We demonstrate for the first time, to the best of our knowledge, a high-speed physical random bit generator at gigabits/second without the time-delay signature based on chaotic power fluctuations of a random fiber laser. The random fiber laser is configured using a ring structure with semiconductor optical amplifiers as the optical gain and a fiber random grating as the random feedback medium. The long-length ring cavity provides a large number of densely spaced cavity modes that co-exist within the gain bandwidth tailored by the optical filter. Unlike fixed cavity modes in conventional fiber ring lasers, these modes are less phase-correlated due to the random distributed feedback from the fiber random grating fabricated by a plane-by-plane inscription technique without phase control, leading to intensified lasing output fluctuations with high-dimensional chaotic dynamic natures without specific cavity features, when the random fiber laser is operated slightly above the lasing threshold. Random bit generation at a bit rate up to ∼1.6 Gbps is achieved with verified randomness through standard tests. Different from the previously reported schemes requiring offline post-processing procedures, this physical random number generator can function in real time, offering high-quality randomness and security assurance for pertinent applications.
We demonstrate for the first time, to the best of our knowledge, a high-speed physical random bit generator at gigabits/second without the time-delay signature based on chaotic power fluctuations of a random fiber laser. The random fiber laser is configured using a ring structure with semiconductor optical amplifiers as the optical gain and a fiber random grating as the random feedback medium. The long-length ring cavity provides a large number of densely spaced cavity modes that co-exist within the gain bandwidth tailored by the optical filter. Unlike fixed cavity modes in conventional fiber ring lasers, these modes are less phase-correlated due to the random distributed feedback from the fiber random grating fabricated by a plane-by-plane inscription technique without phase control, leading to intensified lasing output fluctuations with high-dimensional chaotic dynamic natures without specific cavity features, when the random fiber laser is operated slightly above the lasing threshold. Random bit generation at a bit rate up to ∼1.6 Gbps is achieved with verified randomness through standard tests. Different from the previously reported schemes requiring offline post-processing procedures, this physical random number generator can function in real time, offering high-quality randomness and security assurance for pertinent applications.
True random numbers are essential for cryptography and secure communications. Algorithmically generated pseudo-random numbers lack true physical randomness, while conventional lasers as physical entropy sources introduce time-delay signatures (TDS) and require complex post processing. To address this challenge, this study presents a high speed, real-time true random bit generator utilizing a modeless Raman fiber laser (RFL). A modeless RFL was constructed using an ultra-low reflectivity (-27 dB) fiber Bragg grating (FBG) and a high-reflectivity FBG serving as cavity mirrors. The laser delivers stable modeless Raman lasing within the pump power range of 5 W to 10 W. Compared with multilongitudinal-mode operation, the modeless laser exhibits significantly lower temporal coherence. By truncating the four least significant bits of the 8-bit digitized temporal intensity signal from the modeless RFL, random bit sequences were generated at a rate of 320 Gbps. The resulting random bit stream shows a uniform distribution of bits 0 and 1, its autocorrelation function contains no TDS, and it successfully passes the NIST statistical test. In contrast, the same generation method fails to produce qualified random bits when applied to the Raman fiber laser operating in the multilongitudinal-mode regime. The demonstrated modeless RFL system combines real-time operation, high speed, and stability, offering a robust physical entropy source for cryptographic and secure communication applications.
A simple novel method for random number generation is presented, based on a random Raman fiber laser. This laser is built in a half-open cavity scheme, closed on one side by a narrow-linewidth 100 mm fiber Bragg grating. The interaction between the randomly excited lasing modes of this laser, in addition to nonlinear effects such as modulation instability, allow the generation of random bits at rates of up to 540 Gbps with minimal post processing. Evaluation of the resulting bit streams' randomness by the NIST statistical test suite highlights the importance of evaluating the physical entropy content, as bit sequences generated by this random laser pass all the statistical tests with a significance level of 0.01, despite being generated at more than twice the theoretical entropy generation speed.
Random numbers have great application value in the fields of secure communications, which are commonly used as secret keys to encrypt the information. To guarantee that the information is absolutely secure in the current high-speed communication, the applied random keys should possess a generation speed not less than the encrypted data rate, according to one-time pad theory found by Shannon (Shannon C E 1949 Bell.Syst.Tech.J. 28 656) Pseudo-random numbers generated by algorithm may easily reach a fast speed, but a certain periodicity makes them difficult to meet the aforementioned demand of information security. Utilizing physical stochastic phenomena can provide reliable random numbers, called physical random number generators (RNGs). However, limited by the bandwidth of the conventional physical sources such as electronic noise, frequency jitter of oscillator and quantum randomness, the traditional physical RNG has a generation speed at a level of Mb/s typically. Therefore, real-time and ultrafast physical random number generation is urgently required from the view of absolute security for high-speed communication today. With the advent of wideband photonic entropy sources, in recent years lots of schemes for high-speed random number generation are proposed. Among them, chaotic laser has received great attention due to its ultra-wide bandwidth and large random fluctuation of intensity. The real-time speed of physical RNG based on chaotic laser is now limited under 5 Gb/s, although the reported RNG claims that an ultrafast speed of Tb/s is possible in theory. The main issues that restrict the real-time speed of RNG based on chaotic laser are from two aspects. The first aspect is electrical jitter bottleneck confronted by the electrical analog-to-digital converter (ADC). Specifically, most of the methods of extracting random numbers are first to convert the chaotic laser into an electrical signal by a photo-detector, then use an electrical ADC driven by radio frequency (RF) clock to sample and quantify the chaotic signal in electronic domain. Unfortunately, the response rate of ADC is below Gb/s restricted by the aperture jitter (several picoseconds) of RF clock in the sample and hold circuit. The second aspect comes from the complex post-processes, which are fundamental in current RNG techniques to realize a good randomness. The strict synchronization among post-processing components (e.g., XOR gates, memory buffers, high-order difference) is controlled by an RF clock. Similarly, it is also an insurmountable obstacle to achieve an accurate synchronization due to the electronic jitter of the RF clock. In this paper, we propose a method of ultrafast multi-bit physical RNG based on chaotic laser without any post-process. In this method, a train of optical pulses generated by a GHz mode-locked laser with low temporal jitter at a level of fs is used as an optical sampling clock. The chaotic laser is sampled in the optical domain through a low switching energy and high-linearity terahertz optical asymmetric demultiplexer (TOAD) sampler, which is a fiber loop with an asymmetrical nonlinear semiconductor optical amplifier. Then, the peak amplitude of each sampled chaotic pulse is digitized by a multi-bit comparator (i.e., a multi-bit ADC without sample and hold circuit) and converted into random numbers directly. Specifically, a proof-of-principle experiment is executed to demonstrate the aforementioned proposed method. In this experiment, an optical feedback chaotic laser is used, which has a bandwidth of 6 GHz. Through setting a sampling rate to be 5 GSa/s and selecting 4 LSBs outputs of the 8-bit comparator, 20 Gb/s (=5 GSa/s4 LSBs) physical random number sequences are obtained. Considering the ultrafast response rate of TOAD sampler, the speed of random numbers generated by this method has the potential to reach several hundreds of Gb/s as long as the used chaotic laser has a sufficient bandwidth.
We report a 12.5 Gb/s physical random number generator (RNG) that uses high-speed threshold detection of the spectrally-sliced incoherent light produced by a fiber amplifier. The system generates a large-amplitude, easily measured, fluctuating signal with bandwidth that is constrained only by the optical filter and electrical detector used. The underlying physical process (spontaneous emission) is inherently quantum mechanical in origin, and therefore cannot be described deterministically. Unlike competing optical RNG approaches that require photon counting electronics, chaotic laser cavities, or state-of-the-art analog-to-digital converters, the system employs only commonly available telecommunications-grade fiber optic components and can be scaled to higher speeds or multiplexed into parallel channels. The quality of the resulting random bitstream is verified using industry-standard statistical tests.
True random numbers occupy a core role in the field of encryption and security by virtue of their properties such as unpredictability and independence. In this paper, we propose a high-speed physical random number generator based on a dual-emission random fiber laser. The system improves the spectral bandwidth characteristics of the output signals by adjusting the pump power and the feedback length of the single mode fiber. This study effectively suppresses the autocorrelation feature by performing exclusive-OR operations on the forward and backward random laser signals, and obtain the random number sequence with a generation rate of 20 Gbps by post-processing with high-order finite difference and least significant bit extraction. In order to verify the practical application performance, we apply the random sequence as encryption key to digital image encryption, and the experimental results show that the generator has both theoretical security and practical application value.
True random numbers with high security originate from non-deterministic physical processes. Random laser with random feedback arising from multiple elastic scattering in a highly disordered structure is an ideal physical entropy source theoretically. In this work, a secure optical ultrafast random number generator based on random laser spectra was demonstrated. Unlike the usual method of recording laser intensity over time, the random laser spectrum under each pump pulse was recorded and converted into random numbers through post-processing. Approaches in three different dimensions—space, spectrum and time were used to increase the rate of random number generation. The randomness of resulting random bit streams was verified by the NIST statistics tests. Experimental results showed that an instantaneous bit rate of 810 terabits per second with off-line post-processing could be theoretically reached with an ideal experimental condition. This novel technique has big advantages in secure communications and promises to further increase the speed of random number generators to the lever of petabits per second or even higher.