Raman amplification in a fiber transmission line is described in terms of quantum mechanics. The evolution of the light field operator is derived on the basis of the Heisenberg equation, including Raman interaction and a beam-splitter model that simulates the fiber propagation loss. The light field operator thus derived is then used to evaluate physical quantities, such as mean amplitude, mean photon number, and their variances. The results obtained are equivalent to conventional classical expressions, providing a logical quantum mechanical base for the conventional phenomenological treatment. In addition, the effect of the propagation loss on quantum noise is clarified, which is not taken into account in the classical treatment.
Raman amplification in a fiber transmission line is described in terms of quantum mechanics. The evolution of the light field operator is derived on the basis of the Heisenberg equation, including Raman interaction and a beam-splitter model that simulates the fiber propagation loss. The light field operator thus derived is then used to evaluate physical quantities, such as mean amplitude, mean photon number, and their variances. The results obtained are equivalent to conventional classical expressions, providing a logical quantum mechanical base for the conventional phenomenological treatment. In addition, the effect of the propagation loss on quantum noise is clarified, which is not taken into account in the classical treatment.
Phase-sensitive amplification (PSA) can provide low-noise signal amplification, and a quantum-limited noise figure of 0 dB, that is, additional noise-free amplification, is theoretically achievable. However, in fiber-based single-pumped PSA systems, it has been reported that Raman scattering in the fiber degrades the noise figure from the ideal 0 dB. In the present study, the influence of Raman scattering on quantum noise in dual-pumped degenerate PSA in a fiber is investigated. A quantum mechanical treatment starting from the Heisenberg equation of motion is developed, considering the parametric interaction and Raman interaction simultaneously, and an analytical expression for the noise figure is derived. An example of calculation is also presented, which quantitatively indicates the degradation in the noise figure due to Raman scattering.
We analyze the quantum dynamics of radiation propagating in a single-mode optical fiber with dispersion, nonlinearity, and Raman coupling to thermal phonons. We start from a fundamental Hamiltonian that includes the principal known nonlinear effects and quantum-noise sources, including linear gain and loss. Both Markovian and frequency-dependent, non-Markovian reservoirs are treated. This treatment allows quantum Langevin equations, which have a classical form except for additional quantum-noise terms, to be calculated. In practical calculations, it is more useful to transform to Wigner or +P quasi-probability operator representations. These transformations result in stochastic equations that can be analyzed by use of perturbation theory or exact numerical techniques. The results have applications to fiber-optics communications, networking, and sensor technology.
Wavelength dependence of quantum noise in nondegenerate phase-sensitive amplification in an optical fiber, where signal and its phase-conjugated idler lights are incident into a fiber together with pump light, is theoretically investigated. An analytical formula of the quantum-limited noise figure, that takes Raman scattering into account as well as parametric amplification, is derived based on full quantum mechanical treatment. Using the obtained formula, a calculation example of the noise figure spectrum is also presented, where the pump light phase is adjusted so that the signal gain is maximum at a phase-matched wavelength, supposing multichannel amplification.
Introduction In previous chapters we studied wave propagation in fiber OPAs from a classical standpoint, i.e. starting from Maxwell's equations. That approach provides only a partial view of the rich nature of the electromagnetic field, namely its wave nature. However, a complete description of the electromagnetic field requires quantum mechanics. This quantum description of the electromagnetic field (called quantum electrodynamics, or QED) predicts fluctuations in measurable quantities due to the Heisenberg uncertainty principle and sets ultimate limits on the performance of devices such as optical amplifiers. A remarkable result of this theory is that the statistics and thus the noise performance of a system are affected by the quantum statistics of the source and by the physical measurement that is made. Thus a different analysis is needed depending on whether homodyne, heterodyne, or direct detection (where the field simply impinges on a photodiode) is used. Direct detection reveals the particle nature of the electromagnetic field. More specifically, energy arrives in discrete units, called photons, each of which may create an electron–hole pair in a semiconductor photodetector. In particular, the number of photons in an optical pulse can be thought of as a random variable having a mean and a variance. By deriving the mean and variance of the photocurrent that would be present if one performed direct detection of ideal laser light at the input of an optical amplifier and then a similar measurement at its exit, one can quantify the degradation of the signal-to-noise ratio (SNR) caused by the amplifier.
We analyze the quantum dynamics of radiation propagating in a single-mode optical fibre with dispersion, nonlinearity, and Raman coupling to thermal phonons. We start from a fundamental Hamiltonian that includes the principal known nonlinear effects and quantum-noise sources, including linear gain and loss. Both Markovian and frequency-dependent, non-Markovian reservoirs are treated. This treatment allows quantum Langevin equations, which have a classical form except for additional quantum-noise terms, to be calculated. In practical calculations, it is more useful to transform to Wigner or +P quasi-probability operator representations. These transformations result in stochastic equations that can be analyzed by use of perturbation theory or exact numerical techniques. The results have applications to fibre-optics communications, networking, and sensor technology.
As is well known, quantum optics has developed significantly in recent years and advanced several hot research topics, such as quantum communications, quantum sensing, quantum calculations, etc. Among these researches, it is important to understand the quantum information transmitting in optical fiber. For realizing longer transmission distance and better transmission quality, great effort has devoted to the researches of encoding and decoding at the transmitter and the receiver end. However, less attention was paid to the fading of signal in the transmission channel. In this work, we mainly focus on the transmission model of optical quantum transmission and the influences of loss, dispersion and nonlinear effect on fiber transmission of optical quantum information are also discussed.Quantum information transmission can be influenced by loss, dispersion and nonlinear effect in optical fiber, leading to transmission state evolution and energy transfer. Based on the transmission equation of single mode fiber and quantum theory of electromagnetic field, the fundamental mode field of single mode fiber is quantized. A quantum transmission equation is deduced from the classical optical transmission equation through quantizing the amplitude of electromagnetic field. Compared with classic wave theory, the photon transmission equation quantizing the slowly-varying amplitude in the coupled nonlinear Schrdinger equation is obtained. In the classic wave equation, light is interpreted as energy which propagates as waves. The photon transmission equation is obtained by quantizing the slowly-varying amplitude of light, that is, the particle nature of light. The energy propagates through alternative interaction between creation and annihilation operator on photons. The transmission equations show that photons will interact with the transmission medium during propagation and be influenced by dispersion, nonlinear effect, loss, etc. By giving a trail solution and introducing a perturbation term, the transmission equation is solved for the complicated case where the dispersion, loss and nonlinear effect are all involved. A dispersion equation that should be satisfied for nontrivial solution is then obtained. From this dispersion equation, the relation between photon power and perturbation frequency is calculated and analyzed. The change of photon power in generalized field with perturbation frequency is discussed, and the influences of fiber dispersion and nonlinearity on the solution are analyzed.Some conclusions are obtained by perturbed solution and analyses of single photon transmission equation in optical fiber. It is found that photon power decreases with the increase of perturbation frequency and reaches its maximum value for zero perturbation frequency. At the same time, the optical power is affected by the dispersion of the optical fiber. Photon power decreases with the GVD coefficient far from the zero dispersion point. It is also found that photon power decreases with the increase of nonlinear coefficient. This work may contribute to the research of the properties of quantum fiber transmission system.