We present switching experiments performed on pillar microcavities containing a collection of quantum dots (QDs). Switching events are probed using QD luminescence, after ultrafast optical injection of free carriers. We observe large switching amplitudes (by as much as 20 linewidths), as well as differential switching of the pillar modes under inhomogeneous pumping. Through transient coupling of QDs with a cavity mode, cavity switching is used for the first time to generate ultrashort (down to 4ps!) pulses of spontaneous emission. Beyond this application, cavity switching can be used more generally to control CQED effects in the time domain.
We present switching experiments performed on pillar microcavities containing a collection of quantum dots (QDs). Switching events are probed using QD luminescence, after ultrafast optical injection of free carriers. We observe large switching amplitudes (by as much as 20 linewidths), as well as differential switching of the pillar modes under inhomogeneous pumping. Through transient coupling of QDs with a cavity mode, cavity switching is used for the first time to generate ultrashort (down to 4ps!) pulses of spontaneous emission. Beyond this application, cavity switching can be used more generally to control CQED effects in the time domain.
Though QD arrays have initially been mostly studied in an attempt to improve semiconductor lasers, much attention has been recently devoted to the revolutionary prospects opened by the unique properties of single QDs. These artificial atoms allow to mimic in solid-state systems some of the quantum optics experiments performed on atoms since the early 80’s. Recent demonstrations of coherent control experiments on QDs illustrate this fruitful analogy [10]. We will focus here our discussion on the impact of QDs on two other fields, solid-state cavity quantum electrodynamics (CQED) and the generation of quantum states of light. A single QD can be used to emit triggered single photon pulses and photon pairs, whereas its narrow emission spectrum permits to implement microcavities very efficiently to tailor its emission properties. By combining both kind of effects, it is possible to control simultaneously the number of emitted photons as well as their quantum state and to build a solid-state singlemode source of single photons (singlemode S4P) as proposed [11] and demonstrated recently by our group [12]. This novel device represents the ultimate step in a field which has been extremely active in the last 15 years, spontaneous emission (SE) control in optoelectronic devices using confined electronic and/or photonic systems [13]. Before reviewing the development of this single mode S4P, based on a single QD in a pillar microcavity, we will briefly discuss its potential applications in the field of quantum information processing and quantum communications (QIPC).
Semiconductor nanostructures such as quantum dots (QDs) have offered unique opportunities to investigate quantum optical effects in solid-state systems. These include quantum interference, Rabi oscillations, as well as photon antibunching, and were previously observable only in isolated atoms or ions. In addition, QDs can be integrated into optical microcavities, making them attractive for applications in quantum information processing and high efficiency quantum light sources. Despite much progress towards these goals, one area that was little explored is coherent control of such solid-state quantum emitters in cavities. The main technical hurdle lies in overcoming the laser background scattering. By using a sample structure in which QDs are embedded in a planar Fabry-Perot cavity and by using an orthogonal excitation geometry, we have achieved a nearly complete elimination of laser background scattering. This in turn allows us to show resonantly controlled light emission of quantum dots in the cavity including (a) Rabi flopping using pulse control, (b) direct observation of Mollow triplets in the frequency domain, and (c) simultaneously measured first-order and second order photon-photon correlations.
We have carried out an extensive series of experiments on coherent control of semiconductor quantum microcavities. In these experiments, a phase-locked femtosecond optical pulse pair is used to excite the lower normal mode (cavity polariton), thereby controlling the reflection of a signal pulse tuned to the upper normal mode. Such a controlled reflection may be used as an all-optical switch with picosecond switching time. We have demonstrated that the effect of the microcavity is to provide a huge enhancement of the coherently controlled response compared to bare quantum wells. We have investigated in detail the microscopic physical processes responsible for the nonlinear optical response; the measured response fits well with theories based on the electron-hole Hamiltonian in the coherent-X(5) and 2nd-Born approximations. The physical limits to the coherent control are determined by excitation-induced dephasing; this limits the applicability of the switch in practical terms. We have discovered that the use of phase-locked excitation pulses is that one can generate novel intraband coherences in the quantum wells, arising from true quantum correlations between the cavity field and the carrier populations. The discovery of this effect was perhaps the first genuinely quantum optical effect observed in semiconductor microcavities.
We study the detailed propagative characteristics of optical pulses in photonic band-gap (PBG) waveguides, coupled near resonantly to inhomogeneously broadened distributions of quantum dots. The line centers of the quantum-dot (QD) distributions are placed near a sharp discontinuity in the local electromagnetic density of states. Using finite-difference time-domain (FDTD) simulations of optical pulse dynamics and independent QD susceptibilities associated with resonance fluorescence, we demonstrate subpicosecond switching from pulse absorption to pulse amplification using steady-state optical holding and gate fields with power levels on the order of 1 milliwatt. In the case of collective response of QDs within the periodic dielectric microstructure, the gate power level is reduced to 200 microwatt for room temperature operation. In principle, this enables 200 Gbits per second optical information processing at wavelengths near 1.5 microns in various wavelength channels. The allowed pulse bandwidth in a given waveguide channel exceeds 0.5 THz allowing switching of subpicosecond laser pulses without pulse distortion. The switching contrast from absorption to gain is governed by the QD oscillator strength and dipole dephasing time scale. We consider dephasing time scales ranging from nanoseconds (low-temperature operation) to one picosecond (room-temperature operation). This all-optical transistor action is based on simple Markovian models of single-dot and collective-dot inversion and switching by coherent resonant pumping near the photon density of states discontinuity. The structured electromagnetic vacuum is provided by two-mode waveguide architectures in which one waveguide mode has a cutoff that occurs, with very large Purcell factor, near the QDs resonance, while the other waveguide mode exhibits nearly linear dispersion for fast optical propagation and modulation. Unlike optical switching based on Kerr nonlinearities in an optical cavity resonator, switching power levels and switching speeds for our QD device are not inversely proportional to cavity quality factors.
Impressive progress has been achieved in controlling the spontaneous emission rate for emitters in Nanophotonic structures, such as microcavities, photonic crystals and nano-antennas. In all cases, however, the modification of the emission is stationary in time. Thus, the emission rate is time-independent and the distribution of photon emission times are stochastic and follow an exponential distribution in the weak coupling regime. In this paper, by using fast all-optical switching of a microcavity, the cavity resonance is tuned within tens of picosesonds. This drastically changes the local optical density of states at the emission frequency within the emission lifetime of the emitters. This paper theoretically studied an ensemble of two-level sources with a time dependent decay rate and have derived the excited state population and emitted intensity as a function of time for continuous wave and pulsed excitation. Deterministic bursts of dramatically enhanced or inhibited emission intensity within short intervals. Thereby, we control the photon distribution to show behavior that strongly deviates from single exponential decay. This can be used to protect quantum information systems against decoherence and to realize non-Markovian dynamics in cavity quantum electrodynamics.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved