Neural network decoding algorithms are recently introduced by Nachmani et al. to decode high-density parity-check (HDPC) codes. In contrast with iterative decoding algorithms such as sum-product or min-sum algorithms in which the weight of each edge is set to 1, in the neural network decoding algorithms, the weight of every edge depends on its impact in the transmitted codeword. In this paper, we provide a novel feed-forward neural network lattice decoding algorithm suitable to decode lattices constructed based on Construction A, whose underlying codes have HDPC matrices. We first establish the concept of feed-forward neural network for HDPC codes and improve their decoding algorithms compared to Nachmani et al. We then apply our proposed decoder for a Construction A lattice with HDPC underlying code, for which the well-known iterative decoding algorithms show poor performances. The main advantage of our proposed algorithm is that instead of assigning and training weights for all edges, which turns out to be time-consuming especially for high-density parity-check matrices, we concentrate on edges which are present in most of 4-cycles and removing them gives a girth -6 Tanner graph. This approach, by slight modifications using updated LLRs instead of initial ones, simultaneously accelerates the training process and improves the error performance of our proposed decoding algorithm.
Neural network decoding algorithms are recently introduced by Nachmani et al. to decode high-density parity-check (HDPC) codes. In contrast with iterative decoding algorithms such as sum-product or min-sum algorithms in which the weight of each edge is set to 1, in the neural network decoding algorithms, the weight of every edge depends on its impact in the transmitted codeword. In this paper, we provide a novel feed-forward neural network lattice decoding algorithm suitable to decode lattices constructed based on Construction A, whose underlying codes have HDPC matrices. We first establish the concept of feed-forward neural network for HDPC codes and improve their decoding algorithms compared to Nachmani et al. We then apply our proposed decoder for a Construction A lattice with HDPC underlying code, for which the well-known iterative decoding algorithms show poor performances. The main advantage of our proposed algorithm is that instead of assigning and training weights for all edges, which turns out to be time-consuming especially for high-density parity-check matrices, we concentrate on edges which are present in most of 4-cycles and removing them gives a girth -6 Tanner graph. This approach, by slight modifications using updated LLRs instead of initial ones, simultaneously accelerates the training process and improves the error performance of our proposed decoding algorithm.
Neural network decoding algorithms are recently introduced by Nachmani et al. to decode high-density parity-check (HDPC) codes. In contrast with iterative decoding algorithms such as sum-product or min-sum algorithms in which the weight of each edge is set to 1, in the neural network decoding algorithms, the weight of every edge depends on its impact in the transmitted codeword. In this paper, we provide a novel \emph{feed-forward neural network lattice decoding algorithm} suitable to decode lattices constructed based on Construction A, whose underlying codes have HDPC matrices. We first establish the concept of feed-forward neural network for HDPC codes and improve their decoding algorithms compared to Nachmani et al. We then apply our proposed decoder for a Construction A lattice with HDPC underlying code, for which the well-known iterative decoding algorithms show poor performances. The main advantage of our proposed algorithm is that instead of assigning and training weights for all edges, which turns out to be time-consuming especially for high-density parity-check matrices, we concentrate on edges which are present in most of 4-cycles and removing them gives a girth-6 Tanner graph. This approach, by slight modifications using updated LLRs instead of initial ones, simultaneously accelerates the training process and improves the error performance of our proposed decoding algorithm.
