Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

Improving Windowed Decoding of SC LDPC Codes by Effective Decoding Termination, Message Reuse, and Amplification

Inayat Ali, Jong-Hwan Kim, Sang‐Hyo Kim, Heeyoul Kwak, Jong‐Seon No

Published Nov 8, 2017• 23 citations
Publisher

Abstract

In this paper, we address a number of weaknesses of the windowed decoding of spatially coupled low-density parity-check (SC LDPC) codes and propose three modifications that simultaneously improve its performance, complexity, and latency. An effective termination method of the windowed decoding and the reuse of edge messages of previous target symbols provide a good performance-latency tradeoff when compared with the conventional windowed decoder. Also, we propose a scheme that lowers the error floor, in which the amplified edge messages of the previous window are used in the present window. The proposed windowed decoding, consisting of the three schemes, provides a significant performance gain with smaller latency. The validity of the new windowed decoding is verified by the evaluation with codes from different SC LDPC ensembles.

DOI
10.1109/access.2017.2771375

Related papers

Effective bi-directional overlapped sliding window decoding of SC-LDPC codes

Jiho Kim, Hyeong‐Gun Joo, Dong‐Joon Shin

In this paper, a bi-directional sliding window decoder is proposed for spatially coupled low-density parity-check (SC-LDPC) codes, which improves the decoding complexity and performance compared to the conventional sliding window decoding (SWD) by sharing messages at the overlapped part of forward and backward decoding windows. Moreover, by using proper scaling factors that determine the weight of each message at the overlapped part of two sliding windows, good local decoding effects can be efficiently spread out to both ends of SC-LDPC code during decoding process. Such effective message updates of the proposed bi-directional overlapped sliding window decoding (BO-SWD) improve error floor performance compared to the conventional SWD. The validity of BO-SWD is verified by simulation with various SC-LDPC ensembles.

ICT Express•Nov 16, 2023•2 citations

Improved sliding window decoding of spatially coupled low-density parity-check codes

Shiyuan Mo, Li Chen

Spatially coupled low-density parity-check (SC-LDPC) codes can achieve capacity approaching performance with a small message recovery latency due to the sliding window decoding (SWD). Using a partial Tanner graph, the SWD performs iterative message passing until the average error probability Peof the target symbols falls below a threshold or the maximum iteration number is reached. However, Pedoes not decrease monotonically as iteration progresses. This implies the symbol likelihoods that were yielded when the decoding terminates may not be optimal for making decisions. Therefore, this paper proposes an improved SWD (ISWD) for SC-LDPC codes. The proposal monitors the achievable minimum of Peand stores its associated likelihoods, so that when the decoding terminates the target symbols will be estimated based on the stored likelihoods. Our research shows the ISWD is able to enhance the decoding performance, especially in the waterfall region. It exhibits an asymptotic convergence to the SWD performance. A complexity reducing variant of the ISWD is also proposed to facilitate the decoding but at the cost of error-correction performance.

IEEE Information Theory Workshop (ITW)•Nov 1, 2017•11 citations

Reliability-Based Windowed Decoding for Spatially Coupled LDPC Codes

Peng Kang, Yixuan Xie, Lei Yang +1 more

In this letter, we propose a reliability-based windowed decoding scheme for spatially coupled (SC) low-density parity-check (LDPC) codes. To mitigate the error propagation along the sliding windowed decoder of the SC LDPC codes, a partial message reservation method is proposed where only the reliable messages generated in the previous decoding window are reserved for the next decoding window. We also propose a partial syndrome check stopping rule for each decoding window, in which only the complete variable nodes are checked. Simulation results show that our proposed scheme significantly improves the error-floor performance compared to the sliding windowed decoder with the conventional weighted bit-flipping algorithm.

arXiv:1805.02902•IEEE Communications Letters•May 11, 2018•21 citations

An Efficient Encoding Method for Spatially Coupled Low-Density Parity-Check Codes

Zhanji Wu, Min Zhao, Shuoshuo Wang

In this paper, an efficient encoding scheme for spatially coupled low-density parity-check (SC-LDPC) codes is proposed. In order to lower the error floor, we optimize the degree distribution of SC-LDPC codes and propose a split variable nodes algorithm constructing sub-matrices with large girth of SC-LDPC codes. The corresponding sliding window decoding is studied as well to fasten the decoding convergence. Simulation results show that on the AWGN channel, SC-LDPC codes can obtain better error performance, lower decoding complexity and faster decoding convergence as compared with the LDPC block codes (LDPC-BC).

