Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Tomography and its role in Quantum Computation

William J. Munro, Daniel F. V. James, Andrew G. White, Paul G. Kwait

Published Mar 21, 2001• 3 citations
OpenAlex

Abstract

Quantum computation depends on quantum entanglement, a correlation between subsystems that cannot occur classically. A variety of theoretical measures exist for quantifying the degree entanglement in such schemes, all of which are functions of the system density matrix. How can the entanglement be measured experimentally? Using quantum tomography techniques developed for two photon entangled states, the density matrix can be reconstructed from the appropriate experimental data. In this case the state tomography gives the complete characterization of the physical system (for the relevant degree of freedom, such as spin or polarization). It gives information on both the degree of nonclassical correlation, that is entanglement, as well as the amount of decoherence in the system. In this proceedings we discuss the general state tomography procedure required to characterize a few qubit quantum computer, for any architecture.

Related papers

Qudit quantum-state tomography

Rob Thew, Kae Nemoto, Andrew G. White +1 more

Recently quantum tomography has been proposed as a fundamental tool for prototyping a few qubit quantum device. It allows the complete reconstruction of the state produced from a given input into the device. From this reconstructed density matrix, relevant quantum information quantities such as the degree of entanglement and entropy can be calculated. Generally, orthogonal measurements have been discussed for this tomographic reconstruction. In this paper, we extend the tomographic reconstruction technique to two new regimes. First, we show how nonorthogonal measurements allow the reconstruction of the state of the system provided the measurements span the Hilbert space. We then detail how quantum-state tomography can be performed for multiqudits with a specific example illustrating how to achieve this in one- and two-qutrit systems.

arXiv:quant-ph/0201052•Physical Review A•Jul 16, 2002•347 citations

Measurement of the Entanglement of Two Superconducting Qubits via State Tomography

Matthias Steffen, M. Ansmann, Radoslaw C. Bialczak +7 more

Demonstration of quantum entanglement, a key resource in quantum computation arising from a nonclassical correlation of states, requires complete measurement of all states in varying bases. By using simultaneous measurement and state tomography, we demonstrated entanglement between two solid-state qubits. Single qubit operations and capacitive coupling between two super-conducting phase qubits were used to generate a Bell-type state. Full two-qubit tomography yielded a density matrix showing an entangled state with fidelity up to 87%. Our results demonstrate a high degree of unitary control of the system, indicating that larger implementations are within reach.

Science•Sep 7, 2006•553 citations

Emission tomography for quantum state measurement in matter

Ian A. Walmsley, Leon J. Waxer

Emission tomography provides a method for the characterization of quantum states of those degrees of freedom of material quantum systems that are coupled to electronic states of the system. In such systems, the time-dependent fluorescence spectrum contains complete information about the non-electronic degree of freedom. Phase-space or, in certain cases, density matrix representations of the state can be reconstructed from the spectrum using standard methods of computer-assisted tomography or linear algebra. The principles and implementation of this procedure are described in detail and applied to the specific example of the reconstruction of the quantum state of the vibrational mode of a diatomic molecule excited into a non-stationary wavepacket state.

Journal of Physics B Atomic Molecular and Optical Physics•May 14, 1998•39 citations

Quantum Measurement on a Budget

Dylan H. Mahler

Quantum computation - the use of quantum systems as bits, or qubits, to perform computation - has been proven to be exponentially faster than what is thought possible with classical computation for several tasks. Quantum computers have the unique ability to store an amount of information that is exponential in the number of constituent particles used to encode that information. This property, which is arguably where quantum computers derive their power, makes it very difficult to characterize quantum systems. In order to fully characterize an unknown quantum state, a series of measurements must be performed on it and the state deduced from the results of those measurements. This process, called quantum tomography, is known to require exponential resources in the number of qubits. Both the number of measurements - the measurement complexity - and the number of times each measurement must be repeated - the sample complexity - present serious challenges when performing tomography. In addition, the measurement apparatus itself, which is usually a quantum system, must be characterized leading to even more experimental complexity. Here, I present three experiments which aim to reduce the experimental complexity of quantum tomography. The first aims to reduce the number of measurements needed to locate the decoherence-free subspaces of a noisy quantum channel. The process of locating these subspaces, which would normally require full process tomography, is performed with quadratically fewer measurement settings. The second experiment aims to characterize both an uncalibrated measurement apparatus and an unknown quantum state at the same time. With a specific model of measurement, it is found that an uncalibrated parameter of the measurement can be directly extracted using a single measurement. In the third experiment, I perform an experiment in which the optimal sample complexity for quantum state tomography is obtained using adaptivity: the ability to change measurement settings part way through an experiment. All three experiments were performed using the polarization degree of freedom of photons generated by spontaneous parametric downconversion. The source of photon pairs and the measurement techniques used are described in detail, along with the theory of quantum distinguishability and its relevance to tomography.

