Exploring the quantum world often starts by drawing a sharp boundary between a microscopic subsystem and the bath to which it is invariably coupled. In most cases, knowledge of the physical processes occuring in the bath is not required in great detail. However, recent developments in circuit quantum electrodynamics are presenting regimes where the actual dynamics of engineered baths, such as microwave photon resonators, becomes relevant. Here we take a major technological step forward, by tailoring a centimeter-scale on-chip bath from a very long metamaterial made of 4700 tunable Josephson junctions. By monitoring how each measurable bosonic resonance of the circuit acquires a phase-shift due to its interaction with a transmon qubit, one can indirectly measure qubit properties, such as transition frequency, linewidth and non-linearity. This new platform also demonstrates the ultra-strong coupling regime for the first time in the context of Josephson waveguides. Our device combines a large number of modes (up to 10 in the present setup) that are simultaneously hybridised with the two-level system, and a broadening dominated by the artificial environment that is a sizeable fraction of the qubit transition frequency. Finally, we provide a quantitative and parameter-free model of this large quantum system, and show that the finite environment seen by the qubit is equivalent to a truly macroscopic bath.
Abstract The interaction between light and matter remains a central topic in modern physics despite decades of intensive research. Coupling an isolated emitter to a single mode of the electromagnetic field is now routinely achieved in the laboratory, and standard quantum optics provides a complete toolbox for describing such a setup. Current efforts aim to go further and explore the coherent dynamics of systems containing an emitter coupled to several electromagnetic degrees of freedom. Recently, ultrastrong coupling to a transmission line has been achieved where the emitter resonance broadens to a significant fraction of its frequency, and hybridizes with a continuum of electromagnetic (EM) modes. In this work we gain significantly improved control over this regime. We do so by combining the simplicity and robustness of a transmon qubit and a bespoke EM environment with a high density of discrete modes, hosted inside a superconducting metamaterial. This produces a unique device in which the hybridisation between the qubit and many modes (up to ten in the current device) of its environment can be monitored directly. Moreover the frequency and broadening of the qubit resonance can be tuned independently of each other in situ. We experimentally demonstrate that our device combines this tunability with ultrastrong coupling and a qubit nonlinearity comparable to the other relevant energy scales in the system. We also develop a quantitative theoretical description that does not contain any phenomenological parameters and that accurately takes into account vacuum fluctuations of our large scale quantum circuit in the regime of ultrastrong coupling and intermediate non-linearity. The demonstration of this new platform combined with a quantitative modelling brings closer the prospect of experimentally studying many-body effects in quantum optics. A limitation of the current device is the intermediate nonlinearity of the qubit. Pushing it further will induce fully developed many-body effects, such as a giant Lamb shift or nonclassical states of multimode optical fields. Observing such effects would establish interesting links between quantum optics and the physics of quantum impurities
Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as
380, for the coupling rate of the
ket0−ket1 transition. Furthermore, we show that we can enhance or suppress the coupling rate of the
ket1−ket2 transition relative to the
ket0−ket1 transition, by more than a factor of
200. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.
Metamaterial resonant structures made from arrays of superconducting lumped-circuit elements can exhibit microwave-mode spectra with left-handed dispersion for the standing-wave resonances, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this regime for multimode circuit quantum electrodynamics, we perform a series of measurements of such a superconducting metamaterial resonator coupled to a flux-tunable transmon qubit. Through microwave measurements of the metamaterial, we observe the coupling of the qubit to each of the modes that it passes through. Using a separate readout resonator, we probe the qubit dispersively and characterize the qubit energy relaxation as a function of frequency, which is strongly affected by the Purcell effect in the presence of the dense mode spectrum. Additionally, we investigate the ac Stark shift of the qubit as the photon number in the various metamaterial modes is varied. Through numerical simulations, we explore designs based on this scheme with enhanced coupling so that the coupling energy between the qubit and the metamaterial modes can exceed the intermode spacing in future devices with achievable circuit parameters. The ability to tailor the dense mode spectrum through the choice of circuit parameters and manipulate the photonic state of the metamaterial through interactions with qubits makes this a promising platform for analog quantum simulation with microwave photons and quantum memories.
Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qubits while simultaneously reducing coupling of both the qubit and mechanical mode to the environment. Here we report measurements of a qubit-coupled mechanical resonator system consisting of an ultra-high-frequency nanoresonator and a long coherence-time superconducting transmon qubit, embedded in a superconducting coplanar waveguide cavity. It is demonstrated that the nanoresonator and transmon have commensurate energies and transmon coherence times are one order of magnitude larger than for all previously reported qubit-coupled nanoresonators. Moreover, we show that numerical simulations of this new hybrid quantum system are in good agreement with spectroscopic measurements and suggest that the nanoresonator in our device resides at low thermal occupation number, near its ground state, acting as a dissipative bath seen by the qubit. We also outline how this system could soon be developed as a platform for implementing more advanced experiments with direct relevance to quantum information processing and quantum thermodynamics, including the study of nanoresonator quantum noise properties, reservoir engineering, and nanomechanical quantum state generation and detection.
With the introduction of superconducting circuits into the field of quantum optics, many experimental demonstrations of the quantum physics of an artificial atom coupled to a single-mode light field have been realized. Engineering such quantum systems offers the opportunity to explore extreme regimes of light-matter interaction that are inaccessible with natural systems. For instance the coupling strength g can be increased until it is comparable with the atomic or mode frequency omega(a,m) and the atom can be coupled to multiple modes which has always challenged our understanding of light-matter interaction. Here, we experimentally realize a transmon qubit in the ultra-strong coupling regime, reaching coupling ratios of g/omega(m) = 0.19 and we measure multi-mode interactions through a hybridization of the qubit up to the fifth mode of the resonator. This is enabled by a qubit with 88% of its capacitance formed by a vacuum-gap capacitance with the center conductor of a coplanar waveguide resonator. In addition to potential applications in quantum information technologies due to its small size, this architecture offers the potential to further explore the regime of multi-mode ultra-strong coupling.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.