IEEE International Conference on Computer and Communications (ICCC)•Dec 1, 2019•0 citations

Avoiding trapping sets in SC-LDPC codes under windowed decoding

Allison Beemer, Christine A. Kelley

Spatially coupled low-density parity-check (SC-LDPC) codes are sparse graph codes that have recently become of interest due to their capacity-approaching performance on memoryless binary input channels. Moreover, protograph SC-LDPC codes have been shown to be asymptotically good under certain conditions. SC-LDPC codes are amenable to a windowed decoder that allows decoding of blocks of bits to be done serially, making them good candidates for applications such as streaming. Depending on how they are constructed, however, the codes may still be prone to error floors. One key element in protograph SC-LDPC code design is the edge-spreading method used to couple copies of the base protograph in the construction of the SC-protograph. In this paper, we present an edge-spreading algorithm that is designed to remove trapping sets from the resulting SC-protograph that are harmful with respect to the windowed decoder, and we examine how to determine which trapping sets should be removed in the construction.

International Symposium on Information Theory and its Applications•Oct 1, 2016•12 citations

The optimized sliding window layered decoding algorithm for SC LDPC codes

Jiayi Sun, Xiurong Ma, Yunlong Shan

This study investigates the Layered Sliding Window Decoding (LSWD) algorithm for Spatially Coupled Low-Density Parity-Check (SC LDPC) codes and proposes an enhanced decoding approach, the Improved Sliding Window Layered Decoding (ILSWD). While the LSWD algorithm reduces decoding latency and iteration counts compared to traditional Sliding Window Decoding (SWD), it does not significantly improve decoding performance. To address this, the ILSWD algorithm incorporates dynamic sliding window techniques, reorganizes decoding layers, and intro-duces suppression factors when errors enter the extended sliding window. Simulation results for 5G SC LDPC codes with single-sided coupling demonstrate that ILSWD achieves a 0.25 dB gain over LSWD at a specific bit error rate, alongside a notable improvement in decoding iteration rate. These findings highlight that ILSWD overcome the limitations of LSWD, offering a more efficient decoding solution with enhanced performance for SC LDPC codes in 5G applications.