•Jun 1, 2015•0 citations

Multi-qubit State Tomography with Few Pauli Measurements

Xudan Chai, Teng Ma, Qihao Guo +3 more

In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, Quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is less practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multi-qubit quantum states. Furthermore, this schema was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternatively effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.

arXiv:2305.19873•May 31, 2023•0 citations

Efficient quantum state tomography with auxiliary systems

Wenlong Zhao, Da Zhang, Huili Zhang +2 more

Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of $O(d^2)$, significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.

arXiv:2507.16532•Physical Review A•Mar 2, 2026•0 citations
Quantum computation depends on quantum entanglement, a correlation between subsystems that cannot occur classically. A variety of theoretical measures exist for quantifying the degree entanglement in such schemes, all of which are functions of the system density matrix. How can the entanglement be measured experimentally? Using quantum tomography techniques developed for two photon entangled states, the density matrix can be reconstructed from the appropriate experimental data. In this case the state tomography gives the complete characterization of the physical system (for the relevant degree of freedom, such as spin or polarization). It gives information on both the degree of nonclassical correlation, that is entanglement, as well as the amount of decoherence in the system. In this proceedings we discuss the general state tomography procedure required to characterize a few qubit quantum computer, for any architecture.
Recently quantum tomography has been proposed as a fundamental tool for prototyping a few qubit quantum device. It allows the complete reconstruction of the state produced from a given input into the device. From this reconstructed density matrix, relevant quantum information quantities such as the degree of entanglement and entropy can be calculated. Generally, orthogonal measurements have been discussed for this tomographic reconstruction. In this paper, we extend the tomographic reconstruction technique to two new regimes. First, we show how nonorthogonal measurements allow the reconstruction of the state of the system provided the measurements span the Hilbert space. We then detail how quantum-state tomography can be performed for multiqudits with a specific example illustrating how to achieve this in one- and two-qutrit systems.
Demonstration of quantum entanglement, a key resource in quantum computation arising from a nonclassical correlation of states, requires complete measurement of all states in varying bases. By using simultaneous measurement and state tomography, we demonstrated entanglement between two solid-state qubits. Single qubit operations and capacitive coupling between two super-conducting phase qubits were used to generate a Bell-type state. Full two-qubit tomography yielded a density matrix showing an entangled state with fidelity up to 87%. Our results demonstrate a high degree of unitary control of the system, indicating that larger implementations are within reach.
Emission tomography provides a method for the characterization of quantum states of those degrees of freedom of material quantum systems that are coupled to electronic states of the system. In such systems, the time-dependent fluorescence spectrum contains complete information about the non-electronic degree of freedom. Phase-space or, in certain cases, density matrix representations of the state can be reconstructed from the spectrum using standard methods of computer-assisted tomography or linear algebra. The principles and implementation of this procedure are described in detail and applied to the specific example of the reconstruction of the quantum state of the vibrational mode of a diatomic molecule excited into a non-stationary wavepacket state.
Quantum computation - the use of quantum systems as bits, or qubits, to perform computation - has been proven to be exponentially faster than what is thought possible with classical computation for several tasks. Quantum computers have the unique ability to store an amount of information that is exponential in the number of constituent particles used to encode that information. This property, which is arguably where quantum computers derive their power, makes it very difficult to characterize quantum systems. In order to fully characterize an unknown quantum state, a series of measurements must be performed on it and the state deduced from the results of those measurements. This process, called quantum tomography, is known to require exponential resources in the number of qubits. Both the number of measurements - the measurement complexity - and the number of times each measurement must be repeated - the sample complexity - present serious challenges when performing tomography. In addition, the measurement apparatus itself, which is usually a quantum system, must be characterized leading to even more experimental complexity. Here, I present three experiments which aim to reduce the experimental complexity of quantum tomography. The first aims to reduce the number of measurements needed to locate the decoherence-free subspaces of a noisy quantum channel. The process of locating these subspaces, which would normally require full process tomography, is performed with quadratically fewer measurement settings. The second experiment aims to characterize both an uncalibrated measurement apparatus and an unknown quantum state at the same time. With a specific model of measurement, it is found that an uncalibrated parameter of the measurement can be directly extracted using a single measurement. In the third experiment, I perform an experiment in which the optimal sample complexity for quantum state tomography is obtained using adaptivity: the ability to change measurement settings part way through an experiment. All three experiments were performed using the polarization degree of freedom of photons generated by spontaneous parametric downconversion. The source of photon pairs and the measurement techniques used are described in detail, along with the theory of quantum distinguishability and its relevance to tomography.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, Quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is less practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multi-qubit quantum states. Furthermore, this schema was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternatively effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of O(d2)O(d^2)O(d2), significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.