Quantum Photonic Devices

Integrated single photon circuits with electrical light source (Conference Presentation)

Wolfram H. P. Pernice, Simone Ferrari

Published Sep 29, 2017• 0 citations

Abstract

Quantum photonic circuits based on nanophotonic components hold promise for overcoming scalability limitations in optical quantum systems. Functional systems will require the co-integration of single photon sources, detectors and tunable photonic components. Waveguide integrated single photon detectors based on superconducting nanowires (SNSPDs) have been shown to fulfill the demanding requirements for on-chip quantum photonics. Because they provide very wide optical detection bandwidth, their use with optically pumped single photon sources poses severe challenges for on-chip filtering. We overcome these challenges by co-integrating electrically driven single photon sources with superconducting detectors. Single photon sources with nanoscale footprint are realized by depositing electrically contacted carbon nanotubes (CNTs) across nanophotonic waveguides. CNTs under electrical current bias are shown to emit non-classical light which is coupled efficiently into the underlying photonic framework. The CNTs are shown to provide high count rates in the MHz range. The statistical characterization of the CNT light source crucially relies on the high timing resolution of the SNSPDs which allows for measuring photon statistics for emitters with sub-100ps lifetime. The combination of top-down nanofabrication with deposition by electrophoresis provides a waferscale approach for realizing non-classical circuits on chip. Such hybrid quantum photonic devices therefore hold promise for realizing complex integrated devices without additional optical input ports.

DOI: 10.1117/12.2275209

Related papers

Integrated Quantum Photonic Circuits with Electrically Driven Light Sources

Wolfram H. P. Pernice, Ralph Krupke, Felix Pyatkov

Electrically driven single photon sources coupled to waveguide devices offer exciting prospects for quantum photonic applications. Such emitters based on semiconducting carbon nanotubes allow scalable integration with nanophotonic circuits and can be characterized on chip using superconducting detectors.

European Conference on Optical CommunicationSep 1, 20170 citations

Superconducting single-photon detectors integrated with diamond nanophotonic circuits

Patrik Rath, Oliver Kahl, Simone Ferrari +7 more

Photonic quantum technologies hold promise to repeat the success of integrated nanophotonic circuits in non-classical applications. Using linear optical elements, quantum optical computations can be performed with integrated optical circuits and can therefore overcome the existing limitations in terms of scalability. In addition to passive optical devices for realizing photonic quantum gates, active elements, such as single-photon sources and single-photon detectors, are essential ingredients for future optical quantum circuits. Material systems that allow for the monolithic integration of all components are particularly attractive, including III-V semiconductors, silicon and diamond. Here, we demonstrate nanophotonic integrated circuits made from high-quality polycrystalline diamond thin films in combination with on-chip single-photon detectors. By using superconducting nanowires that are coupled evanescently to traveling waves, we achieve high detection efficiencies of up to 66% as well as low dark count rates and a timing resolution of 190 ps. Our devices are fully scalable and hold promise for functional diamond photonic quantum devices. The development of on-chip quantum circuitry progresses with the integration of single-photon detectors with diamond nanophotonic waveguides. Researchers based in Germany at Karlsruhe Institute of Technology and the Fraunhofer Institute of Applied Solid State Physics have fabricated superconducting niobium nitride nanowire detectors directly on top of diamond rib waveguides. This traveling wave design means that photons propagating in the diamond waveguides are coupled evanescently to the superconducting nanowires, allowing efficent on-chip detection of single photons. The small footprints of the detectors allow hundreds of detector circuits to be realized on a single chip. Furthermore, their fast response (they have a decay time of just 5.1 nanoseconds) allows operation at count rates of up to 200 megahertz and with a timing resolution of 190 picoseconds.

arXiv:1505.04251Light Science & ApplicationsOct 9, 201579 citations

Ultrafast single photon detectors (Conference Presentation)

