Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering

Experimental evaluation of the current‐phase relation of a Josephson junction

Olaf Wetzstein, Thomas Ortlepp, Hermann F. Uhlmann, Hannes Toepfer

Published Jul 12, 2011• 1 citation
Publisher

Abstract

Purpose Josephson junctions act as active elements in superconducting electronics. The behavior of this nonlinear element is characterized by the relation between current and the quantum mechanical phase‐difference. For an accurate device modeling, detailed knowledge about this relation is necessary. This paper aims to discuss these issues. Design/methodology/approach To obtain detailed information, a method for DC measurement of the current‐phase relation suitable for all kinds of superconducting circuit elements was accomplished. Findings The authors developed a linear transformation algorithm to calculate the current‐phase relation from the measured data. Research limitations/implications It turns out that in future designs additional connections and special test structures are required to gain more knowledge about inductance values required for the algorithm. Originality/value Based on the inverse calculation of that algorithm, the authors found a 7 percent deviation of the current‐phase relation of a standard superconductor/insulator/superconductor Josephson junction from the predicted sine‐wave behavior. Furthermore, the paper suggests to use this method to evaluate the current‐phase relation of new Josephson elements such as a superconductor/ferromagnet/superconductor junction. Therefore, the authors will deposit the new element directly on the chip with the test setup fabricated with standard Nb‐technology.

DOI
10.1108/03321641111133280

Related papers

Experimental evaluation of the current-phase relation of a Josephson junction

Olaf Mielke, Thomas Ortlepp, Hermann F. Uhlmann +1 more

Josephson junctions act as active elements in superconducting electronics. The behavior of this nonlinear element is characterized by the relation between current and the quantum mechanical phase-difference. For an accurate device modeling detailed knowledge about this relation is necessary. To obtain detailed information, a method for direct measurement of the current-phase relation of different types of Josephson junctions was accomplished.

•Jun 22, 2009•0 citations

Harmonic current-phase relation in Nb–Al-based superconductor/insulator/normal conductor/insulator/superconductor-type Josephson junctions between 4.2 K and the critical temperature

Martin Götz, Vladimir V. Khanin, H. Schulze +6 more

For a study of the supercurrent–phase relationship, we have fabricated Nb/Al/AlOx/Al/AlOx/Al/Nb-based Josephson junctions of low critical current density. At 4.2 K, junctions of a nominal area of 10×10 μm2 showed a nonhysteretic dc current–voltage characteristic with a critical current of about 10 μA. Similar junctions were part of washer-type rf superconductor quantum interference devices. These samples were inductively coupled to high-quality tank circuits for measurements at 4.2 K or at higher temperatures up to values close to the critical temperature of niobium. In this range, the current–phase relation, as deduced from impedance measurements of the phase-biased junction, did not deviate significantly from the sinusoidal shape.

Applied Physics Letters•Aug 28, 2000•5 citations

Numerical analysis of dynamical behavior in Josephson junctions with non-sinusoidal current-phase relations

Liangliang Yang, HE Kaiyong, Genting Dai +5 more

Josephson junction, as the core nonlinear element underpinning superconducting electronics, is characterized by its current-phase relation (CPR), which fundamentally determines the dynamical properties and functional capabilities of superconducting quantum devices. Traditional Josephson junctions typically exhibit a traditional sinusoidal CPR; however, the junctions characterized by non-sinusoidal CPR have recently attracted considerable attention due to their distinctive physical properties and promising quantum device applications. In this work, a numerical model tailored specifically for junctions exhibiting non-sinusoidal CPR is developed by integrating experimentally measured current-voltage (I-V ) characteristics from Nb/Al-AlOx/Nb junctions into a resistively and capacitively shunted junction (RCSJ) framework. By leveraging this refined model, the influence of CPR skewness on Josephson junction dynamics is systematically investigated. Our results indicate that in underdamped junctions, the critical current significantly diminishes with the increase of CPR skewness, a behavior reminiscent of the adjustable critical currents typically observed in DC superconducting quantum interference devices (SQUIDs). Conversely, in overdamped junctions, the influence of CPR skewness on the I-V characteristics is found to be negligible. However, our numerical simulations under microwave irradiation indicate that nonsinusoidal CPRs readily promote the emergence of half-integer Shapiro steps in overdamped junctions, thereby establishing CPR skewness as a plausible microscopic origin for this phenomenon. In addition, the advanced design system (ADS) simulations is employed to model nonlinear resonators and DC SQUID circuits, offering a detailed investigation into how nonsinusoidal CPRs modulate the Josephson inductance and magnetic flux response. Our findings reveal that engineering the CPR of Josephson junctions provides substantial flexibility in the design of superconducting qubits, parametric amplifiers, and non-magnetic nonreciprocal devices. This tunability underscores significant opportunities for developing next-generation superconducting electronic components. The Josephson junctions with engineered CPR offer expanded functionality for superconducting quantum technologies. This study suggests that customized CPR can enhance control over the dynamical behavior of junctions, and promote the optimized designs of superconducting qubits, parametric amplifiers, and nonmagnetic nonreciprocal devices.

