Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Instrumentation for Frequency-Modulation Spectroscopy and Phase-Sensitive Detection of Photon Echoes for Hole Burning Optical Storage.

A.A. Gorokhovsky, Iosif Zeylikovich, R. R. Alfano

Published Feb 21, 1997• 0 citations
OpenAlex

Abstract

Abstract : Instrumentation for frequency modulation spectroscopy studies of hole burning materials for optical storage, and a phase sensitive interferometric correlator for photon echoes detection has been purchased. Applications of phase sensitive correlator to phase stability characterization and heterodyne detection of optical signals were demonstrated using the equipment.

Related papers

Optical Memories and Processing in Time- and Frequency Domain

Baozhu Luo

Spectral hole burning and photon echoes are the techniques for frequency-selective optical memories, which have the potential to increase areal data storage density by a factor 10**7. They also have the capability to perform in-memory data processing. In this thesis, several materials and techniques for optical memories in the frequency- and time domain have been investigated. In the frequency domain, ways to increase the storage density and the working temperature were studied using photon-gated spectral hole burning materials of the metal-tetrabenzoporphyrin derivatives. A selection rule for the electron acceptors in the donor-acceptor electron transfer systems was deduced. By doping the material with two different donors a maximum inhomogeneous line width of more than 30 THz was achieved. A polarization holographic technique was established for the formation and detection of spectral holes. Our results indicate that this technique can provide a better signal-to-noise ratio than that achieved by a conventional holographic technique, in particular for samples of poor optical quality. In the time domain, magnetic field-induced and the intensity-induced dephasing processes were studied in Pr3+ doped in a YAlO3 crystal and a Y2SiO5 crystal, respectively. As a step along the route to make photon echo based optical processing possible, the amplification of photon echo signals by the use of a fiber amplifier (Pr3+-doped ZBLAN) was demonstrated. A gain of 45 was achieved. The erasure of stored data using photon echoes has also been investigated. A technique to diagnose the phase and frequency stability of a light source by the photon echo erasure process was proposed and illustrated. An approach to bit-selective data erasure, that is free from laser phase and frequency fluctuations, is also suggested. A concept for an arbitrary shape pulse generator based on photon echoes and hole-burning was experimentally and theoretically studied. Finally, a comparison between the properties and capabilities of spectral hole burning and photon echoes was made.

Lund reports on atomic physics•Jan 1, 1998•0 citations

Time Domain Spectral Hole-Burning Storage

Michael Jefferson

This work achieved several substantial results. A highly stabilized laser system suitable for many detailed studies of data storage phenomena was constructed and made to work. This laser was essential for the investigations which followed. Using the stabilized laser, a real time correlator was demonstrated, which correctly identified all occurances of a test sequence imbedded in random data. This correlator is the first demonstration of the use of phase modulation to store and retreive data in time domain hole-burning. In the frequency domain, narrow holes were burned and scanned, and information storage at a spectral density exceeding 50,000 bits per spot was demonstrated, with perfect recall and excellent signal to noise. We have also made the first demonstration of a novel technique for storing and retreiving phase modulated data streams with time domain spectral hole-burning. This demonstration has been disclosed for patent purposes.

•May 2, 1994•0 citations

Materials for High Temperature Spectral Hole Burning Optical Storage

R. R. Alfano, A.A. Gorokhovsky

Abstract : The optical properties of four Tm(3+) ion - organic ligand chelate complexes in a poly(methyl methacrylate) matrix were studied. These materials are interesting for potential applications of optical hole-burning frequency and time-domain storage and processing. Optical absorption, steady state and time-resolved photoluminescence, and spectral hole-burning at the transition between 3-H6 (1) and 3-H4 (1) crystal-field levels were studied at temperatures between 1.4 and 300 K. The heterodyne grating-generated scan interferometric technique has been demonstrated for the real time detection of the femtosecond data signal.

•Oct 8, 1999•0 citations

Persistent Spectral Hole Burning Materials for Time-and- Frequency-Domain Optical Memories and Signal Processing

R. L. Cone

Abstract : Optical materials for spectral hole burning and coherent transient applications were designed and evaluated, emphasizing relevance to devices including high performance memory, signal processing, high speed holographic recording and analysis, and optical switches, routers, and buffers. The ultimate limits on material performance set by atomic mechanisms were determined. The developed materials contained Eu3+, Pr3+, Tm3+, Tb3+, or Er3+ active ions in various oxide hosts. The first report was made of an Er3+ material for hole burning applications in 1.5 micron optical communications bands. Eight Er3+ materials for applications at 1.5 microns in optical routers and buffer memories were designed and characterized. A correlator' signal processing capability was demonstrated, and the first report was made of operation of a 1.5 micron packet header decoder for all-optimized optical packet switching in optical communications along optical fibers at 1531 nm. Eu3+:Y2SiO5 was optimized for use in 100 GByte ODRAM optical memory devices, considering Eu3+ concentration and temperature. Eight Tm3+ compounds for signal processing applications, such as true time delays for phased-array radar, at diode laser wavelengths near 795 nm were designed and characterized. Eight Tb3+ compounds for photon gated spectral hole burning were designed and characterized, and gated hole burning was observed in Tb3+:YAIO3.

