Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Wireless Networks and Mobile Communications (WINCOM)

New hard decision decoder of LDPC codes using single Bit Flipping algorithm

Soufian Addi, Ahlam Berkani, Ahmed Azouaoui, Mostafa Belkasmi

Published Nov 1, 2017• 5 citations
Publisher

Abstract

The Bit-Flipping (BF) algorithm is considered as a hard decoding method for LDPC codes. It is much simpler than the probabilistic methods like Sum Product Algorithm (SPA), and can be efficiently implemented by electronic circuits. In this paper, we propose a new Bit Flipping algorithm for Low-Density Parity-Check codes (LDPC) called Single Bit-Flipping (SBF). Compared to the Gallager Bit-Flipping algorithm, the proposed algorithm employs criteria of flipping single bit chosen carefully. This method eliminates the risk for flipping more than one bit at a time that can induce additional error bits and propagate the errors to the later iterations. We present some results obtained by applying this new method that provides a gain in performance in comparison to the standard Gallager Bit-Flipping with low complexity.

DOI
10.1109/wincom.2017.8238191

Related papers

An efficient bit-flipping decoding algorithm for LDPC codes

Tso-Cho Chen

In this paper, a new method for improving hard-decision bit-flipping (BF) decoding is proposed for low-density parity-check codes. The flipping criterion is derived theoretically from the soft-decision belief-propagation decoding algorithm. The proposed BF decoding algorithm is channel independent and is improved by introducing a more efficient method for computing the reliability of the parity checks. Extensive simulations are provided to demonstrate the efficiency of the proposed algorithm. Simulation results show that the proposed algorithm can achieve about 1.5dB coding gain improvement at BER = 5×10−6while reducing up to 48% iterations for decoding and maintaining low decoding complexity, compared with the conventional weighted BF algorithm.

Cross Strait Quad-Regional Radio Science and Wireless Technology Conference (CSQRWC)•Jul 1, 2012•6 citations

Improved Bit-Flipping Method for Decoding Structured Low-Density Parity-Check Codes

Meiling Zhang

An improved bit-flipping(BF) algorithm with low complexity for decoding structured low-density parity-check codes(LDPC) is proposed to improve the performance of the hard-decision BF algorithm.The hard-decision bits are divided into two groups based on the magnitudes of the received symbols,and at each iteration,the proposed algorithm can flip more than one bit with using two thresholds,and the flipping error probability is effectively decreased.The improved BF algorithm requires some real number comparisons before iterations and requires only logical operations during the iterations.Compared with the weighted bit-flipping algorithm and its modifications,the new method is with significantly lower complexity.Simulations show that the proposed algorithm is provided with very fast convergence speed and excellent performance with significantly low complexity.

Beijing Youdian Xueyuan xuebao•Jan 1, 2012•0 citations

Weighted candidate bit based bit-flipping decoding algorithms for LDPC codes

Zhu Qing, Lenan Wu

In order to improve the bit-flipping (BF) decoding algorithms, a weighted hard-decision based BF decoding algorithm for low-density parity-check (LDPC) codes is presented, in which the weights of variable-nodes are employed. A new metric is defined for the weight of candidate bits not only in unsatisfied parity check equations but also in satisfied ones. The connection between min-sum decoding algorithm and the proposed algorithm is presented. Simulation results show that the new decoding algorithm can provide better FER performance and faster convergence speed than the original candidate bit based bit-flipping (CBBF) algorithm.

International Conference on Consumer Electronics, Communications and Networks (CECNet)•Nov 1, 2013•4 citations

An Improved Iterative Bit-flipping Decoding Algorithm for Low-density Parity-check Codes

Meiling Zhang

An improved iterative bit-flipping(BF) algorithm adapted for decoding low-density parity-check(LDPC) codes is proposed to improve the performance of the hard-decision BF decoding algorithm.The new algorithm uses an alternating threshold pattern to determine the bits whether to be flipped or not,and the flipping error probability is effectively decreased.Simulation results show that compared with BF algorithm,the improved BF algorithm improves both the error-correction performance and the convergence speed while maintaining the low computational complexity.

Telecommunication Engineering•Jan 1, 2012•0 citations

Improved Iterative Bit Flipping Decoding Algorithms for LDPC Convolutional Codes

Xin Sheng Zhou, B.F. Cockburn, Stephen Bates

A new class of iterative bit flipping (BF) decoding algorithms adapted for low-density parity check (LDPC) convolutional codes is proposed. Compared with Gallager's original BF algorithm, the new BF algorithms improve both the coding gain and the error correction speed. At a bit error rate (BER) of 10 , the best of the new bit-flipping algorithms achieves, after only 6 iterations and with much simpler decoding hardware, a coding gain within 3.5 dB of that of the conventional min-sum belief propagation decoding algorithm.

IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (PACRIM)•Aug 1, 2007•4 citations

Channel-independent weighted bit-flipping decoding algorithm for low-density parity-check codes

T.-C. Chen

In this study, a new method for improving hard-decision bit-flipping (BF) decoding is proposed for low-density parity-check codes. The flipping criterion is derived theoretically from the soft-decision belief-propagation decoding algorithm. The proposed BF decoding algorithm is channel independent and is improved by introducing a more efficient method for computing the reliability of the parity checks. Extensive simulations are provided to demonstrate the efficiency of the proposed algorithm. Simulation results show that the proposed algorithm can achieve about 1.6 dB coding gain improvement at BER=10−5 while reducing up to 53% iterations for decoding and maintaining low-decoding complexity, compared with the conventional weighted BF algorithm.

IET Communications•Nov 27, 2012•10 citations
The Bit-Flipping (BF) algorithm is considered as a hard decoding method for LDPC codes. It is much simpler than the probabilistic methods like Sum Product Algorithm (SPA), and can be efficiently implemented by electronic circuits. In this paper, we propose a new Bit Flipping algorithm for Low-Density Parity-Check codes (LDPC) called Single Bit-Flipping (SBF). Compared to the Gallager Bit-Flipping algorithm, the proposed algorithm employs criteria of flipping single bit chosen carefully. This method eliminates the risk for flipping more than one bit at a time that can induce additional error bits and propagate the errors to the later iterations. We present some results obtained by applying this new method that provides a gain in performance in comparison to the standard Gallager Bit-Flipping with low complexity.
In this paper, a new method for improving hard-decision bit-flipping (BF) decoding is proposed for low-density parity-check codes. The flipping criterion is derived theoretically from the soft-decision belief-propagation decoding algorithm. The proposed BF decoding algorithm is channel independent and is improved by introducing a more efficient method for computing the reliability of the parity checks. Extensive simulations are provided to demonstrate the efficiency of the proposed algorithm. Simulation results show that the proposed algorithm can achieve about 1.5dB coding gain improvement at BER = 5×10−6while reducing up to 48% iterations for decoding and maintaining low decoding complexity, compared with the conventional weighted BF algorithm.
An improved bit-flipping(BF) algorithm with low complexity for decoding structured low-density parity-check codes(LDPC) is proposed to improve the performance of the hard-decision BF algorithm.The hard-decision bits are divided into two groups based on the magnitudes of the received symbols,and at each iteration,the proposed algorithm can flip more than one bit with using two thresholds,and the flipping error probability is effectively decreased.The improved BF algorithm requires some real number comparisons before iterations and requires only logical operations during the iterations.Compared with the weighted bit-flipping algorithm and its modifications,the new method is with significantly lower complexity.Simulations show that the proposed algorithm is provided with very fast convergence speed and excellent performance with significantly low complexity.
In order to improve the bit-flipping (BF) decoding algorithms, a weighted hard-decision based BF decoding algorithm for low-density parity-check (LDPC) codes is presented, in which the weights of variable-nodes are employed. A new metric is defined for the weight of candidate bits not only in unsatisfied parity check equations but also in satisfied ones. The connection between min-sum decoding algorithm and the proposed algorithm is presented. Simulation results show that the new decoding algorithm can provide better FER performance and faster convergence speed than the original candidate bit based bit-flipping (CBBF) algorithm.
An improved iterative bit-flipping(BF) algorithm adapted for decoding low-density parity-check(LDPC) codes is proposed to improve the performance of the hard-decision BF decoding algorithm.The new algorithm uses an alternating threshold pattern to determine the bits whether to be flipped or not,and the flipping error probability is effectively decreased.Simulation results show that compared with BF algorithm,the improved BF algorithm improves both the error-correction performance and the convergence speed while maintaining the low computational complexity.
A new class of iterative bit flipping (BF) decoding algorithms adapted for low-density parity check (LDPC) convolutional codes is proposed. Compared with Gallager's original BF algorithm, the new BF algorithms improve both the coding gain and the error correction speed. At a bit error rate (BER) of 10 , the best of the new bit-flipping algorithms achieves, after only 6 iterations and with much simpler decoding hardware, a coding gain within 3.5 dB of that of the conventional min-sum belief propagation decoding algorithm.
In this study, a new method for improving hard-decision bit-flipping (BF) decoding is proposed for low-density parity-check codes. The flipping criterion is derived theoretically from the soft-decision belief-propagation decoding algorithm. The proposed BF decoding algorithm is channel independent and is improved by introducing a more efficient method for computing the reliability of the parity checks. Extensive simulations are provided to demonstrate the efficiency of the proposed algorithm. Simulation results show that the proposed algorithm can achieve about 1.6 dB coding gain improvement at BER=10−5 while reducing up to 53% iterations for decoding and maintaining low-decoding complexity, compared with the conventional weighted BF algorithm.