Near infrared photons are a promising choice for quantum information processing; their low transmission loss is necessary for applications such as long distance Quantum Key Distribution (QKD) in optical fibre and integrated quantum optics. An ideal proof-of-concept test of such applications would be to create, manipulate and detect single photons on a monolithic chip. Superconducting nanowire single photon detectors promise high system detection efficiencies, low dark count and low jitter under near-infrared photon illumination. Superconducting nanowire devices using NbTiN films show improved coupling efficiencies with the aid of oxidized silicon cavities. NbTiN devices were characterised in a fibre-coupled package, achieving high SDE (43%) coherent key generation rates over 200km in a T12 QKD protocol simulation. Hairpin superconducting nanowires offer excellent integration with silicon waveguide optics and can achieve near unity absorption efficiencies. Hairpin devices fabricated from MoSi films were characterised using a custom pulse tube He-3 cryostat engineered for low vibration operation at 350mK and capable of near-infrared optical maps of superconducting nanowires. The devices exhibited high critical currents 40uA), low jitter (51ps) and a dark count rate <10cps. Tests of perpendicular coupling efficiencies yield low system detection efficiencies due to high coupling losses. Using an alternative coupling method via grating couplers or cleave mounting, it is expected a much higher system detection efficiency can be achieved.
Near infrared photons are a promising choice for quantum information processing; their low transmission loss is necessary for applications such as long distance Quantum Key Distribution (QKD) in optical fibre and integrated quantum optics. An ideal proof-of-concept test of such applications would be to create, manipulate and detect single photons on a monolithic chip. Superconducting nanowire single photon detectors promise high system detection efficiencies, low dark count and low jitter under near-infrared photon illumination. Superconducting nanowire devices using NbTiN films show improved coupling efficiencies with the aid of oxidized silicon cavities. NbTiN devices were characterised in a fibre-coupled package, achieving high SDE (43%) coherent key generation rates over 200km in a T12 QKD protocol simulation. Hairpin superconducting nanowires offer excellent integration with silicon waveguide optics and can achieve near unity absorption efficiencies. Hairpin devices fabricated from MoSi films were characterised using a custom pulse tube He-3 cryostat engineered for low vibration operation at 350mK and capable of near-infrared optical maps of superconducting nanowires. The devices exhibited high critical currents 40uA), low jitter (51ps) and a dark count rate <10cps. Tests of perpendicular coupling efficiencies yield low system detection efficiencies due to high coupling losses. Using an alternative coupling method via grating couplers or cleave mounting, it is expected a much higher system detection efficiency can be achieved.
Single photon detection advanced rapidly in the last decade. The superconducting nanowire single-photon detector (SNSPD) is an emerging technology, which offers low dark count rates, broadband sensitivity from visible to mid-infrared wavelengths and very high quantum efficiency. All these features are appealing for future emerging applications in remote gas sensing, quantum key distribution and quantum information processing. By enclosing the detector in an optical cavity, tuned to the operating wavelength, the total system detection of the SNSPD is improved. Based on the cavity design, the detector absorption is boosted at the desired experimental wavelength. Devices have been fabricated and tested, in this thesis, with enhanced detection efficiency at near-infrared, infrared and mid-infrared wavelengths. NbTiN detectors fabricated on Ta2O5 / SiO2 distributed Bragg reflectors (DBR) for front-side coupling exhibit a system detection efficiency of ≈ 90% at λ = 940 nm for the best device measured. SNSPDs were also fabricated in NbTiN on metallic mirrors for back-side coupling for 1550 and 2333 nm experimental wavelengths. The first design exhibited a system detection efficiency of ≈ 84.5%, at λ = 1550 nm for the best device measured. The second exhibited low system detection efficiency since the device suffered from unexpectedly high dark count rate mainly due to blackbody radiation at 2.2 K. However, it was possible to measure the timing jitter of this device at 350 mK indicating a FWHM of 84 ps. Another technique to improve the total system detection efficiency of the SNSPD, is by fabricating a hairpin-shaped nanowire atop a single mode waveguide. In this design, photons travel through the waveguide and via evanescent coupling are absorbed in the nanowire. These SNSPD devices have been designed to thread along single mode Si ridge waveguides using a hairpin-shaped nanowire structure, which offers enhanced coupling and absorption efficiency via evanescent coupling. These ultra-thin superconducting MoSi detectors are precisely patterned on top of a single mode Si waveguide (600 nm) with alignment error less than 40 nm. Low temperature electrical and nano-optical characterization was carried out using a two-stage pulse tube (PT) coldhead, using an additional 4He / 3He sorption pump, low vibration characterization of SNSPD devices at 350 mK was carried out. Characterised devices exhibit low dark count rate <5 counts per second and timing jitter of ≈ 83 ps full width half maximum (FWHM) at wavelength (λ) = 1550 nm and at critical current ≈ 30 µA.
