Microchip ion traps with high magnetic field gradients for microwave quantum logic

David Murgia

Published Nov 1, 2016• 0 citations

Abstract

This thesis describes experimental work towards the development of a trapped-ion quantum computer based on microchip ion traps and long-wavelength radiation, using magnetic field gradients. The relationship between experimental parameters and two-qubit gate fidelity is investigated for microchips with two different static magnetic field gradient generation methods. For current-carrying wires and under-chip permanent magnets, optimum ion heights of 110 μm and 200 μm are found respectively. Construction of an experiment capable of demonstrating high-fidelity gates is reported, including innovations for the use of microchip ion traps with permanent magnets. The development of a vacuum system for versatile microchip experiments is described, including new methods for impedance-matched RF delivery, in-vacuum filtering and liquid nitrogen microchip cooling. Protection of both the microchip surface from atomic flux and of ions from the charged imaging viewport are both investigated in detail. A new preparation framework for microchip ion traps before their use in experiments is developed. In order to remove unwanted deposited layers on the microchips, a process of multiple chemical treatments is used. In addition, these characterisation efforts lead to refinement of the microfabrication process for future microchips. The application of large currents to microchips is of fundamental importance to scalable trapped-ion quantum computing using static magnetic field gradients. As part of the characterisation process, currents of ≈ 10A are successfully applied to microfabricated current-carrying wires, demonstrating the viability of these structures for generation of local magnetic fields and gradients in a quantum computing device. The operation of a microchip ion trap experiment with under-chip permanent magnets for a high magnetic field gradient (≈ 140Tm−1) is described. The successful trapping of ytterbium-174 and -171 ions is reported, as well as their use to measure and optimise the ion trap parameters. The thesis concludes with consideration of the expected future results from the ongoing operation of the experiment.

DOI: 10.25560/48045

Related papers

Development of microfabricated ion traps for scalable microwave quantum technology

Bjoern Lekitsch

Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.

May 18, 20150 citations

Towards high-fidelity microwave driven multi-qubit gates on microfabricated surface ion traps

Tomas Navickas

For quantum computers to become a reality, high-fidelity logic gates are required to be implemented on a scalable architecture. The IQT group follows an approach based on using a magnetic field gradient and microwave radiation to implement the required operations. To demonstrate their scalability to many quantum bit systems, these operations need to be implemented on micro-fabricated surface ion traps. In this thesis I describe the technologies I developed for surface ion traps with magnetic field gradients. This entailed the design, assembly and operation of two surface ion trap systems with permanent magnets for generating large magnetic field gradients of 140T=m, novel in-vacuum radio-frequency and microwave emitters for implementing high-speed quantum state manipulation and development of robust and reliable laser control systems required for stable long-term experimental operation.

Sep 21, 20180 citations

Towards scalable quantum technologies

Christopher Knapp (7143212)

In the current landscape of quantum technologies, great efforts are being made to overcome the technical challenges of realising robust and scalable devices for use in a wide variety of potentially impactful applications. This thesis therefore describes the design considerations and assembly of a purpose-built vacuum system for the realisation of high-fidelity quantum logic operations on a microfabricated surface ion trap device. The device consists of an X-junction structure with embedded current-carrying wires, which will allow for the demonstration of scalable, laser-free, magnetic field gradient-based quantum logic. Initial characterisation experiments and observations pertaining to this novel microchip design are presented, as well as demonstrations of coherent quantum operations using the 171Yb+ qubit both with and without the current-carrying wire generated magnetic field gradient. In addition, this work also shows how this static magnetic field gradient design for scalable quantum computing may be leveraged for use in metrology. By utilising the inherent gradient-induced coupling of the trapped ion qubit’s transition frequency to it’s position in this architecture, the ion becomes extremely sensitive to electric field perturbations, enabling the implementation of many well-established quantum electric and magnetic field sensing techniques. Furthermore, the nature of this novel sensing scheme permits high sensitivities within the unique DC − kHz bandwidth, which many current quantum electrometers are unable to reach. Measurements of DC and AC electric fields yield unprecedented sensitivities for the sensing of phase coherent electric fields in a linear Paul trap. In addition, an implementation of a common magnetometry technique to measure electric field noise is also exhibited. Finally, it is shown that a purpose built system for the implementation of this scheme has the potential to improve sensitivities by up to six orders of magnitude, enabling the possibility of utilising this scheme for a wide variety of applications'

