Quantum computers have the capability to improve the efficiency and speed of many computational tasks. Among different candidates for physical implementation of quantum bits (qubits), superconducting qubits are currently one of the most promising candidates due to their accessible fabrication process and recent rapid developments. Measurement of these qubits is usually done in a circuit quantum electrodynamics (QED) setup, for which experimental and theoretical research is conducted to improve the accuracy and speed of the qubit readout. In this dissertation we study some aspects of the dispersive readout of superconducting qubits, and introduce tools and methods for studying these systems.In Chapter 2 we show that in presence of neighboring qubits, the system is typically measured in the basis of joint eigenstates of qubits, in contrast to what is expected from the textbook collapse postulate. In such setups, the excitation can switch between the eigenstates, leading to measurement error. In Chapter 3 we study the joint state of the qubit-resonator system during the measurement, and show that the qubit-induced nonlinearity of the resonator squeezes its state, and within the rotating wave approximation (RWA) the system mostly remains in the joint eigenladder that is associated with the qubit's initial state. In Chapter 4 we show that built-in energy resonances in the qubit-resonator Jaynes-Cummings ladder occur at specific resonator populations, and the couplings between these resonant levels are provided by the usually neglected non-RWA terms. Such resonances lead to measurement deterioration by exciting the qubit out of the computational subspace. In Chapter 5 we provide a hybrid phase-space-Fock-space approach for studying the evolution and squeezing of driven nonlinear resonators within Gaussian approximation, which is numerically efficient and sufficiently accurate. In Chapter 6 we study the propagating squeezed field that leaks out of the resonator, and write evolution equations for the correlators of the measured field quadrature. These equations are easy to simulate and can describe the squeezing of the propagating field during the transient, which can be used to optimize the fidelity and speed of the quadrature measurement in the dispersive readout of superconducting qubits.
Quantum computers have the capability to improve the efficiency and speed of many computational tasks. Among different candidates for physical implementation of quantum bits (qubits), superconducting qubits are currently one of the most promising candidates due to their accessible fabrication process and recent rapid developments. Measurement of these qubits is usually done in a circuit quantum electrodynamics (QED) setup, for which experimental and theoretical research is conducted to improve the accuracy and speed of the qubit readout. In this dissertation we study some aspects of the dispersive readout of superconducting qubits, and introduce tools and methods for studying these systems.In Chapter 2 we show that in presence of neighboring qubits, the system is typically measured in the basis of joint eigenstates of qubits, in contrast to what is expected from the textbook collapse postulate. In such setups, the excitation can switch between the eigenstates, leading to measurement error. In Chapter 3 we study the joint state of the qubit-resonator system during the measurement, and show that the qubit-induced nonlinearity of the resonator squeezes its state, and within the rotating wave approximation (RWA) the system mostly remains in the joint eigenladder that is associated with the qubit's initial state. In Chapter 4 we show that built-in energy resonances in the qubit-resonator Jaynes-Cummings ladder occur at specific resonator populations, and the couplings between these resonant levels are provided by the usually neglected non-RWA terms. Such resonances lead to measurement deterioration by exciting the qubit out of the computational subspace. In Chapter 5 we provide a hybrid phase-space-Fock-space approach for studying the evolution and squeezing of driven nonlinear resonators within Gaussian approximation, which is numerically efficient and sufficiently accurate. In Chapter 6 we study the propagating squeezed field that leaks out of the resonator, and write evolution equations for the correlators of the measured field quadrature. These equations are easy to simulate and can describe the squeezing of the propagating field during the transient, which can be used to optimize the fidelity and speed of the quadrature measurement in the dispersive readout of superconducting qubits.