Single photon detectors are a vital part of many emerging technologies which harness the quantum properties of light to benefit the fields of communication, computation and sensing. Superconducting nanowire single photon detectors (SNSPDs) offer high detection efficiency, low dark count rates, low timing jitter, and infrared sensitivity that are required by the most demanding single photon counting applications. This thesis presents SNSPDs fabricated and tested at the University of Glasgow that are integrated with optical structures which enable enhanced detection efficiency and integration with waveguide circuit technology. The monolithic integration of waveguide circuit components presents a route towards realisation of an optical quantum information processor that has the stability and scalability to perform the demanding tasks of quantum computation. A novel process is introduced for incorporating superconducting detectors with single mode gallium arsenide waveguides and quantum dot single photon sources. Together these elements would enable the generation of quantum states of light which could be manipulated and detected on a single chip. Detectors are patterned in NbTiN thin superconducting films on to suspended nanobeam waveguides with better than 50 nm alignment accuracy. Low temperature electrical and optical testing confirms the detectors’ single photon sensitivity under direct illumination as well as to waveguide coupled light. Measured detectors were found to have internal registering efficiencies of 6.8 ± 2.4%. Enhancing absorption of photons into thin superconducting films is vital to the creation of high efficiency superconducting single photon detectors. Fabricating an SNSPD on a dielectric mirror creates a partial cavity that can be tailored to enhance detection of light at specific wavelengths. Devices have been fabricated and tested in this thesis with enhanced detection efficiency at infrared and visible wavelengths for quantum cryptography, remote sensing and life science applications. Detectors fabricated in NbTiN on GaAs/AlGaAs Bragg mirrors exhibited a system detection efficiency of 1.5% at 1500 nm wavelength for the best device measured. SNSPDs were also fabricated in NbN on aperiodic dielectric mirrors with a range of different bandwidths. A peak system detection efficiency of 82.7% at 808 nm wavelength was recorded.
Single photon technology is enabling for quantum communication and processing. Combining single photon sources, routing circuitry and highly efficient detectors in a high yield, low-loss and scalable fashion represent today a major challenge. Nanophotonic devices allow for the realization of on-chip small footprint architectures for generating, manipulating and detecting single photons. Waveguide-integrated superconducting nanowire single photon detectors are today state-of-the art devices capable of detecting single photons propagating in an integrated photonic circuit with high efficiency, speed and low timing uncertainty. Their excellent metrics in the near-infrared allows to directly interface on-chip devices with existing C-Band communication technology systems. To move towards high communication speed, efficient detectors able to sustain Gcps count rate are desirable. Here we present the design process and the experimental characterization of a new generation of fast detectors, consisting of µm-long NbN superconducting nanowires embedded in a SOI two-dimensional photonic crystal cavity. Almost 70% efficiency at telecommunication wavelengths has been achieved with negligible dark counts and sub-ns recovery time, which could enable Gcps count rates.
We present enhancements in the spectral sensitivity and scalability of superconducting nanowire single-photon detectors based on U-shaped NbTiN nanowires. Designed on a silicon-on-insulator photonic platform, our detectors exhibit near-unity internal detection efficiency under flood illumination across wavelengths from 1550nm to 3502nm. Additionally, we demonstrate arrays of waveguide-integrated superconducting nanowire single-photon detectors optimized for operation at 1550nm. Cryogenic light coupling to the arrays is achieved through a photonic wire bonding technique, enabling low-loss coupling and high-density integration, thereby facilitating the scaling of detector counts per cryostat for near-infrared applications.
The forthcoming era of quantum computers can be a threat to the conventional cryptography and data security. Quantum Key Distribution (QKD) provides unconditional security under real-life conditions with several protocols over long distances in fibre and free space communication. Superconducting Nanowire Single Photon Detectors (SNSPDs) are becoming a dominant technology for QKD thanks to their unique characteristics, such as a near-unity efficiency in the infrared, low dark counts and picoseconds time resolution. Where the detector is typically a weakness of QKD, these SNSPDs characteristics make exploitation difficult. In this work, we characterized NbN SNSPDs at 2.2 K, using a CW laser source at 1550 nm, varying both bias currents and input photon rates to prove their high efficiency at low dark counts with a high counting rate, consistent with the requirements for QKD over long distances or with a high secure key rate.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.