Wolfram H. P. Pernice, Simone Ferrari

Nanophotonic integrated circuits are emerging as a promising platform for quantum photonics. A key building block are waveguide integrated detectors with superior performance. Detectors based on superconductor nanowires (SNSPDs) attached to optical waveguides have been shown to provide high efficiency and good timing performance, as well as broad bandwidth. To move towards applications in high bandwidth quantum communication and processing, ultrafast single-photon detectors with high efficiency are needed. The speed of meander type SNSPDs is limited because the required high absorption efficiency necessitates long nanowires deposited on top of the waveguide. This enhances the kinetic inductance and makes the detectors slow. We overcome this problem by aligning the nanowire perpendicular to the waveguide to realize devices with a length below 1 µm. By integrating the nanowire into a photonic crystal cavity, we recover high absorption efficiency, thus enhancing the detection efficiency by more than an order of magnitude. Our cavity enhanced superconducting nanowire detectors are fully embedded in silicon nanophotonic circuits and efficiently detect single photons at telecom wavelengths. The detectors possess sub-nanosecond decay (~ 120 ps) and recovery times (~ 510 ps), and thus show potential for GHz count rates at low timing jitter (~ 32 ps).

Optical Sensing, Imaging, and Photon Counting: From X-Rays to THzOct 11, 20170 citations

Integration of photonic integrated circuit functionalities with superconducting nanowire single photon detectors

Carsten Schuck

Superconducting Nanowire Single Photon Detectors (SNSPD) have set leading performance benchmarks in terms of detection efficiency, low noise operation, speed, and timing accuracy. Besides scaling up the numbers of individually addressable nanowire detector channels, integration with nanophotonic functionalities as well as optical and electrical multiplexing will be key to advance single photon counting applications, such as quantum key distribution, optical quantum information processing and simulations of sampling problems. Here we show how integration of SNSPDs with nanophotonic circuit components gives rise to novel use cases. We combine highperformance waveguide-integrated SNSPDs with nano-electromechanical phase-shifters, high speed electro-optic modulators, sub-wavelength grating structures, directional coupler networks, on-chip delay lines and highly efficient and broadband 3D-interconnects to optical fibers, achieving crucial active and passive functionalities for integrated quantum photonics. We showcase the capabilities and practical relevance of photonic integrated SNSPD solutions for the example of high-rate quantum key distribution receivers.

Quantum Computing, Communication, and SimulationMar 12, 20240 citations

On-chip detection of non-classical light by scalable integration of single-photon detectors

Faraz Najafi, Jacob Mower, Nicholas C. Harris +9 more

Photonic-integrated circuits have emerged as a scalable platform for complex quantum systems. A central goal is to integrate single-photon detectors to reduce optical losses, latency and wiring complexity associated with off-chip detectors. Superconducting nanowire single-photon detectors (SNSPDs) are particularly attractive because of high detection efficiency, sub-50-ps jitter and nanosecond-scale reset time. However, while single detectors have been incorporated into individual waveguides, the system detection efficiency of multiple SNSPDs in one photonic circuit-required for scalable quantum photonic circuits-has been limited to <0.2%. Here we introduce a micrometer-scale flip-chip process that enables scalable integration of SNSPDs on a range of photonic circuits. Ten low-jitter detectors are integrated on one circuit with 100% device yield. With an average system detection efficiency beyond 10%, and estimated on-chip detection efficiency of 14-52% for four detectors operated simultaneously, we demonstrate, to the best of our knowledge, the first on-chip photon correlation measurements of non-classical light.

arXiv:1405.4244Nature CommunicationsJan 9, 2015330 citations

Controlled integration of selected detectors and emitters in photonic integrated circuits

Ronan Gourgues, Iman Esmaeil Zadeh, Ali W. Elshaari +7 more

Integration of superconducting nanowire single-photon detectors and quantum sources with photonic waveguides is crucial for realizing advanced quantum integrated circuits. However, scalability is hindered by stringent requirements on high-performance detectors. Here we overcome the yield limitation by controlled coupling of photonic channels to pre-selected detectors based on measuring critical current, timing resolution, and detection efficiency. As a proof of concept of our approach, we demonstrate a hybrid on-chip full-transceiver consisting of a deterministically integrated detector coupled to a selected nanowire quantum dot through a filtering circuit made of a silicon nitride waveguide and a ring resonator filter, delivering 100 dB suppression of the excitation laser. In addition, we perform extensive testing of the detectors before and after integration in the photonic circuit and show that the high performance of the superconducting nanowire detectors, including timing jitter down to 23 ± 3 ps, is maintained. Our approach is fully compatible with wafer-level automated testing in a cleanroom environment.

arXiv:1811.03979Optics ExpressFeb 1, 201929 citations