The potential of superconducting qubits as the medium for a scalable quantum computer has motivated the pursuit of improved interactions within this system. Two challenges for the field of superconducting qubits are measurement fidelity, to accurately determine the state of the qubit, and the efficient transfer of quantum states. In measurement, the current state-of-the-art method employs dispersive readout, by coupling the qubit to a cavity and reading the resulting shift in cavity frequency to infer the qubit's state; however, this is vulnerable to Purcell relaxation, as well as being modeled off a simplified two-level abstraction of the qubit. In state transfer, the existing proposal for moving quantum states is mostly untested against non-idealities that will likely be present in an experiment. In this dissertation, we examine three problems within these two areas.We first describe a new scheme for fast and high-fidelity dispersive measurement specifically designed to circumvent the Purcell Effect. To do this, the qubit-resonator interaction is turned on only when the resonator is decoupled from the environment; then, after the resonator state has shifted enough to infer the qubit state, the qubit-resonator interaction is turned off before the resonator and environment are recoupled. We also show that the effectiveness of this ``Catch-Disperse-Release'' procedure partly originates from quadrature squeezing of the resonator state induced by the Jaynes-Cummings nonlinearity.The Catch-Disperse-Release measurement scheme treats the qubit as a two-level system, which is a common simplification used in theoretical works. However, the most promising physical candidate for a superconducting qubit, the transmon, is a multi-level system. In the second work, we examine the effects of including the higher energy levels of the transmon. Specifically, we expand the eigenstate picture developed in the first work to encompass multiple qubit levels, and examine the resulting changes to the system. In particular, we analyze the population of the non-target eigenstates as a result of this expanded model, and provide an analytical form for these deviations from the simpler model in Catch-Disperse-Release (i.e., the dressed state approximation).Lastly, we assess the robustness of the existing quantum state transfer protocol, testing its performance under typical experimental deviations from the ideal case. We show that the procedure is resilient to almost all non-idealities, except frequency mismatch between the two cavities. We also demonstrate a method to compensate for one such error in frequency-matching.
Many superconducting qubit systems use the dispersive interaction between the qubit and a coupled harmonic resonator to perform quantum state measurement. Previous works have found that such measurements can induce state transitions in the qubit if the number of photons in the resonator is too high. We investigate these transitions and find that they can push the qubit out of the two-level subspace, and that they show resonant behavior as a function of photon number. We develop a theory for these observations based on level crossings within the Jaynes-Cummings ladder, with transitions mediated by terms in the Hamiltonian that are typically ignored by the rotating wave approximation. We find that the most important of these terms comes from an unexpected broken symmetry in the qubit potential. We confirm the theory by measuring the photon occupation of the resonator when transitions occur while varying the detuning between the qubit and resonator.
Using circuit QED, we consider the measurement of a superconducting transmon qubit via a coupled microwave resonator. For ideally dispersive coupling, ringing up the resonator produces coherent states with frequencies matched to transmon energy states. Realistic coupling is not ideally dispersive, however, so transmon-resonator energy levels hybridize into joint eigenstate ladders of the Jaynes--Cummings type. Previous work has shown that ringing up the resonator approximately respects this ladder structure to produce a coherent state in the eigenbasis (a dressed coherent state). We numerically investigate the validity of this coherent-state approximation to find two primary deviations. First, resonator ring-up leaks small stray populations into eigenstate ladders corresponding to different transmon states. Second, within an eigenstate ladder the transmon nonlinearity shears the coherent state as it evolves. We then show that the next natural approximation for this sheared state in the eigenbasis is a dressed squeezed state and derive simple evolution equations for such states by using a hybrid phase--Fock-space description.
The quantum state of a superconducting qubit nonresonantly coupled to a transmission line resonator can be determined by measuring the quadrature amplitudes of an electromagnetic field transmitted through the resonator. We present experiments in which we analyze in detail the dynamics of the transmitted field as a function of the measurement frequency for both weak continuous and pulsed measurements. We find excellent agreement between our data and calculations based on a set of Bloch-type differential equations for the cavity field derived from the dispersive Jaynes-Cummings Hamiltonian including dissipation. We show that the measured system response can be used to construct a measurement operator from which the qubit population can be inferred accurately. Such a measurement operator can be used in tomographic methods to reconstruct single and multiqubit states in ensemble-averaged measurements.
Dispersive readout, the current standard for measuring superconducting qubits, relies on relatively easy to engineer, static transverse coupling between a qubit and a detuned cavity mode. However, this method requires circuit design trade-offs between qubit-cavity coupling, cavity-feedline coupling, detuning, and the resultant decoherence introduced by the cavity mode. Additionally, the criteria for performing quantum nondemolition measurements, including reduced cavity photon numbers, further limits speed and fidelity. In this work, we introduce a circuit with pulse-tunable qubit-cavity and cavity-feedline couplings so that the entire qubit-measurement process can be fully optimized. Here, the core measurement process resembles a quantum gate operation between the qubit and the cavity, with the cavity acting like an ancilla, storing the qubit-state information. To fully explore time-dependent effects of the full qubit-cavity dynamics, we go beyond the rotating-wave, Jaynes-Cummings, or dispersive approximations, to develop a pulsed-measurement protocol. In addition, we propose a realistic circuit architecture that can provide a very fast, high-fidelity, QND measurement with near-unit efficiency.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.