Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Spatial and temporal distribution of phase slips in Josephson junction chains

Adem Ergül, Thomas Weißl, Jan Johansson, Jack Lidmar, David B. Haviland

Published Sep 7, 2017• 9 citations
Publisher

Abstract

The Josephson effect, tunnelling of a supercurrent through a thin insulator layer between two superconducting islands, is a phenomena characterized by a spatially distributed phase of the superconducting condensate. In recent years, there has been a growing focus on Josephson junction devices particularly for the applications of quantum metrology and superconducting qubits. In this study, we report the development of Josephson junction circuit formed by serially connecting many Superconducting Quantum Interference Devices, SQUIDs. We present experimental measurements as well as numerical simulations of a phase-slip center, a SQUID with weaker junctions, embedded in a Josephson junction chain. The DC transport properties of the chain are the result of phase slips which we simulate using a classical model that includes linear external damping, terminating impedance, as well as internal nonlinear quasiparticle damping. We find good agreement between the simulated and the experimental current voltage characteristics. The simulations allow us to examine the spatial and temporal distribution of phase-slip events occurring across the chains and also the existence of travelling voltage pulses which reflect at the chain edges.

DOI
10.1038/s41598-017-11670-7

Related papers

Nonlinear dynamics of Josephson Junction Chains and Superconducting Resonators

Adem Ergül

This thesis presents the results of the experimental studies on two kindof Superconducting circuits: one-dimensional Josephson junction chains andsuperconducting coplanar waveguide (CPW) resonators. One-dimensionalJosephson junction chains are constructed by connecting many Superconducting quantum interference devices (SQUIDs) in series. We have studied DC transport properties of the SQUID chains and model their nonlineardynamics with Thermally Activated Phase-Slips (TAPS). Experimental andsimulated results showed qualitative agreement revealing the existence of auniform phase-slipping and phase-sticking process which results in a voltage-independent current on the dissipative branch of the current-voltage char-acteristics (IVC). By modulating the effective Josephson coupling energy ofthe SQUIDs (EJ ) with an external magnetic field, we found that the ratio EJ /EC is a decisive factor in determining the qualitative shape of theIVC. A quantum phase transition between incoherent Quantum Phase Slip, QPS (supercurrent branch with a finite slope) to coherent QPS (IVC withwell-developed Coulomb blockade) via an intermediate state (supercurrentbranch with a remnant of Coulomb blockade) is observed as the EJ /EC ratio is tuned. This transition from incoherent QPS to the intermediate-statehappens around R0 ∼ RQ (RQ = h/4e^2 = 6.45kΩ). We also fabricated structured chains where a SQUID at the middle of the chain (central SQUID) has different junction size and loop area compared to other SQUIDs in the chain. Results showed that with these structured chains it is possible to localize andtune the amplitude of both TAPS and QPS at the central SQUID. The second part of the thesis describes the fabrication process and themeasurement results of superconducting CPW resonators. Resonators withdifferent design parameters were fabricated and measured. The transmissionspectra showed quality factors up to, Q ∼ 5 × 10^5 . We have observed bendingof the resonance curves to the lower frequencies due to existence of a nonlinear kinetic inductance. The origin of the nonlinear kinetic inductance isthe nonlinear relation between supercurrent density, Js, and superfluid veloc-ity, vs , of the charge carriers on the center line of the resonators. A simplemodel based on the Ginzburg-Landau theory is used in order to explain ob-served nonlinear kinetic inductance and estimates using this model showedgood agreement with the experimental results.

•Jan 1, 2013•3 citations

Thermal Activation of Superconducting Josephson Junctions

Aditya P. Devalapalli

Superconducting quantum circuits (SQCs) are being explored as model systems for scalable quantum computing architectures. Josephson junctions are extensively used in superconducting quantum interference devices (SQUIDs) and in persistent-current qubit systems. Noise excitations, however, have a critical influence on their dynamics. Thus, the primary focus of this research was to investigate the effects of thermal ac-tivation on the superconducting properties of Josephson junctions. Specifically, ther-mal noise tends to result in a range of switching currents, values less than the critical current at which a junction switches from the superconducting to the normal state. First, a general review of superconductivity concepts is given, including a treatment of the Josephson phenomena. Next, I describe some of my work on characterizing the current-voltage traces of Josephson junctions tested at 4 K with a Multi-Chip Probe (MCP). Then, I describe thermal activation theory and examine the equations useful for modeling switching current distributions. The Josephson junctions of a SQUID with a ramped bias current were tested for numerous temperatures T < 4.5 K (and