Aug 15, 20250 citations

Design and fabrication of high magnetic field gradients towards fault tolerant two-qubit gates with trapped ions using long-wavelength radiation

Eamon Standing

In this thesis, I discuss coherent manipulation of a trapped ytterbium ion using long wavelength radiation and the results of experiments towards the performance of a two-ion entanglement gate using a static magnetic field gradient of 23.3(6) T/m to create coupling between an ion's internal state and its motion. After using these experiments to explain the requirements for high-fidelity entanglement operations, I continue by examining existing methods for creating this gradient, the current limiting factor in producing the highest fidelity operations. This includes a full characterisation of the gradients produced by symmetric scheme permanent magnets and buried current carrying wires including development of scaling laws in order to create optimum gradients for a given trap geometry. I continue by proposing a new method by which extremely high gradients over 100 T/m can be created for planar chip traps with minimal modification to an existing experiment. These gradients are tailored for axial as well as radial entanglement schemes and aim to show that the technology exists in order to produce a two-qubit gate over the fault tolerant threshold. Subsequently, I discuss the implementation of this new scheme in an experiment before constructing the apparatus to accurately align a chip with these magnets and documenting their installation into two new experimental setups. This includes a preliminary measurement of the gradient produced by an imperfect setup outside of vacuum which verifies those simulated at ~ 110 T/m. Lastly, I discuss the prospects of on-chip magnetic materials and propose a new method which when sufficiently developed should allow for high magnetic field gradients to be produced on-chip at higher ion heights than when solely using current carrying wires. Additionally this scheme should allow for switchable gradients with maximised stability in geometries previously not possible to create.

Jul 12, 20170 citations

Design and fabrication of ion traps for a scalable microwave quantum computer

Weikang Fan

This thesis describes the experimental work towards the development of a scalable quantum computer based on microfabricated ion trap using long-wavelength radiation and magnetic field gradient. There are three key elements in implementing such a quantum computer: the junction trap to shuttle ions, the structure to generate high gradient magnetic field and the structure to induce strong microwave coupling to the ions. A new dynamic simulation tool was developed addressing the problems faced by static solvers. This tool was used to aid the design and optimisation of an X junction geometry allowing the ions to be shuttled with minimised motional heating gain. The design and fabrication techniques were reported on the structure to generate a high gradient magnetic field. A discussion was given on the design of producing microwave and maximise the coupling to the cold ions. A review was given on the far-field methods and near-field methods. A novel design was reported where the single-qubit gate is predicted to be 45 times faster than a conventional setup. Two essential topics on the microfabrication of a reliable scalable quantum computer unit were discussed: breakdown and RF loss. Investigation using numerical simulations showed that dielectric can breakdown due to high voltage and local heating which are results of impedance mismatch. Microfabrication processes were improved, high-quality films were reported to have twice as much breakdown voltages. The mechanisms of RF loss were reviewed. Novel structures and smooth electroplating technique were developed to minimise the loss. A low loss ion trap was produced and tested. An experimentally observed anomalous glow discharge phenomenon was reported and investigated.

Jan 28, 20200 citations

High-fidelity quantum logic on trapped ions with microwave radiation

A. M. Lawrence

This thesis describes the development of technology and experimental techniques for scalable trapped-ion quantum computing. An architecture for scalable quantum computing is presented in which 171Yb+ ions are trapped in linear R.F. Paul traps and their hyper-fine states are used to form qubits. Quantum logical operations can be carried out by applying R.F. and microwave fields. This thesis presents significant improvements in the experimental setup used for quantum computing, as well as new theoretical developments and experimental demonstrations of new high- fidelity quantum control methods. A new procedure for carrying out high- delity two qubit gates using static magnetic eld gradients and resonant microwave elds is presented. It is shown that this has the potential to enable signi cantly improved delities compared to current methods. Improved methods for measurement and statistical analysis in trapped-ion experiments are also shown. These should enable more accurate measurement of two-qubit gate delities, which becomes increasingly important as delities increase. A new system for generating arbitrary R.F. and microwave waveforms is presented, including a bespoke software control system allowing the user to de ne custom pulse sequences, which represents a signi cant improvement in the scalability of the quantum control system. Experimental developments towards a system for carrying out on-chip trapped-ion quantum logic in a static magnetic eld gradient are also presented. A new technique for generating multi-level control methods is introduced, based on reducing a multi-level system to an e ective two-level system. High- delity quantum control methods generated using this technique, which form a will form a key part of the scalable quantum computing architecture, are implemented experimentally.

May 1, 20192 citations