signal reflection in the transmission line and maximize the power transferred. Based on the PTL wiring layer selection under SIMIT-Nb03 process, we studied the equivalent input/output impedance for Josephson junction (JJ) at the IO port and explored a method of impedance matching in rapid-single-flux-quantum circuits by adjusting the Stewart McCumber parameter${\beta }_{\bm{C}}$of the JJ in the design of the PTL's driver and receiver. Furthermore, the accompanying influence from JJ's modified${\beta }_{\bm{C}}$on the performance of the driver and receiver is evaluated to maximize the profit of the functional circuits. The common-used serial resistor is removed to obtain a balanced bias margin for the PTL circuits. The proposed PTL has been designed and tested based on SIMIT-Nb03 fabrication process. In total,$ \pm $30% bias margin for the PTL is achieved at low frequency and high frequency (40 GHz) contrast tests, including operation speed and transmission length as test vector. Additionally, a frequency sweep for 1 mm PTL is performed by the designed ring oscillator on the chip. The maximum working frequency is up to 129 GHz, with a margin duration of 8%.

IEEE Transactions on Applied Superconductivity•May 22, 2023•3 citations

Models of superconducting coplanar transmission lines

Sasan Razmkhah, Pascal Febvre, Kyle Jackman +1 more

The objective of this work is to develop compact models of PTLs to perform fast simulations of SFQ pulse propagation along PTLs. We focus here on coplanar PTLs.The first step was to find accurate analytical models that match results obtained by 2.5D and 3D numerical solvers.These models are adapted to take into account the behaviour up to THz frequencies, above the superconductor gap.

•Jul 28, 2019•0 citations

Development of Passive Interconnection Technology for SFQ Circuits

Yoshihito Hashimoto

To enable the use of passive transmission lines (PTLs) for the interconnection of single-flux-quantum (SFQ) circuits, we have implemented a driver and a receiver and have developed a method for designing SFQ circuits with passive interconnections. Basic components and properties of passive interconnections, such as the frequency characteristics of the driver and receiver, the PTL delay, and the crosstalk between PTLs, have been experimentally verified. Our developed components and design method have been applied to actual SFQ circuits, such as a 4 x 4 switch having block-to-block passive interconnections and a 2 x 2 switch having gate-to-gate passive interconnections. We have also shown the advantages of PTLs over Josephson transmission lines (JTLs). We also discuss the prospects of SFO circuits having passive interconnections.

IEICE Transactions on Electronics•Feb 1, 2005•17 citations
Superconducting technologies are moving toward very large-scale integration (VLSI) of circuits. Passive transmission lines (PTLs) are used to quickly and efficiently propagate single flux quantum pulses between separated logic elements of these VLSI circuits. PTLs are often insufficiently modeled to correspond to reality. Therefore, the PTL needs to be thoroughly studied to determine realistic propagation characteristics. A quasi-transverse magnetic (TM) formulation is used to study superconducting passive transmission lines. The ambient temperature and changes in penetration depth with frequency are taken into account when solving the electromagnetic fields of a PTL. Per-frequency transmission line parameters are extracted from the quasi-TM field solutions. The results show a very close correlation to TetraHenry, an existing 3D solver, at significantly reduced computational cost. The results also clearly show that PTL propagation characteristics are sensitive to frequency and temperature.
Abstract Interconnects are a major discriminator for superconducting digital technology, enabling energy-efficient data transfer and high-bandwidth heterogeneous integration. We report a method to simulate propagation of picosecond pulses in superconducting passive transmission lines (PTLs). A frequency-domain propagator model obtained from the Ansys high-frequency structure simulator (HFSS) field solver is incorporated in a Cadence Spectre circuit model, so that the particular PTL geometry can be simulated in the time-domain. The Mattis Bardeen complex conductivity of the superconductor is encoded in the HFSS field solver as a complex-conductivity insulator. Experimental and simulation results show that Nb 20 Ω microstrip PTLs with 200 nm interlayer dielectric thickness can support propagation of a single-flux-quantum pulse up to 7 mm and a double-flux-quantum pulse up to 28 mm.
Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.
Passive transmission lines (PTLs) provide an energy-efficient means of transporting pulsed single flux quantum (SFQ) signals between logic gates and blocks on a chip, or even between chips through a multi-chip module carrier. Although functional up to 70 GHz, our previous designs manifested sharp, length-dependent resonances resulting in diminished operating margins. These are particularly inconvenient since the resonant length is about 1 mm at 40–50 GHz, where most SFQ circuits currently function. To avoid the need to keep the PTLs < 1 mm in length, we have optimized the PTL driver-receiver pairs to sufficiently suppress these resonances; this helps facilitate the use of automated routing tools. We present experimental results, in the 10-70 GHz frequency range, for different driver-receiver pairs designed for PTLs in our dual RSFQ-ERSFQ cell library. This cell library, targeting MIT Lincoln Laboratory's SFQ5ee fabrication process, uses PTLs with two types of ground plane configuration. The first variant has signal in M1 and/or M3 with symmetrical ground planes in M0, M2 and/or M2, M4 respectively. The second variant has signal in M2 and/or M3 with asymmetrical ground planes in M1 and M4. We also present a comparison with wider, 4 Ω, PTLs that are more suitable for transport between distant logic blocks. Next, we present experimental results of PTL lengths ranging from 1.2-12 mm over the same 10-70 GHz frequency range. Finally, we report on the design of circuits for investigating crosstalk between two PTLs and their measurement results.
Along with the improvement of integration and the requirement of high-speed operation, the passive transmission line (PTL) plays a significant role in superconducting integrated circuits due to its intrinsic advantage of extremely low propagation delay and low signal loss in long-distance transmission. Good impedance matching is critical to reduce the signal reflection in the transmission line and maximize the power transferred. Based on the PTL wiring layer selection under SIMIT-Nb03 process, we studied the equivalent input/output impedance for Josephson junction (JJ) at the IO port and explored a method of impedance matching in rapid-single-flux-quantum circuits by adjusting the Stewart McCumber parameterβC{\beta }_{\bm{C}}βC​of the JJ in the design of the PTL's driver and receiver. Furthermore, the accompanying influence from JJ's modifiedβC{\beta }_{\bm{C}}βC​on the performance of the driver and receiver is evaluated to maximize the profit of the functional circuits. The common-used serial resistor is removed to obtain a balanced bias margin for the PTL circuits. The proposed PTL has been designed and tested based on SIMIT-Nb03 fabrication process. In total,$ \pm $30% bias margin for the PTL is achieved at low frequency and high frequency (40 GHz) contrast tests, including operation speed and transmission length as test vector. Additionally, a frequency sweep for 1 mm PTL is performed by the designed ring oscillator on the chip. The maximum working frequency is up to 129 GHz, with a margin duration of 8%.
To enable the use of passive transmission lines (PTLs) for the interconnection of single-flux-quantum (SFQ) circuits, we have implemented a driver and a receiver and have developed a method for designing SFQ circuits with passive interconnections. Basic components and properties of passive interconnections, such as the frequency characteristics of the driver and receiver, the PTL delay, and the crosstalk between PTLs, have been experimentally verified. Our developed components and design method have been applied to actual SFQ circuits, such as a 4 x 4 switch having block-to-block passive interconnections and a 2 x 2 switch having gate-to-gate passive interconnections. We have also shown the advantages of PTLs over Josephson transmission lines (JTLs). We also discuss the prospects of SFO circuits having passive interconnections.