Transient conductance between Fermi and Luttinger liquids

Although the intrinsic conductance of an interacting one-dimensional system is renormalized by the electron-electron correlations, it has been known for some time that this renormalization is washed out by the presence of the (noninteracting) electrodes to which the wire is connected. Here, we study the transient conductance of such a wire: a finite voltage bias is suddenly applied across the wire and we measure the current before it has enough time to reach its stationary value. These calculations allow us to extract the Sharvin (contact) resistance of Luttinger and Fermi liquids. In particular, we find that a perfect junction between a Fermi liquid electrode and a Luttinger liquid electrode is characterized by a contact resistance that consists of half the quantum of conductance in series with half the intrinsic resistance of an infinite Luttinger liquid. These results were obtained using two different methods: a dynamical Hartree-Fock approach and a self-consistent Boltzmann approach. Although these methods are formally approximate, we find a perfect match with the exact results of Luttinger/Fermi liquid theory.Although the intrinsic conductance of an interacting one-dimensional system is renormalized by the electron-electron correlations, it has been known for some time that this renormalization is washed out by the presence of the (noninteracting) electrodes to which the wire is connected. Here, we study the transient conductance of such a wire: a finite voltage bias is suddenly applied across the wire and we measure the current before it has enough time to reach its stationary value. These calculations allow us to extract the Sharvin (contact) resistance of Luttinger and Fermi liquids. In particular, we find that a perfect junction between a Fermi liquid electrode and a Luttinger liquid electrode is characterized by a contact resistance that consists of half the quantum of conductance in series with half the intrinsic resistance of an infinite Luttinger liquid. These results were obtained using two different methods: a dynamical Hartree-Fock approach and a self-consistent Boltzmann approach. Although these methods are formally approximate, we find a perfect match with the exact results of Luttinger/Fermi liquid theory.

arXiv:1710.00895Physical review. B./Physical review. BApr 23, 201813 citations

Conductance of Tomonaga-Luttinger liquid wires and junctions with resistances

Abhiram Soori, Diptiman Sen

We study the effect that resistive regions have on the conductance of a quantum wire with interacting electrons which is connected to Fermi liquid leads. Using the bosonization formalism and a Rayleigh dissipation function to model the power dissipation, we use both scattering theory and Green's function techniques to derive the DC conductance. The resistive regions are generally found to lead to incoherent transport. For a single wire, we find that the resistance adds in series to the contact resistance of h/e(2) for spinless electrons, and the total resistance is independent of the Luttinger parameter K-W of the wire. We numerically solve the bosonic equations to illustrate what happens when a charge density pulse is incident on the wire; the results depend on the parameters of the resistive and interacting regions in interesting ways. For a junction of Tomonaga-Luttinger liquid wires, we use a dissipationless current splitting matrix to model the junction. For a junction of three wires connected to Fermi liquid leads, there are two families of such matrices; we find that the conductance matrix generally depends on K-W for one family but is independent of K-W for the other family, regardless of the resistances present in the system. Copyright (c) EPLA, 2011We study the effect that resistive regions have on the conductance of a quantum wire with interacting electrons which is connected to Fermi liquid leads. Using the bosonization formalism and a Rayleigh dissipation function to model the power dissipation, we use both scattering theory and Green's function techniques to derive the DC conductance. The resistive regions are generally found to lead to incoherent transport. For a single wire, we find that the resistance adds in series to the contact resistance of h/e(2) for spinless electrons, and the total resistance is independent of the Luttinger parameter K-W of the wire. We numerically solve the bosonic equations to illustrate what happens when a charge density pulse is incident on the wire; the results depend on the parameters of the resistive and interacting regions in interesting ways. For a junction of Tomonaga-Luttinger liquid wires, we use a dissipationless current splitting matrix to model the junction. For a junction of three wires connected to Fermi liquid leads, there are two families of such matrices; we find that the conductance matrix generally depends on K-W for one family but is independent of K-W for the other family, regardless of the resistances present in the system. Copyright (c) EPLA, 2011

