We experimentally demonstrate storage and on-demand release of phase-sensitive, photon-number superposition states of the form α|0⟩+βe^{iθ}|1⟩ for an optical quantized oscillator mode. For this purpose, we newly developed a phase-probing mechanism compatible with a storage system composed of two concatenated optical cavities, which was previously employed for storage of phase-insensitive single-photon states [Phys. Rev. X 3, 041028 (2013)PRXHAE2160-330810.1103/PhysRevX.3.041028]. This is the first demonstration of all-optically storing highly nonclassical and phase-sensitive quantum states of light. The strong nonclassicality of the states after storage becomes manifest as a negative region in the corresponding Wigner function shifted away from the origin in phase space. This negativity is otherwise, without the phase information of the memory system, unobtainable. While our scheme includes the possibility of optical storage, on-demand release and synchronization of arbitrary single-rail qubit states, it is not limited to such states. In fact, our technique is extendible to more general phase-sensitive states such as multiphoton superposition or entangled states, and thus it represents a significant step toward advanced optical quantum information processing, where highly nonclassical states are utilized as resources.
Quantum memory is a key component of quantum networks. A successful development in enabling the distribution of quantum information requires the storage of single-photon light. Usually quantum information is encoded using a 2D space, spanned, for example, by the orthogonal polarization states of a photon. In this case, each photon carries a quantum bit of information. If the photon could be encoded in a high-dimensional space instead, the information carried by each photon could be increased from a bit to |
log2d| bits, where d is the dimension of the Hilbert space in which the photon is described. The channel capacity of the network and the transmission efficiency would then be greatly enlarged [1]. Moreover, storing high-dimensional states in quantum memory can reduce its sensitivity to memory coherence time [2], leading to significant improvements in storage capacity [3]. It is thus no surprise that many research groups are actively working on different physical systems for storing light encoded using a high-dimensional space. The degrees of freedom for position, linear momentum, time-bin or orbital angular momentum (OAM) of a photon can all be considered as a high-dimensional space for encoding. The photon's OAM has the most potential for encoding [4]. Electromagnetic waves have both spin and OAM. Spin angular momentum produces polarization. Photons with OAM can be regarded as helices with left and right handedness twisted to varying degrees (Fig. 1). Information is encoded using this handedness and the amount of twist. Because of the inherent infinite degrees of freedom for OAM, a photon can in principle carry an arbitrarily large amount of information, and hence the eagerness to store light encoded in OAM space. Although some work on this has been reported for different physical systems, what is lacking is a way of storing and releasing at some later time a true single photon, including its shape and structure [5–7]. Constructing this basic element of quantum memory has been a major challenge. The wavefront of an OAM light is a helical structure (left and center), with an optical vortex at its center in the intensity distribution of light (right). The vortex of light can carry non-zero OAM of any order m. OAM states of a different order are orthogonal. A group at the Key Laboratory of Quantum Information, Chinese Academy of Science, at the University of Science and Technology of China finally resolved this problem [8]. They reported on the first experimental realization of a true single-photon-carrying OAM stored via electromagnetically induced transparency (EIT) in a cold atomic ensemble (Fig. 2). With such a suitable candidate, this work indicates a means of constructing high-dimensional quantum memory. After this, similar results were reported by Laurat's group at Laboratoire Kastler Brossel, at Université Pierre et Marie Curie in France [9], where an extremely weak laser at single-photon level carrying OAM was also stored via EIT in a cold atomic ensemble. Ding et al. [8] first prepared two cold 85Rb atomic clouds in two magnetic-optical traps (MOT) using laser cooling and trapping techniques. They generated non-classical correlated photon pairs using spontaneous four-wave mixing in an atomic cloud. One photon of each pair was used as a trigger; the other mapped and stored in a second atomic cloud via EIT. Each photon to be stored carried one OAM unit. After a programed storage time, the photon was retrieved. What they achieved during storage included (1) proof that the non-classical correlation between the trigger photon and the retrieved photon is retained by demonstrating a strong violation of the Cauchy–Schwarz inequality, (2) a demonstration that the single-photon property of the signal photon is maintained by performing the Hanbury–Brown and Twiss experiment on the trigger photon, (3) proof that the spatial structure of the photon is also very well preserved by showing a high similarity between input and output, and (4) evidence, gathered by Sagnac interferometry, that the coherence of a single photon is also preserved. A heralded single photon is generated through spontaneous four-wave mixing in MOT 1 (a); this single photon carrying OAM is then stored through EIT in MOT 2 (b); (c) shows an image of the photon carrying OAM. Experimental measurements in the transverse position of the image carried by the photon before and after storage are presented in (d) and (e), respectively; (f) shows the simplified experimental setup for storage of a superposition of OAM. Interference patterns taken at different angle settings of the half-wave plate are shown in (g). The left column represents the experimental angle settings of the half-wave and the quarter-wave plates, the middle column gives the experimental results, and the right column gives results from theoretical simulations; (h) and (i) present the interference patterns of the input signal photon and the retrieved signal with plate angle, respectively. This is a significant breakthrough towards the realization of a quantum internet and, potentially, quantum computing. This work addresses the ability to generate, store, retrieve on demand an arbitrary single-photon-level photonic state encoded in OAM space. It signifies an important step in the development of practical quantum-enabled technologies, opens up the possibility for realizing high-dimensional quantum memories based on this degree of freedom of light, and will have a large impact in a broad physical community, especially in the quantum information and quantum optics communities. The Technology Review website of MIT comments on their work very positively with an article entitled ‘First Quantum Memory That Records the Shape of a Single Photon Unveiled in China’. Further, Nature Photonics selected this work as a research highlight. Clearly, memory that can preserve the spatial structure of photons will make the internet far more flexible and capable. Of course, there are still many basic problems remaining that need to be solved to build the future quantum internet, one of which is the construction of quantum memory exploiting entanglement. This derives from the fact that a quantum network needs the distribution of quantum-entangled photons over channels between different nodes [10]. A high-dimensional quantum internet needs to store OAM-entangled states and perform entanglement swapping to efficiently extend the achievable communication distances. While Ding et al. [8] reported the storage of light with OAM at the single-photon level, the photon was, however, still encoded in a 2D space. Therefore, whether it is possible to construct a high-dimensional quantum memory remains an open issue that needs to be investigated further.