•Jan 1, 2007•0 citations

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips

Mallika T. Randeria, Thomas Hazard, Agustín Di Paolo +12 more

Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1 / f . Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024

arXiv:2404.02989•PRX Quantum•Aug 27, 2024•12 citations

Superconducting quantum interference device with frequency-dependent damping: Readout of flux qubits

Timothy L. Robertson, B. L. T. Plourde, T. Hime +4 more

Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance ${C}_{s}$ and resistance ${R}_{s}$ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.

Physical Review B•Jul 11, 2005•23 citations

Voltage-controlled coupling of flux states in superconducting rings

Ahmed Kenawy, Wim Magnus, M. V. Miloševıć +1 more

Abstract Superconducting circuits represent a versatile playground to explore novel quantum phenomena and a platform to realize quantum bits (qubits). Superconducting qubits hinge on the coherent tunneling of Cooper pairs across the insulating barrier of a Josephson junction. This qubit implementation is, however, plagued with the variability of the fabricated junction, along with the need for magnetic tunability of the qubit transition frequency. Alternatively, a dual to the Josephson effect—referred to as quantum phase slips—allows for a coherent coupling of flux states and has been used to build phase-slip qubits. In this paper, we propose coupling flux states of a superconducting ring using a bias voltage. By solving the time-dependent Ginzburg–Landau equations, we demonstrate that the bias voltage locally suppresses the density of Cooper pairs, thereby forming a weak link where phase slips occur. Moreover, we show that a voltage-biased superconducting ring serves as an electrically-controlled magnetic memory. The work presented in this paper is an important step towards realizing electrically-tunable superconducting devices, such as qubits and SQUIDs.