Acta Physica Sinica•Jan 1, 2025•0 citations

The current-phase relation in Josephson junctions

A. A. Golubov, M. Yu. Kupriyanov, Evgeni V. Il’ichev

This review provides a theoretical basis for understanding the current-phase relation (C\ensuremath{\Phi}R) for the stationary (dc) Josephson effect in various types of superconducting junctions. The authors summarize recent theoretical developments with an emphasis on the fundamental physical mechanisms of the deviations of the C\ensuremath{\Phi}R from the standard sinusoidal form. A new experimental tool for measuring the C\ensuremath{\Phi}R is described and its practical applications are discussed. The method allows one to measure the electrical currents in Josephson junctions with a small coupling energy as compared to the thermal energy. A number of examples illustrate the importance of the C\ensuremath{\Phi}R measurements for both fundamental physics and applications.

Reviews of Modern Physics•Apr 26, 2004•1,427 citations

Improving Josephson junction reproducibility for superconducting quantum circuits: junction area fluctuation

Anastasiya A. Pishchimova, Nikita S. Smirnov, Daria A. Moskaleva +6 more

Abstract Josephson superconducting qubits and parametric amplifiers are prominent examples of superconducting quantum circuits that have shown rapid progress in recent years. As such devices become more complex, the requirements for reproducibility of their electrical properties across a chip are being tightened. Critical current of the Josephson junction Ic is the essential electrical parameter in a chip. So, its variation is to be minimized. According to the Ambegaokar–Baratoff formula, critical current is related to normal-state resistance, which can be measured at room temperature. In this study, we focused on the dominant source of non-uniformity for the Josephson junction critical current–junction area variation. We optimized Josephson junction fabrication process and demonstrated resistance variation of 9.8–4.4% and 4.8–2.3% across 22 × 22 mm2 and 5 × 10 mm2 chip areas, respectively. For a wide range of junction areas from 0.008 to 0.12 μm2, we ensure a small linewidth standard deviation of 4 nm measured over 4500 junctions with linear dimensions from 80 to 680 nm. We found that the dominate source of junction area variation limiting $${\mathrm{I}}_{\mathrm{c}}$$ I c reproducibility is the imperfection of the evaporation system. The developed fabrication process was tested on superconducting highly coherent transmon qubits (T1 > 100 μs) and a nonlinear asymmetric inductive element parametric amplifier.

arXiv:2210.15293•Scientific Reports•Apr 25, 2023•39 citations

Current-Phase Relations of Superconducting PtSi Constriction Josephson Junctions

Tharanga Nanayakkara, Anthony T. Bollinger, Kevin Musick +5 more

We study the current-phase relations of superconductor-constriction-superconductor Josephson junctions made from platinum silicide thin films by fabricating dc-superconducting quantum interference devices incorporating pairs of junctions and measuring their magnetic-field-dependent electrical transport. By comparing the supercurrent interference patterns with numerical Ginzburg-Landau simulations, we extract the current-phase relations of individual junctions and quantify the degree of nonlinearity. These measurements show that while the constrictions themselves sustain substantial nonlinearity, the effect is moderated by the kinetic inductance of the device leads, which is an important consideration for practical superconducting circuit applications.

