A long-distance quantum network that could enable distributed quantum computing and unconditionally secure communication will require a quantum memory capable of supporting entanglement swapping over long distances. The memory qubit must preserve its entanglement to the communication qubit sent to a repeater for at least long enough to swap entanglement with an adjacent node. The most important figures-of-merit for a quantum memory are: fidelity, entanglement rate, and memory lifetime. Though many varieties of memories and repeaters are currently being researched (for a review see [1]) it remains an outstanding challenge to develop one that simultaneously meets all the necessary criteria to enable a practical long distance quantum network. We propose to use laser-cooled and trapped rubidium atoms, with Rydberg excitations, coupled to an optical cavity, to address these issues.
A long-distance quantum network that could enable distributed quantum computing and unconditionally secure communication will require a quantum memory capable of supporting entanglement swapping over long distances. The memory qubit must preserve its entanglement to the communication qubit sent to a repeater for at least long enough to swap entanglement with an adjacent node. The most important figures-of-merit for a quantum memory are: fidelity, entanglement rate, and memory lifetime. Though many varieties of memories and repeaters are currently being researched (for a review see [1]) it remains an outstanding challenge to develop one that simultaneously meets all the necessary criteria to enable a practical long distance quantum network. We propose to use laser-cooled and trapped rubidium atoms, with Rydberg excitations, coupled to an optical cavity, to address these issues.
Quantum communication between two remote locations often involves remote parties sharing an entangled quantum state. At present, entanglement distribution is usually performed using photons transmitted through optical fibers. However, the absorption of light in the fiber limits the communication distances to less than 200 km, even for optimal photon telecom wavelengths. To increase this distance, the quantum repeater idea was proposed. In the quantum repeater architecture, one divides communication distance into segments of the order of the attenuation length of the photons and places quantum memory nodes at the intermediate locations. Since the photon loss between intermediate locations is low, it is possible then to establish entanglement between intermediate quantum memory nodes. Once entanglement between adjacent nodes is established, one can extend it over larger distances using entanglement swapping.\n\nThe long coherence time of a quantum memory is a crucial requirement for the quantum repeater protocol. It is obvious that the coherence time of a quantum memory should be much longer that the time it takes for light to travel between remote locations. For a communication distance l = 1000 km, the corresponding time is t = l/c = 3.3 ms. One can show that for a simple repeater protocol and realistic success probabilities of entanglement generation, the required coherence time should be on the order of many seconds, while for the more complicated protocols that involve multiplexing and several quantum memory cells per intermediate node, the required coherence time is on the order of milliseconds.\n\nIn this thesis, I describe a quantum memory based on an ensemble of rubidium atoms confined in a one-dimensional optical lattice. The use of the magnetically- insensitive clock transition and suppression of atomic motion allows us to increase coherence time of the quantum memory by two-orders of magnitude compared to previous work. I also propose a method for determining the Zeeman content of atomic samples. In addition, I demonstrate the observation of quantum evolution under continuous measurement. The long quantum memory lifetime demonstrated in this work opens the way for scalable processing of quantum information and long distance quantum communication.
Quantum communication aims at generating and distributing qubits between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storage and/or emission of photonic states is necessary and represents a crucial step towards the realisation of a quantum network. An outstanding challenge of quantum communication is to implement quantum memories for photonic qubits, combining long storage time with high fidelity between the input and output states, and good efficiency. Moreover, to be compatible with quantum network applications, such as quantum repeaters, these memories have to enable heralded storage and on-demand read-out. Cold atomic ensembles hold promise for satisfying both these prerequisites, and are therefore a good candidate as storage medium, offering a compromise between different benchmarks. We are setting up an experiment intended to map polarisation qubits onto an optically pumped cold atomic ensemble of rubidium serving as our quantum memory device. In a first development, our quantum memory device will be operated in the single photon emission regime so as to implement, together with an entangled photon-pair source based on guided-wave optics, the quantum teleportation scheme.
Quantum communication aims at generating and distributing qubits between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storage of photonic states is necessary and represents a crucial step towards the realisation of a quantum network. An outstanding challenge of quantum communication is to implement quantum memories for photonic qubits, combining long storage time with high fidelity between the input and output states, and good efficiency. Moreover, to be compatible with quantum network applications, such as quantum repeaters, these memories have to enable heralded storage and on-demand read-out. Cold atomic ensembles hold promise for satisfying both these prerequisites, and are therefore a good candidate as storage medium, offering a compromise between different benchmarks. We are setting up an experiment intended to map polarisation qubits onto an optically pumped cold atomic ensemble of rubidium serving as our quantum memory device.
Quantum communication aims at generating and distributing qubits between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storage of photonic states is necessary and represents a crucial step towards the realisation of a quantum network. An outstanding challenge of quantum communication is to implement quantum memories for photonic qubits, combining long storage time with high fidelity between the input and output states, and good efficiency. Moreover, to be compatible with quantum network applications, such as quantum repeaters, these memories have to enable heralded storage and on-demand read-out. Cold atomic ensembles hold promise for satisfying both these prerequisites, and are therefore a good candidate as storage medium, offering a compromise between different benchmarks. We are setting up an experiment intended to map polarisation qubits onto an optically pumped cold atomic ensemble of rubidium serving as our quantum memory device.
Quantum communication aims at generating and distributing entangled pairs of photonic qubits (or flying qubits) at a telecom wavelength between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storing of entangled states is necessary and represents a crucial step towards the realization of a real quantum network. A current outstanding challenge is thus to implement quantum memories for entangled qubits, carried by telecom photons, that combine high efficiency, long storage time and near-perfect fidelity between the input and output states. With this project, our goal is to merge the techniques of telecom wavelengths qubit distribution with quantum storage at shorter wavelength (typically for atomic transitions). Our idea is to map, via a quantum interface, polarization entangled qubits at a telecom wave- length onto a cold atomic ensemble, serving as a quantum memory device.
Quantum communication aims at generating and distributing qubits between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storage of photonic states is necessary and represents a crucial step towards the realisation of a quantum network. An outstanding challenge of quantum communication is to implement quantum memories for photonic qubits, combining long storage time with high fidelity between the input and output states, and good efficiency. Moreover, to be compatible with quantum network applications, such as quantum repeaters, these memories have to enable heralded storage and on-demand read-out. Cold atomic ensembles hold promise for satisfying both these prerequisites, and are therefore a good candidate as storage medium, offering a compromise between different benchmarks. We are setting up an experiment intended to map polarisation qubits onto an optically pumped cold atomic ensemble of rubidium serving as our quantum memory device.