Summary form only given. We discuss an efficient scheme which is elegant in its simplicity. By encoding the quantum information in multi-photon coherent states, rather than single photon states, simple optical manipulations acquire unexpected power. The required resource, which may be produced non-deterministically, is a superposition of the vacuum and a coherent state. Given this, the scheme is deterministic and requires only simple linear optics and photon counting. Qubit readout uses homodyne detection.
Quantum optical memories are a key component in a variety of quantum information applications, from extending quantum communication channels to building high-efficiency single-photon sources to enabling protocols requiring multiple synchronized qubits. However, most current photon storage systems utilize light-matter interactions and are therefore not broadband; meanwhile the available broader-bandwidth photon storage systems operate with somewhat shorter storage times or require cryogenic operation. Here we develop a system with multiplexed free-space storage cavities, able to store single photons with high efficiency over variable delays, up to 12.5 µs, and over multiple nanometers bandwidth at room temperature. The system can store multiple qubits encoded in various degrees of freedom (e.g., time-bin, and polarization) simultaneously. The work presented here has demonstrated storage of polarization states for 1.25 µs and retrieval through single-mode fiber with a state fidelity >99% and efficiency 82%.
Non-classical light is both easily encoded with quantum information and robust against decoherence, making it a key resource that enables many quantum information applications including quantum computing, quantum communication, and quantum metrology. We present a wide range of experimental and theoretical research toward the generation, detection, characterization, and storage of non-classical states of light with an eye toward quantum information applications. To provide a basis for the rest of the work, we begin by discussing theoretically the role of photon number statistics in optical quantum information and the use of second-order optical coherence to characterize non-classical light. Building on that, we present an original tool for the difficult problem of reconstructing the underlying mode distribution of multi-mode optical fields using simple measurements of higher-order optical coherence. We then move on to the problem of generating and storing single photons. We do this in a solid-state medium, a rare-earth ion-doped crystal, with a long-lived spin transition ideal for storing quantum information. We experimentally demonstrate the feasibility of this concept by showing correlations between the optical fields that herald storage and retrieval of collective excitations. This scheme can be used for the two important and distinct applications of generating single photons on-demand and storing quantum information and entanglement. The detection of non-classical light is a task as important as its generation. To this end, we study detectors with near unity detection efficiency and photon number resolution for use in quantum-enabled metrology. We use such a detector to experimentally demonstrate compression of spatial fringes and investigate the possibility of improving measurement resolution with classical and non-classical light. Finally, we report a set of experiments using photon number statistics to characterize classical and non-classical light. We measure suppression of unwanted multi-photon emission in a heralded single photon source based on four-wave mixing in microstructure optical fiber. And we, for the first time, experimentally demonstrate reconstruction of multi-mode classical and non-classical light from measured photon number statistics.
Photon counting induces an effective non-linear optical phase shift in certain states derived by linear optics from single photons. Although this non-linearity is non-deterministic, it is sufficient in principle to allow scalable linear optics quantum computation (LOQC). The most obvious way to encode a qubit optically is as a superposition of the vacuum and a single photon in one mode—so-called ‘single-rail’ logic. Until now this approach was thought to be prohibitively expensive (in resources) compared to ‘dual-rail’ logic where a qubit is stored by a photon across two modes. Here we attack this problem with real-time feedback control, which can realize a quantum-limited phase measurement on a single mode, as has been recently demonstrated experimentally. We show that with this added measurement resource, the resource requirements for single-rail LOQC are not substantially different from those of dual-rail LOQC. In particular, with adaptive phase measurements an arbitrary qubit state can be prepared deterministically .