Nano Letters•Jan 6, 2026•1 citation
Purpose Josephson junctions act as active elements in superconducting electronics. The behavior of this nonlinear element is characterized by the relation between current and the quantum mechanical phase‐difference. For an accurate device modeling, detailed knowledge about this relation is necessary. This paper aims to discuss these issues. Design/methodology/approach To obtain detailed information, a method for DC measurement of the current‐phase relation suitable for all kinds of superconducting circuit elements was accomplished. Findings The authors developed a linear transformation algorithm to calculate the current‐phase relation from the measured data. Research limitations/implications It turns out that in future designs additional connections and special test structures are required to gain more knowledge about inductance values required for the algorithm. Originality/value Based on the inverse calculation of that algorithm, the authors found a 7 percent deviation of the current‐phase relation of a standard superconductor/insulator/superconductor Josephson junction from the predicted sine‐wave behavior. Furthermore, the paper suggests to use this method to evaluate the current‐phase relation of new Josephson elements such as a superconductor/ferromagnet/superconductor junction. Therefore, the authors will deposit the new element directly on the chip with the test setup fabricated with standard Nb‐technology.
For a study of the supercurrent–phase relationship, we have fabricated Nb/Al/AlOx/Al/AlOx/Al/Nb-based Josephson junctions of low critical current density. At 4.2 K, junctions of a nominal area of 10×10 μm2 showed a nonhysteretic dc current–voltage characteristic with a critical current of about 10 μA. Similar junctions were part of washer-type rf superconductor quantum interference devices. These samples were inductively coupled to high-quality tank circuits for measurements at 4.2 K or at higher temperatures up to values close to the critical temperature of niobium. In this range, the current–phase relation, as deduced from impedance measurements of the phase-biased junction, did not deviate significantly from the sinusoidal shape.
Josephson junction, as the core nonlinear element underpinning superconducting electronics, is characterized by its current-phase relation (CPR), which fundamentally determines the dynamical properties and functional capabilities of superconducting quantum devices. Traditional Josephson junctions typically exhibit a traditional sinusoidal CPR; however, the junctions characterized by non-sinusoidal CPR have recently attracted considerable attention due to their distinctive physical properties and promising quantum device applications. In this work, a numerical model tailored specifically for junctions exhibiting non-sinusoidal CPR is developed by integrating experimentally measured current-voltage (I-V ) characteristics from Nb/Al-AlOx/Nb junctions into a resistively and capacitively shunted junction (RCSJ) framework. By leveraging this refined model, the influence of CPR skewness on Josephson junction dynamics is systematically investigated. Our results indicate that in underdamped junctions, the critical current significantly diminishes with the increase of CPR skewness, a behavior reminiscent of the adjustable critical currents typically observed in DC superconducting quantum interference devices (SQUIDs). Conversely, in overdamped junctions, the influence of CPR skewness on the I-V characteristics is found to be negligible. However, our numerical simulations under microwave irradiation indicate that nonsinusoidal CPRs readily promote the emergence of half-integer Shapiro steps in overdamped junctions, thereby establishing CPR skewness as a plausible microscopic origin for this phenomenon. In addition, the advanced design system (ADS) simulations is employed to model nonlinear resonators and DC SQUID circuits, offering a detailed investigation into how nonsinusoidal CPRs modulate the Josephson inductance and magnetic flux response. Our findings reveal that engineering the CPR of Josephson junctions provides substantial flexibility in the design of superconducting qubits, parametric amplifiers, and non-magnetic nonreciprocal devices. This tunability underscores significant opportunities for developing next-generation superconducting electronic components. The Josephson junctions with engineered CPR offer expanded functionality for superconducting quantum technologies. This study suggests that customized CPR can enhance control over the dynamical behavior of junctions, and promote the optimized designs of superconducting qubits, parametric amplifiers, and nonmagnetic nonreciprocal devices.
This review provides a theoretical basis for understanding the current-phase relation (C\ensuremath{\Phi}R) for the stationary (dc) Josephson effect in various types of superconducting junctions. The authors summarize recent theoretical developments with an emphasis on the fundamental physical mechanisms of the deviations of the C\ensuremath{\Phi}R from the standard sinusoidal form. A new experimental tool for measuring the C\ensuremath{\Phi}R is described and its practical applications are discussed. The method allows one to measure the electrical currents in Josephson junctions with a small coupling energy as compared to the thermal energy. A number of examples illustrate the importance of the C\ensuremath{\Phi}R measurements for both fundamental physics and applications.
Abstract Josephson superconducting qubits and parametric amplifiers are prominent examples of superconducting quantum circuits that have shown rapid progress in recent years. As such devices become more complex, the requirements for reproducibility of their electrical properties across a chip are being tightened. Critical current of the Josephson junction Ic is the essential electrical parameter in a chip. So, its variation is to be minimized. According to the Ambegaokar–Baratoff formula, critical current is related to normal-state resistance, which can be measured at room temperature. In this study, we focused on the dominant source of non-uniformity for the Josephson junction critical current–junction area variation. We optimized Josephson junction fabrication process and demonstrated resistance variation of 9.8–4.4% and 4.8–2.3% across 22 × 22 mm2 and 5 × 10 mm2 chip areas, respectively. For a wide range of junction areas from 0.008 to 0.12 μm2, we ensure a small linewidth standard deviation of 4 nm measured over 4500 junctions with linear dimensions from 80 to 680 nm. We found that the dominate source of junction area variation limiting Ic{\mathrm{I}}_{\mathrm{c}}Ic​ I c reproducibility is the imperfection of the evaporation system. The developed fabrication process was tested on superconducting highly coherent transmon qubits (T1 > 100 μs) and a nonlinear asymmetric inductive element parametric amplifier.
We study the current-phase relations of superconductor-constriction-superconductor Josephson junctions made from platinum silicide thin films by fabricating dc-superconducting quantum interference devices incorporating pairs of junctions and measuring their magnetic-field-dependent electrical transport. By comparing the supercurrent interference patterns with numerical Ginzburg-Landau simulations, we extract the current-phase relations of individual junctions and quantify the degree of nonlinearity. These measurements show that while the constrictions themselves sustain substantial nonlinearity, the effect is moderated by the kinetic inductance of the device leads, which is an important consideration for practical superconducting circuit applications.