Synthesis and optimization of quantum circuits have received significant attention from researchers in recent years. Developments in the physical realization of qubits in quantum computing have led to new physical constraints to be addressed. One of the most important constraints that is considered by many researchers is the nearest neighbor constraint which limits the interaction distance between qubits for quantum gate operations. Various works have been reported in the literature that deal with nearest neighbor compliance in multi-dimensional (mostly 1D and 2D) qubit arrangements. This is normally achieved by inserting SWAP gates in the gate netlist to bring the interacting qubits closer together. The main objective function to minimize here is the number of SWAP gates. The present paper proposes an efficient qubit placement strategy in a three-dimensional (3D) grid that considers not only qubit interactions but also the relative positions of the gates in the circuit. Experimental evaluation on a number of benchmark circuits show that the proposed method reduces the number of SWAP gates by 16.2% to 47.0% on the average as compared to recently published works.
Synthesis and optimization of quantum circuits have received significant attention from researchers in recent years. Developments in the physical realization of qubits in quantum computing have led to new physical constraints to be addressed. One of the most important constraints that is considered by many researchers is the nearest neighbor constraint which limits the interaction distance between qubits for quantum gate operations. Various works have been reported in the literature that deal with nearest neighbor compliance in multi-dimensional (mostly 1D and 2D) qubit arrangements. This is normally achieved by inserting SWAP gates in the gate netlist to bring the interacting qubits closer together. The main objective function to minimize here is the number of SWAP gates. The present paper proposes an efficient qubit placement strategy in a three-dimensional (3D) grid that considers not only qubit interactions but also the relative positions of the gates in the circuit. Experimental evaluation on a number of benchmark circuits show that the proposed method reduces the number of SWAP gates by 16.2% to 47.0% on the average as compared to recently published works.
Design and synthesis of quantum circuits have gained huge momentum during the last few years. With various physical constraint sone of the major issues is in making quantum circuits nearest neighbor complaint. The existing one and two dimensional architectures for the placement of qubits does not scale well for larger circuits. The situation thus demands for a faster approach to solve the problem. To make a quantum circuit nearest neighbor compliant, SWAP gates are inserted in the quantum gate circuit to bring the interacting qubits of a gate adjacent. We have proposed a faster method with a simple yet effective algorithm to minimize the number of SWAP gates for adjacent interactions. The time required for processing does not exceed one second even for larger benchmark circuits. The proposed method is found to reduce the number of SWAP gates on an average by 9.5% compared to the best results in previous works on 2D architectures, and by 45.7% compared to the best results on 1D architecture.
Motivated by its promising applications e.g. for database search or factorization, significant progress has been made in the development of automated design methods for quantum circuits. But in order to keep up with recent physical developments in this domain, new technological constraints have to be considered. Limited interaction distance between gate qubits is one of the most common of these constraints. This led to the development of several strategies aiming at making a given quantum circuit nearest neighbor-compliant by inserting SWAP gates into the existing structure. Usually these strategies are of heuristic nature. In this work, we present an exact approach that enables nearest neighbor-compliance by inserting a minimal number of SWAP gates. Experiments demonstrate the applicability of the approach which enabled a comparison of results obtained by heuristic methods to the actual optimum.
In the last few years, tremendous improvement in the field of quantum computing has been witnessed. Although quantum technologies such as ion-trap, NMR, quantum dots have emerged as the promising platforms for implementing quantum circuits but these technologies have faced several design issues. One such important design problem is the nearest neighbor condition, which requires the qubits to interact with adjacent neighbors. This problem can be addressed by adding SWAP gates in the circuit. By doing so, the overhead in the circuit increases thus NN designs with minimum number of SWAP gates need to be developed. Focusing on this, here, in this work, we introduce a heuristic design method for efficient NN realization of quantum circuits in 2D architecture. Our NN transformation process is carried out in two phases, where initially in the first phase, the input circuit is mapped to 2D configuration using a qubit placement strategy and then in the second phase NN designs are obtained through SWAP gate insertion. At the end, the design algorithm has been evaluated over a large set of benchmark functions and the results are compared with some of the existing works. From this comparison, it is seen that our proposed method performs better than the reported works.
Abstract In some quantum technologies, an interaction is only allowed between physically adjacent qubits, hence the nearest-neighbor requirement is needed. In such technologies, quantum gates are limited to operate on adjacent qubits. To make a quantum circuit compliant with the nearest-neighbor requirement, SWAP gates are inserted into the circuit to move the interacting qubits of a gate to be adjacent to each other. The mapping of qubits on the physical environment has an important role on reducing the number of SWAP gates and thus the circuit latency. Focusing on this issue, in this paper, a method is proposed that maps a quantum circuit onto a 3D physical hardware such as a 3D optical lattice. A new methodology for this mapping problem is proposed based on a complex network spectral clustering algorithm and graph theory, which are suitable for very large scale networks. It includes three steps: finding the order of qubit mapping, placing physical qubits, and routing. Simulation results show that the proposed mapping approach not only decreases the average number of SWAP gates by about 37% but also improves the average runtime by about 87% for the 2D architecture compared to PAQCS. Moreover, it reduces the average number of SWAP gates for the 3D architecture by 17.1% compared to the best studies in the literatures.
In the present era of computation, quantum computing may offer a new direction as it allows to solve certain problems significantly faster than classical solutions. But it also has been found that there are several constrains in performing a successful realization of quantum circuits. One such constraint is the nearest neighbor (NN) criterion which states that qubits which interact with each other have to be adjacent. Motivated by this objective, in this work we propose a linear qubit placement technique that effectively rearranges the qubits and transforms quantum circuits to improved NN-based designs by inserting SWAPs. Furthermore, for placing these SWAPs in appropriate positions, we implemented a look-ahead strategy that considers the effect of the rest of the gates and computes a corresponding impact value which guides the insertion of the SWAP gates. To this extent, we consider three different strategies to evaluate the corresponding "look-ahead effects" and their influence on existing gates. At the end of this work, we have evaluated the developed methodology over a wide range of benchmarks and compared the results with existing related works. In this comparison, we have seen that the proposed technique outperforms the related works and provides substantial reductions in SWAP overhead.
Since decades, quantum computing has received tremendous attention among the researchers due to its dominance over classical computing. But simultaneously it has faced some design challenges and implementation constraints in this long run. One such constraint to build quantum circuits is to satisfy the so-called Nearest Neighbor (NN) property in the implemented circuits. Using SWAP gates, this constraint can be satisfied. But this leads to another design issue, namely how to determine such NN designs with a minimum use of SWAP gates. In way to further explore this area, in this work, we propose a heuristic approach for efficient NN complaint representation of quantum circuits in 2D space. The developed technique is segmented in three stages - qubit selection, qubit placement and SWAP gate insertion. The stated approach has been tested over a wide spectrum of benchmarks and reductions in cost parameters are observed. Improvement of more than 17%, 3% over 2D designs and 35%, 22% over 1D designs on SWAP count and quantum cost can be reported, respectively.