Optical Clocks
Some of today's most advanced clocks are made up of large numbers of atoms lined up in a one-dimensional (1D) optical lattice. The numbers improve clock stability, but atomic interactions can limit accuracy. Campbell et al. loaded their fermionic strontium atoms into a 3D optical lattice. The low temperatures and strong interactions ensured that the atoms avoided one another, resulting in a neat pattern where each lattice site was occupied by exactly one atom. This ordering reduced the influence of interactions on the clock's accuracy, whereas the high density of atoms enabled by the 3D geometry improved the precision.
Science , this issue p. [90][1]
[1]: /lookup/doi/10.1126/science.aam5538
Optical Clocks
Some of today's most advanced clocks are made up of large numbers of atoms lined up in a one-dimensional (1D) optical lattice. The numbers improve clock stability, but atomic interactions can limit accuracy. Campbell et al. loaded their fermionic strontium atoms into a 3D optical lattice. The low temperatures and strong interactions ensured that the atoms avoided one another, resulting in a neat pattern where each lattice site was occupied by exactly one atom. This ordering reduced the influence of interactions on the clock's accuracy, whereas the high density of atoms enabled by the 3D geometry improved the precision.
Making a denser optical lattice clock Some of today's most advanced clocks are made up of large numbers of atoms lined up in a one-dimensional (1D) optical lattice. The numbers improve clock stability, but atomic interactions can limit accuracy. Campbell et al. loaded their fermionic strontium atoms into a 3D optical lattice. The low temperatures and strong interactions ensured that the atoms avoided one another, resulting in a neat pattern where each lattice site was occupied by exactly one atom. This ordering reduced the influence of interactions on the clock's accuracy, whereas the high density of atoms enabled by the 3D geometry improved the precision. Science , this issue p. 90
Optical lattice clocks with extremely stable frequency are possible when many atoms are interrogated simultaneously, but this precision may come at the cost of systematic inaccuracy resulting from atomic interactions. Density-dependent frequency shifts can occur even in a clock that uses fermionic atoms if they are subject to inhomogeneous optical excitation. However, sufficiently strong interactions can suppress collisional shifts in lattice sites containing more than one atom. We demonstrated the effectiveness of this approach with a strontium lattice clock by reducing both the collisional frequency shift and its uncertainty to the level of 10(-17). This result eliminates the compromise between precision and accuracy in a many-particle system; both will continue to improve as the number of particles increases.
We consider designs of optical lattice clocks in view of the quantum statistics, relevant atomic spins, and atom-lattice interactions. The first two issues lead to two optimal constructions for the clock: a one-dimensional (1D) optical lattice loaded with spin-polarized fermions and a 3D optical lattice loaded with bosons. By taking atomic multipolar interactions with the lattice fields into account, an "atomic motion insensitive" wavelength is proposed to provide a precise definition of the "magic wavelength." We then present a frequency comparison of these two optical lattice clocks: spin-polarized fermionic 87 Sr and bosonic 88 Sr prepared in 1D and 3D optical lattices, respectively. Synchronous interrogations of these two optical lattice clocks by the same probe laser allowed canceling out its frequency noise as a common mode noise to achieve a relative stability of 3 × 10 −17 for an averaging time of τ = 350 s. The scheme, therefore, provides us with a powerful means to investigate intrinsic uncertainty of the clocks regardless of the probe laser stability. We discuss prospects of the synchronous operation of the clocks on the measurement of the geoid height difference and on the search of constancy of fundamental constants.
Atomic Physics
Arrays of optical tweezers can be used to trap atoms, which can then be manipulated individually. Such arrays have shown promise in quantum simulation of many-body systems. Norcia et al. now demonstrate that they can also be used as a platform for optical clocks. The researchers lined up 10 optical tweezers in a one-dimensional array, where each tweezer held either one or zero atoms of strontium. The atoms were subjected to laser light whose frequency was tuned to a clock transition in strontium. By monitoring the number of atoms in each tweezer, the researchers measured a long coherence time of a few seconds. Increasing the number of tweezers should improve the figures of merit of this platform.
Science , this issue p. [93][1]
[1]: /lookup/doi/10.1126/science.aay0644
Techniques of modern quantum optics allows for the preparation of atoms in well controlled quantum states ideal for precision measurements and tests of fundamental laws of physics. We report on our recent progress with a highly stable and accurate optical atomic clock based on ultracold fermionic87Sr atoms confined in a one dimensional optical lattice. Currently, we have carried out a detailed evaluation of our clock at the 10−16level and can report stability at 2 x 10−15level at one second. At typical operating parameters for the clock we observe evidence of a density dependent clock shift. Operating the clock at a particular excitation ratio of ground state and excited clock state we observe a shift consistent with zero.
Rapid progress in the precision and accuracy of optical atomic clocks over the last decade has advanced the frontiers of timekeeping, metrology, and quantum science. However, the stabilities of most optical clocks remain limited by the local oscillator rather than the atoms themselves, leaving room for further progress. Here we implement a "multiplexed" one-dimensional optical lattice clock, in which spatially-resolved, movable ensembles of ultra-cold strontium atoms are trapped in the same optical lattice, interrogated simultaneously by a shared clock laser, and read-out in parallel. By performing synchronized Ramsey interrogations of ensemble pairs we observe atom-atom coherence times up to 26 seconds, a 270-fold improvement over the atom-laser coherence time, demonstrate a relative stability of 9.7(4)×10−18/τ (where τ is the averaging time in seconds), and reach a fractional uncertainty of 8.9(3)×10−20 after 3.3 hours of averaging. These results demonstrate that applications requiring ultra-high-precision comparisons between optical atomic clocks need not be limited by the stability of the local oscillator. With multiple ensemble pairs, we realize a miniaturized clock network consisting of 6 atom ensembles, resulting in 15 unique pairwise clock comparisons with relative stabilities below 3×10−17/τ. Finally, we demonstrate the capability to simultaneously load spatially-resolved, heterogeneous ensemble pairs of all four stable isotopes of strontium in a lattice. The unique capabilities offered by this platform pave the way for future studies of precision isotope shift measurements, spatially resolved characterization of limiting clock systematics, development of clock-based gravitational wave and dark matter detectors, and novel tests of relativity including measurements of the gravitational redshift at sub-centimeter scales.