International Conference on Digital Signal and Computer Communications (DSCC)•Jul 7, 2025•0 citations
In this paper, we address a number of weaknesses of the windowed decoding of spatially coupled low-density parity-check (SC LDPC) codes and propose three modifications that simultaneously improve its performance, complexity, and latency. An effective termination method of the windowed decoding and the reuse of edge messages of previous target symbols provide a good performance-latency tradeoff when compared with the conventional windowed decoder. Also, we propose a scheme that lowers the error floor, in which the amplified edge messages of the previous window are used in the present window. The proposed windowed decoding, consisting of the three schemes, provides a significant performance gain with smaller latency. The validity of the new windowed decoding is verified by the evaluation with codes from different SC LDPC ensembles.
In this paper, a bi-directional sliding window decoder is proposed for spatially coupled low-density parity-check (SC-LDPC) codes, which improves the decoding complexity and performance compared to the conventional sliding window decoding (SWD) by sharing messages at the overlapped part of forward and backward decoding windows. Moreover, by using proper scaling factors that determine the weight of each message at the overlapped part of two sliding windows, good local decoding effects can be efficiently spread out to both ends of SC-LDPC code during decoding process. Such effective message updates of the proposed bi-directional overlapped sliding window decoding (BO-SWD) improve error floor performance compared to the conventional SWD. The validity of BO-SWD is verified by simulation with various SC-LDPC ensembles.
Spatially coupled low-density parity-check (SC-LDPC) codes can achieve capacity approaching performance with a small message recovery latency due to the sliding window decoding (SWD). Using a partial Tanner graph, the SWD performs iterative message passing until the average error probability Peof the target symbols falls below a threshold or the maximum iteration number is reached. However, Pedoes not decrease monotonically as iteration progresses. This implies the symbol likelihoods that were yielded when the decoding terminates may not be optimal for making decisions. Therefore, this paper proposes an improved SWD (ISWD) for SC-LDPC codes. The proposal monitors the achievable minimum of Peand stores its associated likelihoods, so that when the decoding terminates the target symbols will be estimated based on the stored likelihoods. Our research shows the ISWD is able to enhance the decoding performance, especially in the waterfall region. It exhibits an asymptotic convergence to the SWD performance. A complexity reducing variant of the ISWD is also proposed to facilitate the decoding but at the cost of error-correction performance.
In this letter, we propose a reliability-based windowed decoding scheme for spatially coupled (SC) low-density parity-check (LDPC) codes. To mitigate the error propagation along the sliding windowed decoder of the SC LDPC codes, a partial message reservation method is proposed where only the reliable messages generated in the previous decoding window are reserved for the next decoding window. We also propose a partial syndrome check stopping rule for each decoding window, in which only the complete variable nodes are checked. Simulation results show that our proposed scheme significantly improves the error-floor performance compared to the sliding windowed decoder with the conventional weighted bit-flipping algorithm.
In this paper, an efficient encoding scheme for spatially coupled low-density parity-check (SC-LDPC) codes is proposed. In order to lower the error floor, we optimize the degree distribution of SC-LDPC codes and propose a split variable nodes algorithm constructing sub-matrices with large girth of SC-LDPC codes. The corresponding sliding window decoding is studied as well to fasten the decoding convergence. Simulation results show that on the AWGN channel, SC-LDPC codes can obtain better error performance, lower decoding complexity and faster decoding convergence as compared with the LDPC block codes (LDPC-BC).
Spatially coupled low-density parity-check (SC-LDPC) codes are sparse graph codes that have recently become of interest due to their capacity-approaching performance on memoryless binary input channels. Moreover, protograph SC-LDPC codes have been shown to be asymptotically good under certain conditions. SC-LDPC codes are amenable to a windowed decoder that allows decoding of blocks of bits to be done serially, making them good candidates for applications such as streaming. Depending on how they are constructed, however, the codes may still be prone to error floors. One key element in protograph SC-LDPC code design is the edge-spreading method used to couple copies of the base protograph in the construction of the SC-protograph. In this paper, we present an edge-spreading algorithm that is designed to remove trapping sets from the resulting SC-protograph that are harmful with respect to the windowed decoder, and we examine how to determine which trapping sets should be removed in the construction.
This study investigates the Layered Sliding Window Decoding (LSWD) algorithm for Spatially Coupled Low-Density Parity-Check (SC LDPC) codes and proposes an enhanced decoding approach, the Improved Sliding Window Layered Decoding (ILSWD). While the LSWD algorithm reduces decoding latency and iteration counts compared to traditional Sliding Window Decoding (SWD), it does not significantly improve decoding performance. To address this, the ILSWD algorithm incorporates dynamic sliding window techniques, reorganizes decoding layers, and intro-duces suppression factors when errors enter the extended sliding window. Simulation results for 5G SC LDPC codes with single-sided coupling demonstrate that ILSWD achieves a 0.25 dB gain over LSWD at a specific bit error rate, alongside a notable improvement in decoding iteration rate. These findings highlight that ILSWD overcome the limitations of LSWD, offering a more efficient decoding solution with enhanced performance for SC LDPC codes in 5G applications.