Low-density parity-check (LDPC) codes have been one of the most popular error correction candidates in modern communication and data storage systems for the past three decades due to their capacity-approaching error correction capability under the Belief Propagation (BP) decoding algorithms. In this dissertation, we investigate three topics related to efficient and effective decoding algorithms and the code design of LDPC codes. In the first part of this dissertation, we propose a methodology with the help of artificial intelligence to design Finite Alphabet Iterative Decoders (FAID) for LDPC codes, which are not only of great theoretical but also practical importance. This model-driven neural network (NN) framework unfolds the decoding iterations, introduces quantized neural networks (QNN) to model the FAIDs, and proposes a new cost function, namely, bit error rate (BER), to address the inefficiency in discrete-output channel scenarios. The low precision activations in the QNN and quantization in the cost functions cause a critical issue that their gradients vanish almost everywhere, making it difficult to use classical backward propagation. We design and leverage straight-through estimators as surrogate gradients to tackle this issue and provide a joint training scheme. These QNN-aided FAIDs, are capable of surpassing the floating-point BP algorithms, with much lower complexity and faster convergence. The QNN-aided approach is general, as it can be applied to both continuous and discrete-output channels. In the second part of this dissertation, we propose a new code construction of LDPC codes based on the conventional parity-check matrices of Reed-Solomon (RS) codes. We investigate the girth and cycle structure and introduce an efficient searching algorithm to reduce short cycles in their Tanner graphs and to construct LDPC codes with a girth of at least eight. We use masking to further reduce the number of short cycles and to adjust the column and row weights of the parity-check matrices of the constructed codes for performance improvement. Our designs are systematic and flexible, which balance the requirements of good waterfall performance and low error-floor while maintaining a structure that facilitates implementation. In the third part of this dissertation, we investigate binary quasi-cyclic (QC) LDPC codes and their capability to correct phased bursts of erasures. We prove that the peeling algorithm when applied to such parity-check matrices of column weight two can correct all erasures that can be corrected by a maximum likelihood (ML) decoder. We show that by modifying the parity-check matrices of column weight two and globally coupling them, the erasure correcting capability can be further enhanced. For the Additive White Gaussian Noise (AWGN) channel, we design QC LDPC codes with parity-check matrices of column weight three or more that can correct phased bursts of erasures and perform well over the AWGN channel. Our analysis of QC-LDPC codes with parity-check matrices of column weight two is rather comprehensive as we determine, for all such codes, their dimensions, minimum Hamming distances, and their capabilities to correct phased bursts.
Low-density parity-check codes (LDPC) can have an impressive performance under iterative decoding algorithms. In this paper we introduce a method to construct high coding gain lattices with low decoding complexity based on LDPC codes. To construct such lattices we apply Construction D', due to Bos, Conway, and Sloane, to a set of parity checks defining a family of nested LDPC codes. For the decoding algorithm, we generalize the application of max-sum algorithm to the Tanner graph of lattices. Bounds on the decoding complexity are derived and our analysis shows that using LDPC codes results in low decoding complexity for the proposed lattices. The progressive edge growth (PEG) algorithm is then extended to construct a class of nested regular LDPC codes which are in turn used to generate low density parity check lattices. Using this approach, a class of two-level lattices is constructed. The performance of this class improves when the dimension increases and is within 3 dB of the Shannon limit for error probabilities of about 10-6. This is while the decoding complexity is still quite manageable even for dimensions of a few thousands
The min-sum (MS) decoding for low-density parity-check codes, though less complex than the sum–product algorithm, suffers from worse error-correcting performance. For enhancement, neural MS decoders leveraging deep learning have recently been introduced, but how to train them has not been sufficiently discussed. In this paper, we propose a novel dataset construction method and also propose systematic learning strategies by finding a good combination of dataset composition, loss functions, weight sharing, weight assignment , and weight update method. Simulations demonstrate that the proposed method achieves better error-correcting performance than other works, especially in the error floor region, within a limited number of iterations.
The recent development of deep learning methods demonstrates a new insight to optimize the decoding of linear codes. In this paper, we survey the typical neural network decoding methods, including data-driven and model-driven schemes. We investigate the design principle, algorithm mechanism, parameter assignment, and training process of these neural decoders for high-density parity check (HDPC), low-density parity-check (LDPC), and polar codes. Finally, we summarize the advantages of neural network decoding and point out some research directions in the future.
In this paper, we analyze the performance of neural belief propagation (BP) decoding on the additive white Gaussian noise (AWGN) channel, compared to the traditional BP algorithm. Previous investigations have shown that assigning pre-trained weights to BP messages can significantly improve the decoding performance in case of high-density parity-check (HDPC) codes, by reducing the negative impact of short cycles. These weights are trained by a neural network whose structure matches the trellis of the decoder. Specifically, we show that medium-density paritycheck (MDPC) codes decoded with neural BP algorithm can achieve lower bit error rate versus HDPC codes with the same codeword length and the same code rate.