In modern quantum technology, different quantum systems have properties that make them effective for some tasks and less beneficial for others. Integrating these systems together into a single quantum hybrid system, exploiting the advantages of each systems strengths while suppressing their disadvantages, can advance the total performance. On-chip quantum hybrid systems coupled to an ensemble of ultracold atoms show a great potential for advancing quantum technology, because they combine the long coherence time of the atomic ensemble with access to conventional read-out techniques provided by the chip. This thesis presents an apparatus that we have built to carry out experiments with coupling ultracold 87Rb gases to various systems, including nanomechanics and optical cavities. The apparatus operates at ultra-high vacuum conditions, required for experiments with ultracold gases, and its design allows us to easily and quickly switch between different on-chip devices to perform and study quantum hybridization with ultracold gases. Such versatility is provided by separating the region where the ultracold gas is created from the location of the chip, and implementing a system which can optically transfer the atoms between these two regions. In this work we also describe atom cooling techniques used in this experiment, including magneto-optical trapping, sub-Doppler cooling in optical molasses and evaporative cooling. These methods have demonstrated cooling to temperatures below 100 uK. We also discuss a setup for optimal optical-dipole transport. Finally, we theoretically consider magnetic coupling between atoms and nanomechanical oscillators and propose using the Landau-Zener transitions as a method for reducing or measuring mechanical temperature of the resonators, and to create quantum entanglement between multiple devices.
In modern quantum technology, different quantum systems have properties that make them effective for some tasks and less beneficial for others. Integrating these systems together into a single quantum hybrid system, exploiting the advantages of each systems strengths while suppressing their disadvantages, can advance the total performance. On-chip quantum hybrid systems coupled to an ensemble of ultracold atoms show a great potential for advancing quantum technology, because they combine the long coherence time of the atomic ensemble with access to conventional read-out techniques provided by the chip. This thesis presents an apparatus that we have built to carry out experiments with coupling ultracold 87Rb gases to various systems, including nanomechanics and optical cavities. The apparatus operates at ultra-high vacuum conditions, required for experiments with ultracold gases, and its design allows us to easily and quickly switch between different on-chip devices to perform and study quantum hybridization with ultracold gases. Such versatility is provided by separating the region where the ultracold gas is created from the location of the chip, and implementing a system which can optically transfer the atoms between these two regions. In this work we also describe atom cooling techniques used in this experiment, including magneto-optical trapping, sub-Doppler cooling in optical molasses and evaporative cooling. These methods have demonstrated cooling to temperatures below 100 uK. We also discuss a setup for optimal optical-dipole transport. Finally, we theoretically consider magnetic coupling between atoms and nanomechanical oscillators and propose using the Landau-Zener transitions as a method for reducing or measuring mechanical temperature of the resonators, and to create quantum entanglement between multiple devices.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
Hybrid quantum systems provide a promising route toward combining the complementary strengths of distinct physical platforms for quantum information processing. In this context, highly excited Rydberg atoms are particularly attractive due to their strong electric dipole moments, long lifetimes, and compatibility with both optical and microwave frequency regimes. Mechanical resonators, on the other hand, offer long coherence times and the ability to store quantum information in macroscopic degrees of freedom. In this thesis, the development of a novel hybrid platform interfacing ultracold Rydberg atoms with high-overtone bulk acoustic wave resonators (HBARs) in a cryogenic environment is presented. The core components of the experimental apparatus have been designed, assembled, and characterized, including a room-temperature realization featuring the complete cold-atom preparation chain. A first-generation superconducting atom chip for trapping ultracold atoms in a cryogenic environment has been designed and fabricated, establishing the foundation for future experiments under cryogenic conditions. The full experimental realization of the hybrid system, including the integration of the mechanical resonator, was delayed by the delivery of a custom-built cryostat. Nevertheless, the preparation of the cryogenic experiment has been completed, enabling rapid progress toward first experiments once cryogenic operation becomes available. At an operating temperature of 4 K, thermal phonon occupation of HBAR modes is significantly reduced compared to room temperature but remains above the quantum ground state, motivating the development of active cooling strategies. Complementing the experimental work, the feasibility of cooling a mechanical mode toward its quantum mechanical ground state using a cloud of Rydberg atoms is investigated theoretically. In this approach, Rydberg atoms act as a dissipative resource that extracts phononic excitations from the mechanical resonator and removes them via radiative decay. Furthermore, the potential of Rydberg atom-mediated interactions to generate entanglement between spatially separated mechanical oscillators is analyzed. Together, these results establish a foundation for future experimental investigations of Rydberg atom–mechanical oscillator hybrid systems.
Magnetically coupled hybrid quantum systems enable robust quantum state control through Landau-Zener transitions. Here, we show that an ultracold atomic sample magnetically coupled to a nanomechanical resonator can be used to cool the resonator's mechanical motion, to measure the mechanical temperature, and to enable entanglement of more than one of these mesoscopic objects. We calculate the expected coupling for both permanent-magnet and current-conducting nanostring resonators and describe how this hybridization is attainable using recently developed fabrication techniques, including SiN nanostrings and atom chips.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.
This thesis describes the construction of a dual species setup using fermionic 40K and bosonic 87Rb with the goal of cooling to ultracold temperatures and quantum degeneracy, and also perfoming precision collision experiments using a novel optical collider. The setup is composed of a dual species magneto-optical trap, with transfer to an ultrahigh vacuum science cell achieved using a mechanical transport scheme. Atoms are cooled to ultracold temperatures using forced radio frequency evaporation in a Ioffe-Pritchard style magnetic trap. The optical collider utilises the optical dipole force to trap a sample of ultracold atoms and accelerate them towards a target sample using an acousto-optic modulator. The process of cooling 87Rb atoms in the |F = 2, mF = 2> hyperfine state to Bose-Einstein condensation is described, as well as progress towards production of ultracold 40K. Design, implementation, and characterisation of the optical collider is provided, showing that it is a precision metrology device.