•Jun 18, 1998•0 citations

Coherent erasure and processing in time-domain optical storage

Ulf Elman, Stefan Kröll

Persistent spectral hole-burning and photon echoes can provide insight into the dynamics of amorphous and crystalline materials on the molecular/atomic level. Part of the current interest in these methods, however, is also caused by the existence of potential applications in optical data storage and processing. At present it may be difficult to specify exactly at what applications these techniques should try to target but, based on current research efforts and results, it appears that persistent spectral hole burning is a possible candidate for high density, possibly long time, volumetric storage, while photon echoes have properties more attractive for short time storage or storage connected to processing applications.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

High-Frequency Heterodyned Detection of Picosecond Accumulated Photon Echoes

S. Saikan, Atsushi Fujiwara, Takashi Kushida +1 more

Highly sensitive detection of accumulated photon echoes was achieved by means of a high-frequency heterodyned method using a mode-locked CW dye laser. Experimental results on the modulation frequency dependence of the echo signal strength and also the excitation wavelength dependence of the echo decay curves in Nd:silicate glass are presented.

Japanese Journal of Applied Physics•Jun 1, 1987•14 citations
Abstract : Instrumentation for frequency modulation spectroscopy studies of hole burning materials for optical storage, and a phase sensitive interferometric correlator for photon echoes detection has been purchased. Applications of phase sensitive correlator to phase stability characterization and heterodyne detection of optical signals were demonstrated using the equipment.
Spectral hole burning and photon echoes are the techniques for frequency-selective optical memories, which have the potential to increase areal data storage density by a factor 10**7. They also have the capability to perform in-memory data processing. In this thesis, several materials and techniques for optical memories in the frequency- and time domain have been investigated. In the frequency domain, ways to increase the storage density and the working temperature were studied using photon-gated spectral hole burning materials of the metal-tetrabenzoporphyrin derivatives. A selection rule for the electron acceptors in the donor-acceptor electron transfer systems was deduced. By doping the material with two different donors a maximum inhomogeneous line width of more than 30 THz was achieved. A polarization holographic technique was established for the formation and detection of spectral holes. Our results indicate that this technique can provide a better signal-to-noise ratio than that achieved by a conventional holographic technique, in particular for samples of poor optical quality. In the time domain, magnetic field-induced and the intensity-induced dephasing processes were studied in Pr3+ doped in a YAlO3 crystal and a Y2SiO5 crystal, respectively. As a step along the route to make photon echo based optical processing possible, the amplification of photon echo signals by the use of a fiber amplifier (Pr3+-doped ZBLAN) was demonstrated. A gain of 45 was achieved. The erasure of stored data using photon echoes has also been investigated. A technique to diagnose the phase and frequency stability of a light source by the photon echo erasure process was proposed and illustrated. An approach to bit-selective data erasure, that is free from laser phase and frequency fluctuations, is also suggested. A concept for an arbitrary shape pulse generator based on photon echoes and hole-burning was experimentally and theoretically studied. Finally, a comparison between the properties and capabilities of spectral hole burning and photon echoes was made.
This work achieved several substantial results. A highly stabilized laser system suitable for many detailed studies of data storage phenomena was constructed and made to work. This laser was essential for the investigations which followed. Using the stabilized laser, a real time correlator was demonstrated, which correctly identified all occurances of a test sequence imbedded in random data. This correlator is the first demonstration of the use of phase modulation to store and retreive data in time domain hole-burning. In the frequency domain, narrow holes were burned and scanned, and information storage at a spectral density exceeding 50,000 bits per spot was demonstrated, with perfect recall and excellent signal to noise. We have also made the first demonstration of a novel technique for storing and retreiving phase modulated data streams with time domain spectral hole-burning. This demonstration has been disclosed for patent purposes.
Abstract : The optical properties of four Tm(3+) ion - organic ligand chelate complexes in a poly(methyl methacrylate) matrix were studied. These materials are interesting for potential applications of optical hole-burning frequency and time-domain storage and processing. Optical absorption, steady state and time-resolved photoluminescence, and spectral hole-burning at the transition between 3-H6 (1) and 3-H4 (1) crystal-field levels were studied at temperatures between 1.4 and 300 K. The heterodyne grating-generated scan interferometric technique has been demonstrated for the real time detection of the femtosecond data signal.
Abstract : Optical materials for spectral hole burning and coherent transient applications were designed and evaluated, emphasizing relevance to devices including high performance memory, signal processing, high speed holographic recording and analysis, and optical switches, routers, and buffers. The ultimate limits on material performance set by atomic mechanisms were determined. The developed materials contained Eu3+, Pr3+, Tm3+, Tb3+, or Er3+ active ions in various oxide hosts. The first report was made of an Er3+ material for hole burning applications in 1.5 micron optical communications bands. Eight Er3+ materials for applications at 1.5 microns in optical routers and buffer memories were designed and characterized. A correlator' signal processing capability was demonstrated, and the first report was made of operation of a 1.5 micron packet header decoder for all-optimized optical packet switching in optical communications along optical fibers at 1531 nm. Eu3+:Y2SiO5 was optimized for use in 100 GByte ODRAM optical memory devices, considering Eu3+ concentration and temperature. Eight Tm3+ compounds for signal processing applications, such as true time delays for phased-array radar, at diode laser wavelengths near 795 nm were designed and characterized. Eight Tb3+ compounds for photon gated spectral hole burning were designed and characterized, and gated hole burning was observed in Tb3+:YAIO3.
Persistent spectral hole-burning and photon echoes can provide insight into the dynamics of amorphous and crystalline materials on the molecular/atomic level. Part of the current interest in these methods, however, is also caused by the existence of potential applications in optical data storage and processing. At present it may be difficult to specify exactly at what applications these techniques should try to target but, based on current research efforts and results, it appears that persistent spectral hole burning is a possible candidate for high density, possibly long time, volumetric storage, while photon echoes have properties more attractive for short time storage or storage connected to processing applications.