Quantum Optics
Single-photon emitters are of interest for many applications, such as quantum sensing and quantum secure communication. Although efficient on-demand solid-state sources based on quantum dots, defect color centers in diamond, and single molecules are available, most of these systems require cryogenic temperatures for optimal performance. Ripka et al. used a cloud of warm excited rubidium atoms confined to a gas cell and exploited the exaggerated interaction of Rydberg states to generate single photons on demand. The results demonstrate the viability of atomic gases for application in the development of quantum technologies.
Science , this issue p. [446][1]
[1]: /lookup/doi/10.1126/science.aau1949
Quantum Optics
Single-photon emitters are of interest for many applications, such as quantum sensing and quantum secure communication. Although efficient on-demand solid-state sources based on quantum dots, defect color centers in diamond, and single molecules are available, most of these systems require cryogenic temperatures for optimal performance. Ripka et al. used a cloud of warm excited rubidium atoms confined to a gas cell and exploited the exaggerated interaction of Rydberg states to generate single photons on demand. The results demonstrate the viability of atomic gases for application in the development of quantum technologies.
Due to their quantum nature, single-photon emitters (SPE) generate individual photons in bursts or streams. They are paramount in emerging quantum technologies such as quantum key distribution, quantum repeaters, and measurement-based quantum computing. Many such systems have been reported in the last three decades, from rubidium atoms coupled to cavities to semiconductor quantum dots and color centers implanted in waveguides. This review article highlights different solid-state and atomic systems with on-demand and controlled single-photon generation. We discuss and compare the performance metrics, such as purity and indistinguishability, for these sources and evaluate their potential for different applications. Finally, a new potential single-photon source, based on the Rydberg exciton in solid-state metal oxide thin films, is introduced, where we discuss its promising features and unique advantages in fabricating quantum chips for quantum photonic applications.
Due to their quantum nature, single-photon emitters generate individual photons in bursts or streams. They are paramount in emerging quantum technologies such as quantum key distribution, quantum repeaters, and measurement-based quantum computing. Many such systems have been reported in the last three decades, from Rubidium atoms coupled to cavities to semiconductor quantum dots and color centers implanted in waveguides. This review article highlights different material systems with deterministic and controlled single photon generation. We discuss and compare the performance metrics, such as purity and indistinguishability, for these sources and evaluate their potential for different applications. Finally, a new potential single-photon source, based on the Rydberg exciton in solid state metal oxide thin films, is introduced, briefly discussing its promising qualities and advantages in fabricating quantum chips for quantum photonic applications.
Photonic quantum devices based on atomic vapors at room temperature combine the advantages of atomic vapors being intrinsically reproducable as well as semiconductor-based concepts being scalable and integrable. One key device in the field of quantum information are on-demand single-photon sources. Comparable to similar realizations using cold atoms [1], it has been supposed to realize room-temperature single-photon sources by combining the two effects of four-wave mixing and Rydberg blockade [2]. Driving the four-wave mixing cycles in a pulsed manner, single photons are generated on demand. The essential conditions of coherence [3,4] and sufficient Rydberg-Rydberg interaction strengths [5] have already been demonstrated. Up to now, the third condition has been missing: That is performing the excitation cycles in a low-dimensional geometry in order to obtain an excitation blockade of the whole volume by only one Rydberg excitation. We realize this spatial confinement in transversal direction by focusing one of the excitation beams by means of a high-NA lens, and in longitudinal direction by using vapor cells of about one micrometer inner thickness (“µ-cells”). In order to deal with reasonable numbers of atoms in such a small volume, we exploit the fact that in thermal equilibrium there are large numbers of adsorbed atoms on the glass surface. We can easily photo-desorb them shortly before the four-wave mixing cycles and increase by this the optical thickness in the excitation volume by one order of magnitude. By means of these techniques we are now able to generate single photons at 780nm. With a Rydberg blockade radius of 1.0µm and a cell thickness of 1.2µm, we observe pure anti-bunching in the light statistics of the coherent emission field, deviating with a significance of three standard deviations from Poisson-type statistics. We obtain generation efficiencies of currently up to 5% per four-wave mixing cycle, depending on experimental parameters. We systematically investigate the disappearance of the anti-bunching by increasing the cell thickness. The results are also compared to measurements at smaller blockade radii. This technique can be further improved by investigating different Rydberg states or different multi-level schemes which allow exploiting the latest developments in laser research. [1] Y. O. Dudin et al., Science 336, 6083 (2012) [2] M. M. Müller et al., PRA 87, 053412 (2013) [3] B. Huber et al., PRL 107, 243001 (2011) [4] B. Huber et al., PRA 90, 053806 (2014) [5] T. Baluktsian et al., PRL 110, 123001 (2013)