Mar 1, 20117 citations

Conductance of Tomonaga-Luttinger liquid wires and junctions with resistances

Abhiram Soori, Diptiman Sen

We study the effect that resistive regions have on the conductance of a quantum wire with interacting electrons which is connected to Fermi liquid leads. Using the bosonization formalism and a Rayleigh dissipation function to model the power dissipation, we use both scattering theory and Green's function techniques to derive the DC conductance. The resistive regions are generally found to lead to incoherent transport. For a single wire, we find that the resistance adds in series to the contact resistance of h / e 2 for spinless electrons, and the total resistance is independent of the Luttinger parameter K W of the wire. We numerically solve the bosonic equations to illustrate what happens when a charge density pulse is incident on the wire; the results depend on the parameters of the resistive and interacting regions in interesting ways. For a junction of Tomonaga-Luttinger liquid wires, we use a dissipationless current splitting matrix to model the junction. For a junction of three wires connected to Fermi liquid leads, there are two families of such matrices; we find that the conductance matrix generally depends on K W for one family but is independent of K W for the other family, regardless of the resistances present in the system.We study the effect that resistive regions have on the conductance of a quantum wire with interacting electrons which is connected to Fermi liquid leads. Using the bosonization formalism and a Rayleigh dissipation function to model the power dissipation, we use both scattering theory and Green's function techniques to derive the DC conductance. The resistive regions are generally found to lead to incoherent transport. For a single wire, we find that the resistance adds in series to the contact resistance of h / e 2 for spinless electrons, and the total resistance is independent of the Luttinger parameter K W of the wire. We numerically solve the bosonic equations to illustrate what happens when a charge density pulse is incident on the wire; the results depend on the parameters of the resistive and interacting regions in interesting ways. For a junction of Tomonaga-Luttinger liquid wires, we use a dissipationless current splitting matrix to model the junction. For a junction of three wires connected to Fermi liquid leads, there are two families of such matrices; we find that the conductance matrix generally depends on K W for one family but is independent of K W for the other family, regardless of the resistances present in the system.

arXiv:1011.5058Europhysics Letters (EPL)Mar 1, 201113 citations

Conductance through contact barriers of a finite-length quantum wire

Siddhartha Lal, Sumathi Rao, Diptiman Sen

We use the technique of bosonization to understand a variety of recent experimental results on the conductivity of a quantum wire. The quantum wire is taken to be a finite-length Luttinger liquid connected on two sides to semi-infinite Fermi liquids through contacts. The contacts are modeled as (short) Luttinger liquids bounded by localized one-body potentials. We use effective actions and the renormalization group to study the effects of electronic interactions within the wire, the length of the wire, finite temperature, and a magnetic field, on the conductivity. We explain the deviations of the conductivity from ${2Ne}^{2}/h$ in wires that are not too short as arising from renormalization effects caused by the repulsive interactions. We also explain the universal conductance corrections observed in different channels at higher temperatures. We study the effects of an external magnetic field on electronic transport through this system and explain why odd and even spin-split bands show different renormalizations from the universal conductance values. We discuss the case of resonant transmission and of the possibility of producing a spin valve that only allows electrons of one value of the spin to go through. We compare our results for the conductance corrections with experimental observations. We also propose an experimental test of our model of the contact regions.We use the technique of bosonization to understand a variety of recent experimental results on the conductivity of a quantum wire. The quantum wire is taken to be a finite-length Luttinger liquid connected on two sides to semi-infinite Fermi liquids through contacts. The contacts are modeled as (short) Luttinger liquids bounded by localized one-body potentials. We use effective actions and the renormalization group to study the effects of electronic interactions within the wire, the length of the wire, finite temperature, and a magnetic field, on the conductivity. We explain the deviations of the conductivity from ${2Ne}^{2}/h$ in wires that are not too short as arising from renormalization effects caused by the repulsive interactions. We also explain the universal conductance corrections observed in different channels at higher temperatures. We study the effects of an external magnetic field on electronic transport through this system and explain why odd and even spin-split bands show different renormalizations from the universal conductance values. We discuss the case of resonant transmission and of the possibility of producing a spin valve that only allows electrons of one value of the spin to go through. We compare our results for the conductance corrections with experimental observations. We also propose an experimental test of our model of the contact regions.

arXiv:cond-mat/0104402Physical review. B, Condensed matterApr 22, 200213 citations