Superconductor Science and Technology•Nov 20, 2019•0 citations
The Josephson effect, tunnelling of a supercurrent through a thin insulator layer between two superconducting islands, is a phenomena characterized by a spatially distributed phase of the superconducting condensate. In recent years, there has been a growing focus on Josephson junction devices particularly for the applications of quantum metrology and superconducting qubits. In this study, we report the development of Josephson junction circuit formed by serially connecting many Superconducting Quantum Interference Devices, SQUIDs. We present experimental measurements as well as numerical simulations of a phase-slip center, a SQUID with weaker junctions, embedded in a Josephson junction chain. The DC transport properties of the chain are the result of phase slips which we simulate using a classical model that includes linear external damping, terminating impedance, as well as internal nonlinear quasiparticle damping. We find good agreement between the simulated and the experimental current voltage characteristics. The simulations allow us to examine the spatial and temporal distribution of phase-slip events occurring across the chains and also the existence of travelling voltage pulses which reflect at the chain edges.
This thesis presents the results of the experimental studies on two kindof Superconducting circuits: one-dimensional Josephson junction chains andsuperconducting coplanar waveguide (CPW) resonators. One-dimensionalJosephson junction chains are constructed by connecting many Superconducting quantum interference devices (SQUIDs) in series. We have studied DC transport properties of the SQUID chains and model their nonlineardynamics with Thermally Activated Phase-Slips (TAPS). Experimental andsimulated results showed qualitative agreement revealing the existence of auniform phase-slipping and phase-sticking process which results in a voltage-independent current on the dissipative branch of the current-voltage char-acteristics (IVC). By modulating the effective Josephson coupling energy ofthe SQUIDs (EJ ) with an external magnetic field, we found that the ratio EJ /EC is a decisive factor in determining the qualitative shape of theIVC. A quantum phase transition between incoherent Quantum Phase Slip, QPS (supercurrent branch with a finite slope) to coherent QPS (IVC withwell-developed Coulomb blockade) via an intermediate state (supercurrentbranch with a remnant of Coulomb blockade) is observed as the EJ /EC ratio is tuned. This transition from incoherent QPS to the intermediate-statehappens around R0 ∼ RQ (RQ = h/4e^2 = 6.45kΩ). We also fabricated structured chains where a SQUID at the middle of the chain (central SQUID) has different junction size and loop area compared to other SQUIDs in the chain. Results showed that with these structured chains it is possible to localize andtune the amplitude of both TAPS and QPS at the central SQUID. The second part of the thesis describes the fabrication process and themeasurement results of superconducting CPW resonators. Resonators withdifferent design parameters were fabricated and measured. The transmissionspectra showed quality factors up to, Q ∼ 5 × 10^5 . We have observed bendingof the resonance curves to the lower frequencies due to existence of a nonlinear kinetic inductance. The origin of the nonlinear kinetic inductance isthe nonlinear relation between supercurrent density, Js, and superfluid veloc-ity, vs , of the charge carriers on the center line of the resonators. A simplemodel based on the Ginzburg-Landau theory is used in order to explain ob-served nonlinear kinetic inductance and estimates using this model showedgood agreement with the experimental results.
Superconducting quantum circuits (SQCs) are being explored as model systems for scalable quantum computing architectures. Josephson junctions are extensively used in superconducting quantum interference devices (SQUIDs) and in persistent-current qubit systems. Noise excitations, however, have a critical influence on their dynamics. Thus, the primary focus of this research was to investigate the effects of thermal ac-tivation on the superconducting properties of Josephson junctions. Specifically, ther-mal noise tends to result in a range of switching currents, values less than the critical current at which a junction switches from the superconducting to the normal state. First, a general review of superconductivity concepts is given, including a treatment of the Josephson phenomena. Next, I describe some of my work on characterizing the current-voltage traces of Josephson junctions tested at 4 K with a Multi-Chip Probe (MCP). Then, I describe thermal activation theory and examine the equations useful for modeling switching current distributions. The Josephson junctions of a SQUID with a ramped bias current were tested for numerous temperatures T < 4.5 K (and
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.
Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1 / f . Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024
Recent experiments on superconducting flux qubits, consisting of a superconducting loop interrupted by Josephson junctions, have demonstrated quantum coherence between two different quantum states. The state of the qubit is measured with a superconducting quantum interference device (SQUID). Such measurements require the SQUID to have high resolution while exerting minimal backaction on the qubit. By designing shunts across the SQUID junctions appropriately, one can improve the measurement resolution without increasing the backaction significantly. Using a path-integral approach to analyze the Caldeira-Leggett model, we calculate the narrowing of the distribution of the switching events from the zero-voltage state of the SQUID for arbitrary shunt admittances, focusing on shunts consisting of a capacitance Cs{C}_{s}Cs​ and resistance Rs{R}_{s}Rs​ in series. To test this model, we fabricated a dc SQUID in which each junction is shunted with a thin-film interdigitated capacitor in series with a resistor, and measured the switching distribution as a function of temperature and applied magnetic flux. After accounting for the damping due to the SQUID leads, we found good agreement between the measured escape rates and the predictions of our model. We analyze the backaction of a shunted symmetric SQUID on a flux qubit. For the given parameters of our SQUID and realistic parameters for a flux qubit, at the degeneracy point we find a relaxation time of $113\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, which limits the decoherence time to $226\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$. Based on our analysis of the escape process, we determine that a SQUID with purely capacitive shunts should have narrow switching distributions and no dissipation.
Abstract Superconducting circuits represent a versatile playground to explore novel quantum phenomena and a platform to realize quantum bits (qubits). Superconducting qubits hinge on the coherent tunneling of Cooper pairs across the insulating barrier of a Josephson junction. This qubit implementation is, however, plagued with the variability of the fabricated junction, along with the need for magnetic tunability of the qubit transition frequency. Alternatively, a dual to the Josephson effect—referred to as quantum phase slips—allows for a coherent coupling of flux states and has been used to build phase-slip qubits. In this paper, we propose coupling flux states of a superconducting ring using a bias voltage. By solving the time-dependent Ginzburg–Landau equations, we demonstrate that the bias voltage locally suppresses the density of Cooper pairs, thereby forming a weak link where phase slips occur. Moreover, we show that a voltage-biased superconducting ring serves as an electrically-controlled magnetic memory. The work presented in this paper is an important step towards realizing electrically-tunable superconducting devices, such as qubits and SQUIDs.