The exploitation of emerging quantum technologies requires efficient fabrication of key building blocks. Sources of single photons are extremely important across many applications as they can serve as vectors for quantum information—thereby allowing long-range (perhaps even global-scale) quantum states to be made and manipulated for tasks such as quantum communication or distributed quantum computation. At the single-emitter level, quantum sources also afford new possibilities in terms of nanoscopy and bio-marking. Color centers in diamond are prominent candidates to generate and manipulate quantum states of light, as they are a photostable solid-state source of single photons at room temperature. In this review, we discuss the state of the art of diamond-based single-photon emitters and highlight their fabrication methodologies. We present the experimental techniques used to characterize the quantum emitters and discuss their photophysical properties. We outline a number of applications including quantum key distribution, bio-marking and sub-diffraction imaging, where diamond-based single emitters are playing a crucial role. We conclude with a discussion of the main challenges and perspectives for employing diamond emitters in quantum information processing.
Quantum Optics
The development of many optical quantum technologies is dependent on the availability of solid-state single quantum emitters with near-perfect optical coherence. Light-emitting defects in diamond and quantum dots grown by molecular beam epitaxy have demonstrated transform-limited emission linewidths. However, they are limited in terms of production scalability and reproducibility between individual emitters. Utzat et al. now show that perovskite quantum dots can overcome these limitations and provide unprecedented versatility for the generation of indistinguishable single photons or entangled photon pairs for quantum information processing.
Science , this issue p. [1068][1]
[1]: /lookup/doi/10.1126/science.aau7392
Quantum communication and quantum metrology established a demand for an accessible solid state systems which can generate a stream of single photons on demand [1]. Although single photon emission has been demonstrated from quantum dots (QD)[1,2], single molecules [3] and nanowires [4], their practical operation is limited by the temperature or photostability. Diamond crystals, however, are the most promising platform for generation of robust, photo-stable, single photons at room temperature [5,6]. Nevertheless, out of more than 500 existing optical centers in diamond only three known centers demonstrated a clear single photon emission: the nitrogen-vacancy complex [6,7], the silicon-vacancy complex [8] and the nickel-nitrogen complex [9,10]. Recent progress in materials science and fabrication techniques of diamond color centers unveiled novel quantum emitters with photo-physical properties surpassing the current mainstream [11,12,13]. Consequently, the versatility of the diamond lattice to host various impurities which give luminescence signals lead to a dramatic discovery of ultra bright single photon emitters operating in the MHz regime [14]. These new centers, comparable with QD in terms of brightness [1], but have the tremendous advantage of their room temperature operation and photo-stability. Furthermore, it opened a new avenue to investigate essentially an unknown group of single photon emitters. A brief description of the fabrication methods and a detailed quantum optical characterization of this class of diamond emitters is the subject of this presentation. In particular we will present the photo-physical properties of a novel family of single photon emitters, most likely originated from Cr impurities within the chemical vapor deposition grown nano-diamond crystals. We concentrate on the typical emission lines in the range of 740 - 790 nm, which exhibit single photon emission with count rate in the range of 0.8-3.2 106 counts/s at the limit of infinite optical excitation power, and life time as short as 1 ns. Even more, some of the emitters exhibit a photon statistics without any photon bunching, indicating a two-level system with unitary quantum efficiency. We will also show preliminary results of a resonant excitation at 4 K. We will highlight future directions to optimize these sources and avenues to investigate the fundamental properties of these centers.