Transport properties of a two-lead Luttinger-liquid junction out of equilibrium: Fermionic representation

D. N. Aristov, P. Wölfle

The electrical current through an arbitrary junction connecting quantum wires of spinless interacting fermions is calculated in fermionic representation. The wires are adiabatically attached to two reservoirs at chemical potentials differing by the applied voltage bias. The relevant scale-dependent contributions in perturbation theory in the interaction up to infinite order are evaluated and summed up. The result allows one to construct renormalization group equations for the conductance as a function of voltage (or temperature, wire length). There are two fixed points at which the conductance follows a power law in terms of a scaling variable $\ensuremath{\Lambda}$, which equals the bias voltage $V$ , if $V$ is the largest energy scale compared to temperature $T$ and inverse wire length ${L}^{\ensuremath{-}1}$, and interpolates between these quantities in the crossover regimes.The electrical current through an arbitrary junction connecting quantum wires of spinless interacting fermions is calculated in fermionic representation. The wires are adiabatically attached to two reservoirs at chemical potentials differing by the applied voltage bias. The relevant scale-dependent contributions in perturbation theory in the interaction up to infinite order are evaluated and summed up. The result allows one to construct renormalization group equations for the conductance as a function of voltage (or temperature, wire length). There are two fixed points at which the conductance follows a power law in terms of a scaling variable $\ensuremath{\Lambda}$, which equals the bias voltage $V$, if $V$ is the largest energy scale compared to temperature $T$ and inverse wire length ${L}^{\ensuremath{-}1}$, and interpolates between these quantities in the crossover regimes.

arXiv:1408.4914Physical Review BDec 8, 201411 citations

Two-wire junction of inequivalent Tomonaga-Luttinger liquids

Yao-Tai Kang, Chung-Yu Lo, Masaki Oshikawa +2 more

We develop two numerical schemes to study the conductance of the two-wire junction of inequivalent Tomonaga-Luttinger liquids. In the first scheme we use the static current-current correlation function across the junction to extract the linear conductance through a relation that is derived via the bosonization method. In the second scheme we apply a voltage bias and evaluate the time-dependent current across the junction to obtain the current-voltage characteristic. The conductance is then extracted from the small bias result within the linear response regime. Both schemes are based on the infinite-size matrix product state to minimize the finite-size effects. Due to the lack of the translational invariance, we focus on a finite-size window containing the junction. For time-independent calculations, we use infinite boundary conditions to evaluate the correlations within the window. For time-dependent calculations, we use the window technique to evaluate the local currents within the window. The numerical results obtained by both schemes show excellent agreement with the analytical predictions.We develop two numerical schemes to study the conductance of the two-wire junction of inequivalent Tomonaga-Luttinger liquids. In the first scheme we use the static current-current correlation function across the junction to extract the linear conductance through a relation that is derived via the bosonization method. In the second scheme we apply a voltage bias and evaluate the time-dependent current across the junction to obtain the current-voltage characteristic. The conductance is then extracted from the small bias result within the linear response regime. Both schemes are based on the infinite-size matrix product state to minimize the finite-size effects. Due to the lack of the translational invariance, we focus on a finite-size window containing the junction. For time-independent calculations, we use infinite boundary conditions to evaluate the correlations within the window. For time-dependent calculations, we use the window technique to evaluate the local currents within the window. The numerical results obtained by both schemes show excellent agreement with the analytical predictions.

arXiv:2105.03104Physical review. B./Physical review. BDec 22, 20214 citations

{2Ne}^{2}/h

in wires that are not too short as arising from renormalization effects caused by the repulsive interactions. We also explain the universal conductance corrections observed in different channels at higher temperatures. We study the effects of an external magnetic field on electronic transport through this system and explain why odd and even spin-split bands show different renormalizations from the universal conductance values. We discuss the case of resonant transmission and of the possibility of producing a spin valve that only allows electrons of one value of the spin to go through. We compare our results for the conductance corrections with experimental observations. We also propose an experimental test of our model of the contact regions.

V

, if

V

is the largest energy scale compared to temperature

T

and inverse wire length ${L}^{\ensuremath{-}1}$, and interpolates between these quantities in the crossover regimes.