A qubit, the quantum counterpart of the classical binary digit, can be constructed based on a system with two possible quantum states. For instance, superconducting circuits have been employed to construct an artificial atom in which ground and excited states are used for two quantum states. The anharmonicity of an artificial atom distinguishes the higher-order excited states from two possible quantum states, although they can interact with the cavity as well. The interaction can be important when a large number of photons are allowed in the cavity and results in a nonlinear effect on a Transmon-cavity system. We studied power-dependent nonlinear behaviors of a Transmon-cavity system. The system exhibits dramatic shifts from a dispersive coupling at a low power regime to punch-out behaviors at high powers. This nonlinearity provides us high fidelity readouts for 2nd excited state as well as 1st excited state.[1]
Achieving fast gates and high-fidelity readout in superconducting quantum circuits often benefits from the use of large amplitude microwave drives. As the strength increases, unwanted effects such as excitation out of the logical states also become more prevalent. In transmon qubits, coherent controls relying on sub-resonant drives are fundamentally limited by the eventual appearance of strong hybridization in the spectrum. Understanding how this threshold depends on intrinsic device parameters is vital for the design and operation of circuits utilizing the transmon as a source of nonlinearity. In this work, we present an experimental study of 14 transmons with a wide range of anharmonicities, and use comparison with Floquet branch analysis and semiclassical simulations to establish a straightforward relationship between the critical value of the effective drive amplitude
ηmax and the ratio
γ=ωq/α, where
ωq is the transmon frequency and
−α is the anharmonicity. For the case where the transmon is used as a parametrically driven coupler, these results further allow us to estimate maximum parametric interaction rates, which informs the circuit design process for optimizing gate rates and fidelities.